Instruction/ maintenance manual of the product AM3-B Premier Mounts
Go to page of 15
INSTALLATION INSTRUCTIONS AM3/AM3-B Universal Swingout Arm NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada – Phone: 800-368-9700 Fax: 800-832-4888 EUROPE Swallow House, .
Page 2 Installation Instructions Table of Contents PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNE.
Installation Instructions Page 3 Parts List This wall mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact Premier Mounts (800-368-9700).
Page 4 Installation Instructions M4 x 16 M8 x 70 M8 x 35 (Qty 8 ) (Qty 8) (Qty 8) (Qty 8) (Qty 8) M8 x 30 M8 x 25 (Qty 8) M6 x 30 M8 x 2 0 (Qty 8) (Qty 8) (Qty 8) (Qty 8) (Qty 4 ) (Qty 8) M6 x 20 (Qty.
Installation Instructions Page 5 The nylon spacers may be stacked to achieve proper spacing. 5/16" Flat washers (metal ) 1/4" Nylon spacer s (Qty 8) (small ) (Qty 8) 1/2" Nylon spacers .
Page 6 Installation Instructions Thread Depth Indicator 1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the fl at panel to make sure the inserts measure the same full depth and mark it (Figure 1). 2. Locate the correct diameter screw for the thread insert.
Installation Instructions Page 7 WHEN MOUNTING THE AM3, THE SIDE THA T THE SWINGOUT ARM IS LOCA TED ON MUST HA VE A LAG BOL T MOUNTED ON A T LEAST ONE SIDE (SEE FIGURE 1), T OP AND BOTTOM. Mount Orientation The AM3/AM3-B Plasma Mount has the built-in capability of mounting with the swingout arm on either the left or right-hand side.
Page 8 Installation Instructions Mount Installation AM3/AM3-B Before proceeding with the mount installation, you should already have the mounting holes pre-drilled. Please use the template (supplied) and follow the instructions. For ease of installation, it is recommended that two people perform the installation.
Installation Instructions Page 9 AM3/AM3-B Nose Piece Orientation Step 1 . Once the mount has been oriented and mounted to the wall, remove the nose piece by removing the tensions bolts. After loosening the tension bolts, be sure that the nose piece is held together tightly before rotating.
AM3/AM3-B Universal Mounting Bracket Assembly Step 1 . Place the universal bracket bar and the universal brackets on a flat surface. Step 2 . Slide the universal brackets onto the universal bracket bar (as shown in Figure 9) with the set screws facing up.
AM3/AM3-B Attaching the Display ONCE THE UNIVERSAL BRACKET BAR ASSEMBLY HAS BEEN ATTACHED TO THE DISPLAY, IT IS RECOMMENDED THAT TWO PEOPLE MOUNT THE DISPLAY, AS THE UNIT IS HEAVY AND, IF DROPPED, WILL DAMAGE THE MOUNT, THE DISPLAY, AND/OR PERSONNEL. Figure 10 Figure 11 Step 1 .
AM3/AM3-B Page 12 Installation Instructions Securing the Display Once the two units have been secured together, the two (2) M6 x 30mm Phillips Head locking screws must be installed in the note d location (Figure 14) to prevent any movement.
AM3/AM3-B Installation Instructions Page 13 Tilt Positioning To adjust the display, loosen the tension bolts no more than ½ turn, make the adjustments and then tighten the tension bolts. When tilt positioning is needed to adjust the display, place a hand at the top corner of the display and the other hand at the bottom of the display (Figure 15).
AM3/AM3-B Page 14 Installation Instructions Technical Specification All measurements are in inches(mm)..
AM3/AM3-B Installation Instructions Page 15 Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product.
An important point after buying a device Premier Mounts AM3-B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Premier Mounts AM3-B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Premier Mounts AM3-B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Premier Mounts AM3-B you will learn all the available features of the product, as well as information on its operation. The information that you get Premier Mounts AM3-B will certainly help you make a decision on the purchase.
If you already are a holder of Premier Mounts AM3-B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Premier Mounts AM3-B.
However, one of the most important roles played by the user manual is to help in solving problems with Premier Mounts AM3-B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Premier Mounts AM3-B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
