Instruction/ maintenance manual of the product CPD10WALLARM Premier Mounts
Go to page of 14
INST ALLA TION INSTRUCTIONS NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888 Other Locations Phone: (001).
CPD10W ALLARM Page 2 Visit Premier Mounts website at http://www .mounts.com Installation Instructions Contact Premier Mounts with any questions: (800) 368-9700 techsupport@mounts.com Contents Weight Capacity Maximum Projector Weight: 50lbs. THE W ALL STRUCTURE MUST BE CAP ABLE OF HOLDING FIVE (5) TIMES THE WEIGHT OF THE PROJECT OR.
CPD10W ALLARM Installation Instructions Visit Premier Mounts website at http://www .mounts.com Page 3 Parts List Installation T ools The following tools may be required, dependent upon your particular installation. These tools are not provided by Premier Mounts, but you can purchase them at your local hardware store.
CPD10W ALLARM Page 4 Visit Premier Mounts website at http://www .mounts.com Installation Instructions Measure distance from center of lens to the top of the bracket (C). Add the distance from the ground to the top of the screen (A). Add the projector manufacturers recommended offset from the projector manual (B).
CPD10W ALLARM Installation Instructions Visit Premier Mounts website at http://www .mounts.com Page 5 THE EXACT CENTER OF THE STUD MUST BE LOCA TED FOR CORRECT AND SAFE INST ALLA TION. Do NOT overtighten lag bolts when attaching the mount to the wall.
CPD10W ALLARM Page 6 Visit Premier Mounts website at http://www .mounts.com Installation Instructions Use four (4) 5 16 ˝ x 3” lag bolts and four (4) fl at washers to mount the wall plate to the wooden studs. Use a ½” socket and socket wrench to fi nish this step.
CPD10W ALLARM Installation Instructions Visit Premier Mounts website at http://www .mounts.com Page 7 Locate the mounting hook cutout on the top of the wall plate. T ilt the arm slightly and gently insert the mounting hooks into the mounting hook cutouts.
CPD10W ALLARM Page 8 Visit Premier Mounts website at http://www .mounts.com Installation Instructions Slide the extension arm into the open end of the CPD10W ALLARM (the front of the mount). Adjust length so that the center of the adjustable mounting bracket matches the throw distance calibration.
CPD10W ALLARM Installation Instructions Visit Premier Mounts website at http://www .mounts.com Page 9 Adjustable Mounting Bracket Installation (cont.) Secure and fi ngertighten two (2) M6 x 16mm security head screws.
CPD10W ALLARM Page 10 Visit Premier Mounts website at http://www .mounts.com Installation Instructions Step 2 Projector Bracket Installation Invert the projector and place it on a soft, fl at surface. Remove any foot levelers that might prevent bracket installation.
CPD10W ALLARM Installation Instructions Visit Premier Mounts website at http://www .mounts.com Page 1 1 Please review the Operator ’s Manual that came packaged with your projector before attaching the upper mounting bracket.
CPD10W ALLARM Page 12 Visit Premier Mounts website at http://www .mounts.com Installation Instructions The storage feature may be used to store electronic components. There is an accessible door on each side of the storage enclosure. It may be securely held shut with the use of four (4) M5 x 8mm security head screws.
CPD10W ALLARM Installation Instructions Visit Premier Mounts website at http://www .mounts.com Page 13 Electronic Components Cables CPD10W ALLARM Cable Opening Projector Connections Cable Opening The cable access holes are located at the end of the short throw mount and on the wall plate.
CPD10W ALLARM Page 14 Visit Premier Mounts website at http://www .mounts.com Installation Instructions Premier Mounts intends to make this manual accurate and complete.
An important point after buying a device Premier Mounts CPD10WALLARM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Premier Mounts CPD10WALLARM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Premier Mounts CPD10WALLARM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Premier Mounts CPD10WALLARM you will learn all the available features of the product, as well as information on its operation. The information that you get Premier Mounts CPD10WALLARM will certainly help you make a decision on the purchase.
If you already are a holder of Premier Mounts CPD10WALLARM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Premier Mounts CPD10WALLARM.
However, one of the most important roles played by the user manual is to help in solving problems with Premier Mounts CPD10WALLARM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Premier Mounts CPD10WALLARM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
