Instruction/ maintenance manual of the product PSM-402T Premier Mounts
Go to page of 10
PLASMA DISPLAY MOUNT MODEL INSTALLATION MANUAL VISIT US AT WWW.MOUNTS.COM 3130 E. Miraloma Av e. Anaheim, CA 92806 Pho ne: 800 368-970 0 Fax: 800 832-48 88.
2 o Safety & precautions o Mount diagrams o Parts List o Optional Adapters o Installing the PSM plasma mount o Securing the universal flat & tilt mounts o Electrical o Mount Interlocking o Che.
3 The wall or ceiling structure must be capable of supporting at least five (5) times the weight of plasm a display. If not, the wall or ceiling must be reinforced. Proper installa tion procedure by qualified personnel a s outlined in the install ations instructions must be adhered to.
4 10.750 4.500 1.750 0.688 4.500 14.324 12.000 2.125 0.750 0.104 1.528 1.528 0.500 0.375 Ø0.375 (x4) Ø2.500 a b c d 16.000 19.500 8.750 8.750 17.500 2.125 16.000 5.460 1.250 3.250 16.000 4.500 1.750 18.500 1.125 8.000 8.000 5.000 1.000 4.500 5.460 2.
5 Standard hardware PSM-Series Mounting hardware PSM-Mount o Phillips screwdriver o Drill gun o Soft material or a blanket o Pencil o ¼" drill bit o Level o Measuring tape o Wrench with a 1/2" socket o Stud finder o 1/4"-3/8" Toggler bolts : Used for hollow concrete block wall mounting.
6 A Plasma display B PSM-Mount C PSM-Hardware (See chart on pg 5) D M10 x 12 (mm) Hex screws, flat washers (4,4,8 Pack) E PSB-UWFB Universal flat mount F M6 Security screws used on tilt, ceiling, cart, floor stand applications.
7 Step 1 CAUTION : The plasma displays are fragile and hea vy. At least two (2) qualified personnel are strongly recommended for the install ation o f this product. Invert the plasm a display and set it on a sof t, flat surface to prevent any d amage to the plas ma display.
8 Step 3 Securing the flat mount CAUTION : The plasma displays are fragile and heavy. At least two (2) qua lified personnel are strongly recommende d for the installation o f this product. All plasma models vary depending on the manufacturer and some are c entered and others are not.
9 Step 3 Securing the flat mount To determine the desired vi ewing height, use the center slot opening in the wall mount as a center reference for the plasma tel evision when mounted. Once t he height is determined, use the bubble level to insure that the bracket is level.
10 Mount interlocking Step 5 Warning : The plasma display is heavy and 2 people are needed to lift and inst all it. Failure t o do so could result in serious personal injury. Before placing the plasma on the wall recheck all hardware for pr oper tightness and security.
An important point after buying a device Premier Mounts PSM-402T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Premier Mounts PSM-402T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Premier Mounts PSM-402T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Premier Mounts PSM-402T you will learn all the available features of the product, as well as information on its operation. The information that you get Premier Mounts PSM-402T will certainly help you make a decision on the purchase.
If you already are a holder of Premier Mounts PSM-402T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Premier Mounts PSM-402T.
However, one of the most important roles played by the user manual is to help in solving problems with Premier Mounts PSM-402T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Premier Mounts PSM-402T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
