Instruction/ maintenance manual of the product PWM-503 Premier Mounts
Go to page of 9
PLASMA DISPLAY MOUNT MODEL INSTALLATION MANUAL For service and parts contact: Premier Mounts 3130 E. Miraloma Ave Anaheim, CA USA 92806 Phone : (800) 368-9700 Fax : (800) 832-4888 Visit us at : www.
- 2 - o Safety & precautions o Mount diagrams o Parts List o Optional Adapters o Installing the mounting bracket o Installing the mount o Electrical o Securing the mount o Additional security Cont.
- 3 - The wall or ceiling structure must be capable of supporting at least five (5) times the weight of plasm a display. If not, the wall or ceiling must be reinforced. Proper installation procedure by qualified personnel as outlined in the install ations instructions must be adhered to.
- 4 - 16.000 5.460 1.250 3.250 16.000 4.500 1.750 18.500 1.125 8.000 8.000 5.000 1.000 4.500 5.460 2.865 3.500 e c A b 19.771 F d TILT BACK PLATE MOUNTING BRACKET PART#: PSB-TBP MATERIAL : 12 (GA) CRS COLOR : Black powder coat A . Lag bolt access slot.
- 5 - o Phillips screwdri ver o Drill gun o Soft material or a blanket o Pencil o ¼" drill bit o Level o Measuring tape o Wrench with a 1/2" socket o Stud finder o PCA-1 – 4.
- 6 - Step 1 CAUTION : The plasma displays are fragile and hea vy. At least two (2) qualifi ed perso nnel are strongly recommend ed for the installation o f this product. Invert the plasm a display and s et it on a flat an d soft material suc h as (blankets, fo am, cloth etc.
- 7 - floor floor 16" Step 3 Select the area where the plasma will be installed and make sure it can support the weight standards (see warning on page 3). Locate the 16" wood stud center s behind the wall using a (commercially available) stud finder and mark the center of the studs when found.
- 8 - floor floor To determine the desired viewing height, use the center slot opening in the wall mount as a center reference for the plasma tel evision when mounted. Once the height is determined, use the bubble level to insure that the bracket is level.
- 9 - floor floor Securing the mount Step 5 Warning : The plasma display is heavy and 2 people are needed to li ft and install it. Fai lure to do so could result in ser ious personal i njur y. Before placing the plasma on the wall recheck all hardware for proper tightness and security.
An important point after buying a device Premier Mounts PWM-503 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Premier Mounts PWM-503 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Premier Mounts PWM-503 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Premier Mounts PWM-503 you will learn all the available features of the product, as well as information on its operation. The information that you get Premier Mounts PWM-503 will certainly help you make a decision on the purchase.
If you already are a holder of Premier Mounts PWM-503, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Premier Mounts PWM-503.
However, one of the most important roles played by the user manual is to help in solving problems with Premier Mounts PWM-503. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Premier Mounts PWM-503 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
