Instruction/ maintenance manual of the product PSD-BW Premier Mounts
Go to page of 22
INSTALLATION MANUAL PSD-BW/PSD-BWL Nesting Cart Series NORTH AMERICA EUROPE AUSTRALIA,NEW ZEALAND, OCEANIA (Distributor) 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada – Phone: 800-3.
PSD-BW/L Installation Instructions Page - 2 - Table of Contents WARRANTY ...................................................................................................................... .............................. - 2 - CONTACT PREM IER MOUNTS .
PSD-BW/L Page - 3 - Installation Instructions Warning Statements WARNING: PREMIER MOUNTS DOES NOT WARRANT A GAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUC T FOR PURPOSES OTHE R THAN THOS.
PSD-BW/L Installation Instructions Page - 4 - Parts List Congratulations on purchasing the PSD-BW/PSD-BW L Ne sting Cart. The PSD-BW/PSD-BWL Nesting Cart is shipped with all proper installation ha rdware and components. Please verify that none of these parts are m issing and/or damaged before assembly.
PSD-BW/L Page - 5 - Installation Instructions BW Base Castor Installation (Fi gure 1) Unpack the PSD-BW/L Nesting Cart and review any WA RNING statem ents that apply to the installation. Select the desired location fo r the PSD-BW /L Nesting Cart. Figure 1 1.
PSD-BW/L Installation Instructions Page - 6 - PSD-SPA Installation (Figure 3) NOTE : Use of the PSD-SPA will de pend on the mount that is us ed. All PSM/CTM Series mounts require using the PSD-S PA. The Revolut ion Series, USA and UFA Mounts, h owever, do not require the use o f the PSD-SPA .
PSD-BW/L Page 7 Installation Instructions Optional Mounting Configuration s CTM-Series Revolution Series USA/UFA Series.
PSD-BW/L Installation Instructions Page 8 Technical Specifications All measurements are in i nches (mm). Notes PSD-BW PSD-BWL.
Installation Instructions Installation Instructions Installation Instructions Installation Instructions Rotary T ilt Mount Model: R TM-L NOR TH AMERICA 3130 East Miraloma A venue Anaheim, CA 92806 USA.
R TM-L T ABLE OF CONTENTS W arranty 2 Contact Premier Mounts 2 W arning S tatements 3 Parts List 4 Installation T ools 4 Thread Depth Indicator 7 Mount Installation 8 Universal Mounting Bracket Instal.
R TM-L Installation Instructions Page 3 W arning S tatements W ARNING : PREMIER MOUNTS DOES NOT W ARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FO.
R TM-L Page 4 Installation Instructions Parts List NOTE : This mount is shipped with all installation hardware and components. Make sure that none of these parts are missing and/ or damaged before beginning installation. If there are parts missing and/or damaged, please stop and contact Premier Mounts (800) 368-9700.
Installation Instructions Page 5 R TM-L (Qt y 8 ) M6 x 20 (Qty 8) (Qty 4) (Qty 8 ) (Qty 8) (Qty 8) (Qt y 8 ) M6 x 30 M6 x 45 (Qty 8 ) M8 x 25 M8 x 20 (Qty 8 ) (Qty 8) (Qty 8) (Qt y 8 ) (Qty 8) M8 x 35 M8 x 30 (Qty 8) M8 x 70 M8 x 45 (Qty 8) M4 x 16 M4 x 25 M5 x 12 M5 x 20 M5 x 25 M5 x 16 M5 x 50 M6 x 16 (Qty 8) (Qty 8 ) Parts List (Cont.
Page 6 Installation Instructions R TM-L Parts List (Cont.) Nylon spacers and flat washers' actual size NOTE : The nylon spacers may be stacked to achieve proper spacing.
R TM-L Installation Instructions Page 7 Thr ead Depth Indicator 1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the flat panel to make sure the inserts measure the same full depth and mark it (Figure 1).
R TM-L Page 8 Installation Instructions NOTE : The installation instructions that are contained in this manual refer only to the R TM-L. The installation instructions for the various bases that are used with the R TM-L will be included with those products.
R TM-L Installation Instructions Page 9 Universal Mounting Bracket Assembly 1. Place the universal bracket bar and the universal brackets on a flat surface. 2. Slide the universal brackets onto the universal bracket bar (as shown below) with the set screws facing up.
R TM-L Page 10 Installation Instructions 3. Lower the universal bracket bar and display into the cradle (as to the left). NOTE : The circular portion of the universal bracket bar must rest inside the nylon sleeve. If seated improperly , the operation of the R TM-L will be hindered and the nylon sleeve will become damaged.
R TM-L Installation Instructions Page 1 1 Display Orientation The R TM-L will allow the user to adjust the display a full 360°. W ARNING : BEFORE ROT A TING THE R TM-L, MAKE SURE THA T THE M6 KNURL KNOB IS SECUREL Y F ASTENED TO THE R TM-L. ALSO, PLEASE MAKE SURE YOU ALLOW ENOUGH CABLE AND WIRE CLEARANCE FOR FULL ROT A TION.
R TM-L Page 12 Installation Instructions Optional Configurations T echnical Specifications All measurements are in inches (mm). PSD-TS PSD-BW PSD-EB.
RTM-L Adde ndum Page – 13 – Installation Instructions RTM-L AD DEN DUM: The RTM- L is shipped with the hand crank in the st orage position. The hand crank must be remov ed in order for the RTM-L to be adjusted. After the adjustments have been made, return the hand cr ank to the storage posit ion.
1 2 I N S T A L L A T I O N M A N U A L www. idt .com .au Phone: 1300 666 099 PSD-SHB Black Shelf Step 1 Open the box and remove all components. Step 2 Slide the shelf over the poles, select the desired height and lock the height by tightening t he four (4) Allen head screws using the hex key.
An important point after buying a device Premier Mounts PSD-BW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Premier Mounts PSD-BW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Premier Mounts PSD-BW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Premier Mounts PSD-BW you will learn all the available features of the product, as well as information on its operation. The information that you get Premier Mounts PSD-BW will certainly help you make a decision on the purchase.
If you already are a holder of Premier Mounts PSD-BW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Premier Mounts PSD-BW.
However, one of the most important roles played by the user manual is to help in solving problems with Premier Mounts PSD-BW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Premier Mounts PSD-BW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
