Instruction/ maintenance manual of the product GB-PLEN1 Premier Mounts
Go to page of 10
INSTALLATION INSTRUCTIONS GB-PLEN1 Equipment Enclosure for Plenum Ceilings NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada – Phone: 800-368-9700 Fax: 800-832-4888 EUROPE.
Page 2 Installation Instructions Table of Contents W arning Statements GB-PLEN1 PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD. THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE.
Installation Instructions Page 3 Parts List This accessory is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact Premier Mounts (800-368-9700).
Page 4 Installation Instructions GB-PLEN1 Installation with PP-FCTA Step 1. Loosen the wing nuts (do not remove) on the upper adapter plate. GB-PLEN1 Step 2. Slide the mounting rails (threaded holes facing up) between the upper adapter plate and the PP-FCTA.
Installation Instructions Page 5 GB-PLEN1 Step 5. Locate the four (4) mounting holes on the mounting rails. Step 6. Align the mounting slots on the GB-PLEN1 with the mounting holes on the mounting rails. Step 7. Use four (4) M5 x 10mm screws to attach the GB-PLEN1 to the mounting rails.
Page 6 Installation Instructions GB-PLEN1 Step 8. Place the padlock hasp on the inside of the GB-PLEN1 (optional). Completed Attachment Padlock Hasp (optional) M5 x 10mm Screws Step 9. Use two (2) M5 x 10mm Phillips screws to attach the padlock hasp to the GB-PLEN1.
Installation Instructions Page 7 GB-PLEN1 GB-PLEN1 Installation with PP-FCMA Step 1. Loosen the four (4) mounting screws that are located on the underside of the PP-FCMA. Do not completely remove these screws. Step 2. Slide the mounting rails (threaded holes facing up) between the adapter plate and the PP-FCMA.
Page 8 Installation Instructions GB-PLEN1 Completed Attachment Padlock Hasp (optional) M5 x 10mm Screws Step 6. Place the padlock hasp on the inside of the GB-PLEN1 (optional). Step 7. Use two (2) M5 x 10mm Phillips screws to attach the padlock hasp to the GB-PLEN1.
Installation Instructions Page 9 GB-PLEN1 Technical Specifications All measurements are in inches(mm)..
Page 10 Installation Instructions Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product.
An important point after buying a device Premier Mounts GB-PLEN1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Premier Mounts GB-PLEN1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Premier Mounts GB-PLEN1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Premier Mounts GB-PLEN1 you will learn all the available features of the product, as well as information on its operation. The information that you get Premier Mounts GB-PLEN1 will certainly help you make a decision on the purchase.
If you already are a holder of Premier Mounts GB-PLEN1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Premier Mounts GB-PLEN1.
However, one of the most important roles played by the user manual is to help in solving problems with Premier Mounts GB-PLEN1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Premier Mounts GB-PLEN1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
