Instruction/ maintenance manual of the product EST200 Premier Mounts
Go to page of 14
Single-Stud/Dual-Stud Short-Throw Projector W all Mount Model: EST100/EST200 9530-01 1-001-0X Rev .1 INST ALLA TION INSTRUCTIONS NOR TH AMERICA 1321 S.
Page 2 Visit the Premier Mounts website at http://www .mounts.com Installation Instructions T able of Contents PREMIER MOUNTS DOES NOT W ARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS P.
Installation Instructions Visit the Premier Mounts website at http://www .mounts.com Page 3 Projector Arm (Qty 1) Mount Carriage (Qty 1) Phillips Screwdriver ⅛˝ Drill Bit Electronic Stud Finder Dri.
Page 4 Visit the Premier Mounts website at http://www .mounts.com Installation Instructions EST100/EST200 THE EXACT CENTER OF THE STUD MUST BE LOCA TED FOR CORRECT AND SAFE INST ALLA TION. Do NOT over-tighten lag bolts when attaching the mount to the wall.
Installation Instructions Visit the Premier Mounts website at http://www .mounts.com Page 5 EST100/EST200 Step 2 Step 1 Step 3 Step 4 Use an electronic stud nder (not supplied) to locate the center of the stud that is in the wall.
EST100/EST200 Page 6 Visit the Premier Mounts website at http://www .mounts.com Installation Instructions Step 5 Put the projector arm cover plate on the projector arm. Projector Arm Projector Arm Cover Plate Step 6 Place the projector arm assembly within the desired mounting slots on the back plate.
Installation Instructions Visit the Premier Mounts website at http://www .mounts.com Page 7 EST100/EST200 Attaching the Mount Carriage Selecting the Mounting Hardware Insert a small straw or toothpick into the threaded inserts found on the bottom or top of the projector .
Page 10 Visit the Premier Mounts website at http://www .mounts.com Installation Instructions EST100/EST200 Step 2 Attach the mounting legs to the projector using the corresponding mounting hardware. Do not tighten the mounting hardware at this time.
Installation Instructions Visit the Premier Mounts website at http://www .mounts.com Page 1 1 EST100/EST200 Step 5 Position the legs accordingly for best conguration. Y ou may raise or lower each leg independently by turning the leveling barrels.
Page 12 Visit the Premier Mounts website at http://www .mounts.com Installation Instructions EST100/EST200 Step 7 Insert one (1) Barrel Cap (except for the security barrel) into the end of each leveling barrel. Go to the “Attaching the Mount Carriage to the Projector Arm” section on page 15.
EST100/EST200 Attaching the Mount Carriage to the Projector Arm Insert and slide the mount carriage along the projector arm to the desired position. Step 1 Projector not shown Step 2 Once you have the desired position, use one (1) M5 x 10mm security screw to tighten the mount carriage in place.
Page 14 Visit the Premier Mounts website at http://www .mounts.com Installation Instructions EST100/EST200 Cable Routing (Optional) Remove the plastic cover(s) from the cable routing openings. Route cables and wiring through the openings then out the back or bottom near the wall.
EST100/EST200 Mount Adjustment After the projector has been installed, the projector must then be adjusted. T o adjust the projector: Loosen the M5 set screw using the M5 Allen wrench (both sides). Adjust the projector to the correct position.
EST100/EST200 Page 16 Visit the Premier Mounts website at http://www .mounts.com Installation Instructions Premier Mounts intends to make this manual accurate and complete.
An important point after buying a device Premier Mounts EST200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Premier Mounts EST200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Premier Mounts EST200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Premier Mounts EST200 you will learn all the available features of the product, as well as information on its operation. The information that you get Premier Mounts EST200 will certainly help you make a decision on the purchase.
If you already are a holder of Premier Mounts EST200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Premier Mounts EST200.
However, one of the most important roles played by the user manual is to help in solving problems with Premier Mounts EST200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Premier Mounts EST200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
