Instruction/ maintenance manual of the product EFX556i Precor
Go to page of 114
OPTIONS BACK OK HEART RA TE ENTER CLEAR 123 456 789 0 PROGRAMS WARMUP F A TBURN CARDIO PEAK HIGH SmartRate CALORIES MANUAL WEIGHT LOSS HEART RA TE PERFORMANCE INTERVAL V ARIETY Before beginning any tness program, see yo ur physician for a thorough physical examination.
.
Important Safety Instructions When using Precor equipment, always take basic precautions, including the following: y y y y y y y y y y Read all instructions before using the equipment. These instructions are written to educa te patrons and other users in the proper use of the equipment.
y y y y y y y Never operate the equipment if it is damaged, not w orking properly, when it has been droppe d, or has been immersed in water. Return the equipment to a service center for examination and repair. Keep the power cord or optiona l power adapter and plug away from heated surfaces.
Educating Users Take time to educate users on the safety instructions found in both the User’s Reference Manual and Product Owner’s Manual . Explain to your club or fac ility patrons that they should: y y y y Hold onto a stationary handrail or handlebar while stepping onto the equipment or when getting comf ortably seated on the cycle.
Radio Frequency Interference (RFI) Federal Communications Commission, Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provid e reasonable protection against harmful interference in a commercia l installation.
Treadmill Grounding Instructions The treadmill must be grounded. If the equipment malfunctions or breaks down, grounding provides a path of least resistance for electric current, which reduces t he risk of electrical shock. The treadmill has a power cord ha ving an equipment-grounding conductor and a grounding plug.
Product Owner's Manual: Im portant Safety Instructions 6 Obtaining Service You should not attempt to se rvice the equipment except for maintenance tasks described in th is manual. For information about product operation or service, see the Precor web site at www.
Table of Contents Important Safety Instructions ............................................ 1 Safety Code..................................................................................... 2 Safety Approval .........................................
Treadmill Safety Features Before allowing users on Precor equipment, review the Important Safety Instructions found at the beginning of this manual. You should also teach your patrons ho w to safely use the equipment following the guidelines in Educating Users .
Product Owner's Manual: Treadmill Safety Features 9 Turning the Treadmill On and Off To turn the treadmill On and Off, use the power switch located beneath the hood, near the power cord receptacle. Important: When it is not being us ed, turn the treadmill Off.
Self-Powered Features On self-powered equipment, the batte ry initializes and displays the Precor banner when a user starts exercising. A minimum rate of motion must be maintained for t he banner to appear, as shown in the following table.
Symptoms of a Low Battery If no one has used the equipmen t for an exten ded period of time, the battery may need recharging. Symptoms of a low battery include: y y A flickering or erratic display User and program information is lost once the user stops exercising.
Product Owner's Manual: Self-Powered Featu res 12 The Optional Power Adapter Kit If you purchase the optional pow er adapter, you must also purchase the internal cable kit. Th e kit supplies the cable, bracket, and fasteners that connect t he power adapter to the lower electronics board.
Club Features These next few pages explain how to customize the equipment for your club or facility and view usef ul product information. All these features remain hidde n to the patrons and can only be accessed using special key presses.
Product Owner's Manual: Club Featur es 14 y y y y Club Programming Tips Always start at the Precor banner. Electrical power must be supplied. For self-powered equipment, a constant power source is ava ilable if you us e the optional power adapter, otherwise you will have to maintain the minimum rate of motion.
Table 2. Club custom features and settings Equipment Club Programming Prompt Factory Default Setting Changes you can m ake Treadmill SAFETY CODE Disabled An enabled safety code requires a 4-digit entry code bef ore users can access any exercise programs.
Accessing Club Programming Mode and Changing the Settings Read the Club Programming Tips to identify useful information about customizing your Precor equipment.
Use the following flowchart to navigate through the menu settings on treadmills. SELECT UNITS SET MAX PAUSE TIME SET MAX WORKOUT TIME PAUSE/RESET, 5, 6, 5, 1, 5, 6, 5 SELECT LANGUAGE OK [ ENGLISH ] [ U.
Use the following flowchart to na vigate through the menu settings on ellipticals. SELECT UNITS SET MAX PAUSE TIME SET MAX WORKOUT TIME RESET, 5, 6, 5, 1, 5, 6, 5 SELECT LANGUAGE OK [ ENGLIS H ] [ U.S. ] [ 60 MIN ] [ 120 SEC. ] OK ▼ OK OK ▼ OK OK ▼ ▼ PRECOR SET COOL DOWN TIME [ 5 MIN.
Use the following flowchart to na vigate through the menu settings on climbers. SELECT UNITS SET MAX PAUSE TIME SET MAX WORKOUT TIME RESET, 5, 6, 5, 1, 5, 6, 5 SELECT LANGUAGE OK [ ENGLIS H ] [ U.S. ] [ 60 MIN ] [ 120 SEC. ] OK ▼ OK OK ▼ OK OK ▼ ▼ PRECOR SET COOL DOWN TIME [ 5 MIN.
Choosing a Language The equipment can display user prom pts, text, and user entries in several different languages. When the equipment is shipped from the factory, it is se t to display English. Note: Programming prompts are not affected by language selection.
Setting an Exercise Session Time Limit You can limit how long a user ca n exercise on the equipment. For example, if you set the time limit to 20 minutes, users can only enter a session time between 1 and 20 minutes. Note: The automatic cool-down period is appended to the end of any time-based program, so adjust the time limit accordingly.
Setting a Pause Time Limit You can limit how long a user ca n pause while exercising on the equipment by entering a time between 1 and 120 seconds (two minutes). For example, if you set a pause time limit of 60 seconds, the display automatically resets to the Precor banner if no movement is detected and no key press occurs for one minute.
Treadmill: Determining the Club Speed Limit You can set a maximum speed for t he treadmill. This limits how fast the running belt moves and, co nsequently, the number of speed settings that are available to the user. The speed is displayed in miles per hour (mph) or kilometers per hour (kph) depending upon the units of measure (U.
Treadmill: Accessing Performance Programs Note: This feature is not available on the 946i treadmill. Several performance-based programs on the treadmill can be hidden from the user’s view and, consequently, be unavailable during an exercise session.
Treadmill: Changing Remote Control Access 1. Important: To affect this setting, the treadmill must be connected to a computer and you will need to be familiar with CSAFE commands. When you enable this program, yo u can set a user’s speed and incline through a computer software program which interfaces with the CSAFE port on the treadmill.
EFX: Changing the Auto-Level Setting 1. 2. 3. You can set a specific ramp incli ne so that the EFX automatically returns to it at the end of a wo rkout session. Whatever incline you set, the EFX ramp returns to the setting if a user continues pedaling, once the program sessi on has ended, and presses RESET to return to the Precor banner.
Cycle: Setting a Resistance Range You can set a low, medium or high range of resistance on the recumbent or upright cycles. With in each setting, 25 levels of resistance are available, but the chosen setting affects the overall resistance range. Physical therapy conditioning is an example where you might use this programming feature.
Product Owner's Manual: Club Featur es 28 1. 2. 3. Creating a Custom Program Note: This feature is not available on the 946i treadmill, EFX546i and EFX556i. When you design a custom progra m, you are preprogramming the program profile. At the SET CUSTOM PROGRA M prompt, press OK.
Informational Displays The equipment provides informat ion about its use (odom eter and hour meter), as well as software versions and part numbers, serial number, usage log, and error log. In general, you would only acces s this information if directed to do so by Precor Cu stomer Support.
Table 6. Informational Displays Product Display Description All ODOMETER The odometer value c orrelates to the type of Pr ecor product and the stan dard of units, U.S. or Metric, selected in the club progr ams. Treadmill shows the number of cumulative miles or kilometers l ogged to date.
Error Log Quick access to the informational display is available if error messages have appeared on the di splay and have been recorded in the error log. This feature is usually reserved for service personnel. At the Pr ecor banner, press and hold RESET for 4 seconds.
Product Owner's Manual: Club Featur es 32 User ID Entry with CSAFE Equipment The equipment is fully compatible with CSAFE protocols. When the equipment is connected to a CSAF E master device, the user is prompted to press ENTER and begi n an identification process.
Maintenance It is important to perform the minor maintenance tasks described below. Failure to maintain the equipment as described in this section could void the Pr ecor Limited Warranty.
EFX: Cleaning the Ramp Whenever the ramp becomes soiled, clean the exposed surfaces of the ramp and roller wheels by taking the following steps. Note: If your equipment has a ramp cover, remove it before performing the following steps. Refer to the EFX Assembly Guide.
Treadmill: Checking the Alignment of the Running Belt Proper belt alignment allows t he belt to remain centered and ensures smooth operation. Realigning the belt takes a few simple adjustments. If you are unsure ab out this procedure, call Precor Customer Support.
Treadmill: Adjusting the Running Belt If you are unsure about adjusting the running belt, call Precor Customer Support (refer to Obtaining Service ). CAUTION: For your safety, use the power switch to turn Off the treadmill before making any adjustments.
2. Upright Cycle: Adjusting the Seat Tilt To adjust the seat tilt on an upright cycle, ta ke the following steps. 1. Use a ¹¹⁄₁₆ -inch (17 mm) box-end wr ench or crescent wrench to loosen the nut beneath t he seat as shown in the following figure.
3. Recumbent Cycle: Realigning the Seat If the seat rocks side-to-side, yo u need to realign the center wheel underneath the seat. Adjustment sc rews are located on the left side of the seat rail. To remove seat wobble (side-to-sid e movement), take the following steps.
Moving the Equipment It is important, if you plan to mo ve the equipment, that you obtain adult help and use proper lifting techniques. The equipment is very heavy. Take advantage of the ro ller wheels on the equipment when moving it to a new location.
Product Owner's Manual: Maintena nce 40 Notes:.
Precor Commercial Equipment Limited Warranty PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CAREFULLY BEFORE USING YOUR PRECOR INCORPORATED PRODUCT. BY USING THE EQUIPMENT, YOU ARE CONSENTI NG TO BE BOUND BY THE FOLLOWING WARRANTY TERMS AND CONDITI ONS.
Product Owner's Manual: Precor C ommercial Equipment Limited Warranty 42 This Limited Warranty shall not apply to: 1. Software (PROM) version upgrades. 2. Normal wear and tear, consumables and cosmetic items, including, but not limited to the following: gr ips, seats, and labels.
W e are confident that you will be pleased with y our purchase and that y our new Precor equipment will help satisfy y our customers’ fitness needs, while helping y ou meet y our business goals. T o allo w us to ser ve y ou better , please take a f ew moments to complete and return your warr anty registration.
Which best describes this purc hase (check all that appl y): ❑ First Precor product ❑ Replaces a Precor product of the same type ❑ Replaces same type of product – different br and ❑ Enhancem.
.
POM C -L 48995 -1 0 7 , en W arranty # 3 628 6-112, en Registratio n Card# 45 622-101, en 03 March 2008 Precor , C, CrossRamp, EFX, M, Move Beyo nd, and SmartR ate are registered trademar ks of Precor Incorporated. Crosstrainer , Quic kStart, and StretchT rainer are trademarks of Precor Incorporated.
946i 956i 966i User's Reference Manual Commercial Treadmills.
.
Important Safety Instructions When using Precor equipment, always take basic precautions, including the following: y y y y y y y y y y y y y Read all instructions before using the equipment. These instructions are written for you r safety and to protect the equipment.
User's Reference Manu al: Impor tant Safety Instructions 2 Safety Code The fitness facility you are using ha s the option to enable a safety code. The code involves entering four number keys in sequence. If the correct keys are not pressed within two minutes, further access is denied and the running belt w ill not move.
Table of Contents Important Safety Instructions ............................................ 1 Safety Code..................................................................................... 2 Obtaining Service .......................................
User's Reference Manual: Table of Conte nts 4 Exercise Session .................................................................43 Changing Programs in Mid-ses sion .........................................43 Changing the Workout Time ...........
Treadmill Safety Features The treadmill is equipped with certain items that, when used properly, help sustain an enjoyable workout. These items include: y y y y Safety clip Safety code Handrails Power switch Important: Before exercising, review the Important Safety Instructions found at the beginning of this ma nual.
User's Reference Manual: Treadmill Safety Features 6 To turn the treadmill On and Off, use the power switch located beneath the hood, near the power cord receptacle. Refer to the following figure. Turning the Treadmill On and Off Entering the Safety Code The fitness facility has the option to require a safety code.
Heart Rate Features CAL ORIES W ARMUP F A TBURN CARDIO PEAK HIGH HEART RA TE SmartRate 109 Heart rate and SmartRate ® features are available when you wear the chest strap or grasp both touch-sensitive grips.
20 25 30 35 40 45 50 55 60 65 70 75 70 80 90 100 120 130 140 150 160 170 180 190 200 110 Hea r t Rate T a r get Zo n es Yo ur Hea r t Rate High Peak Ca r dio Fat B urn Wa rmu p Yo ur Age Reco mm e n d.
3. Wearing a Chest Strap During a workout, the heart rate features appear on the di splay when you wear a chest strap. To re ceive an accurate reading, the chest strap needs to be in dir ect contact with your skin. 1. Carefully dampen the back of the strap with tap water Refer to the following figure.
Using the Touch-Sensitive Grips While exercising, you must grasp bo th touch-sensitive grips for a minimum of five to ten seconds to transmit yo ur heart rate to the display.
Table 1. Heart rate target zones and SmartRate LEDs Heart Rate Zone Percent LED Lit LED Blinking Zone Label Below 50 First Orange WARMUP 50 to 54 Second Orange WARMUP 55 to 59 Third Green FAT BURN 60 .
Exercise to Your Target Heart Rate A dedicated window displays your heart rate while you exercise. To view your heart rate (beats per minut e) on the display, either wear a chest strap or grasp both touch-sensitive grips. The Precor web site (www.precor.
User's Reference Manual: Heart Rate Features 13 Troubleshooting Heart Rate The following table may help you understand and troubleshoot erratic heart rate readings. Important: A heart rate can only be detected when the Precor heart rate receiver is properly inst alled in the display.
Display Console OPTIONS BACK OK CALORIES ENTER CLEAR 123 45 6 789 0 PROGRAMS W ARMUP F A TBURN CARDIO PEAK HIGH PAU S E / RESET HEART RA TE SmartRate MANUAL WEIGHT LOSS HEART RA TE PERFORMANCE INTERVA.
CALORIES display: The estimated cumulative number of calories being burned appears. Center display and the PROGRAMS keypad: When you press a PROGRAMS key, the prog ram profile appears in the upper display and the program name appears in the center display.
More Information about the Upper Display CALORIES W ARMUP F A TBURN CARDIO PEAK HIGH HEART RA TE SmartRate 966i INCLINE 0% INCLINE DECLINE The upper display includes the CALORIES, HEART RATE, SmartRate, and a program profile display. The following descriptions explain what appears in the displays.
The range of incline differs on the 966i treadmill. The height remains at 15%, but you can choos e a descending grade up to a minus 3%. Refer to the following figure. -0.5 — - 3 1 — 2.5 4 — 5.5 6 — 7 .5 13 — 15 10 — 12.5 8 — 9.5 0 0.5 — 3 — 3.
More Information about the Center Display CALORIES W ARMUP F A TBURN CARDIO PEAK HIGH HEART RA TE SmartRate 966i INCLINE 0% INCLINE DECLINE The center display pr esents the program name when you select a program.
TIME ELAPSED and TIME REMAINING TIME ELAPSED —displays time in mi nutes and seconds and indicates the amount of time you have been exercising. When you exceed 60 minutes duri ng a single session, the display converts to hours and minutes. Note: The fitness facility can pl ace limits on workout time.
Keypads Use the keypads to enter your exercise session selections and display preferences. Distinct keypads exist on the di splay and are discussed in this section: y y y y Lower Display keypad and th.
INCLINE: Press and hold an INCLINE key to increase or decrease the incline from 0% to 15% (956i or 946i) or from minus 3% to positive 15% (9 66i) in 0.5% increments. Changes to the incline are not immediate. It takes time for the lift to reach the target i ncline shown on the display.
Navigational Keypad OPTIONS BACK OK BACK: When the BACK key is pressed it causes the display to return to the previous menu level. OPTIONS: The OPTIONS key is a multi-functional key. It lets you customize the display and set exercise session goals: time, calories, or distance.
Table 3. Available programs PROGRAMS key Program Menu 946i 956i 966i MANUAL MANUAL 9 9 9 INTERVAL 1 - 1 INTERVAL 9 9 9 1 - 2 INTERVAL 9 9 1 - 3 INTERVAL 9 9 CUSTOM INTE RVAL 9 VARIETY RANDOM 9 9 9 1 C.
User's Reference Manual: Display Console 24 Note: The OK and ENTER keys are usually interchangeable and provide the same functi on when no peripheral devices are attached to the equipment. However, when an swering prompts that originate from a CSAFE device or computer connection, use the ENTER key.
Workout Options CAUTION: Before beginning any fitness program, see your physician for a complete physic al examination. Know your physician-recommended heart rate target zone. 1. 2. 3. 4. 5. 6. Turn the treadmill On. The Precor banner scrolls across the display.
Choosing QUICKSTART QUICK ST ART 1. While the Precor banner scrolls, press QUICKSTART to begin the Manual Program. QUICKSTART applies t he following defaults: Prompts Default Value Program Manual Time Fitness Facility setting Weight 150 lb (68 kg) Age 0 2.
Selecting a Program PROGRAMS PROGRAMS MANU AL WEIGHT L OSS HEART RA TE PERFORMANCE INTERV AL V ARIET Y 1. 2. 3. 4. While the Precor banner scrolls, press one of the PROGRAMS keys, and then press OK. For a description of each program, refer to Programs .
Storing Workout Statistics Many fitness facilities connect Prec or equipment to a computer so you can easily retrieve your work out statistics and determine how well you are meeting your fitness go als. If you are interested in maintaining workout statistic inform ation, ask the manager to create a user account and a user ID for you .
Setting Display Preferences Before Exercising While the Precor banner scrolls, you have the opportunity to set display preferences and program goals. Once you set your preferences, you have a 5-second window to select a program.
Cooling Down After a Workout Incorporate a cool-down period into your workout to help lower your heart rate and minimize mu scle stiffness or soreness. When you complete a program with a time limit or specified goal, you automatically enter a cool-dow n period.
User's Reference Manu al: Workout Options 31 1. 2. 3. 4. Ending a Workout CAUTION: Hold on to a handrail wh en you near the end of your exercise session. The incline automatically recalibrates to a default grade. If the lift is moving, wait until it stops before stepping off the treadmill.
Programs This section describes the progr ams available on the equipment. Use this section as a reference tool to better understand each program’s purpose.
y y The fitness facility can set lim its on workout, pause, and cool-down times and customize ot her aspects of your exercise session. Check with your manager to learn if any limits are in place that might affect your program selections. To pause during a program, press PAUSE/RESET.
Interval Program The Interval Programs, available by pressing the INTERVAL key, are among the best for conditioning your cardiovascular system. Each program raises and lowers your level of exertion repeatedly for the specified period of time. Three programs let you choose the rest and work intervals according to your training regimen.
Random Program The Random Program can be acce ssed by pressing the VARIETY key. Every time the Random pr ogram is selected, a different program profile appears. The colu mns that appear in the program profile show the preprogrammed incline. You can override the preprogrammed incline at any time using the INCLINE keys.
966i/956i Gluteal Programs The two Gluteal Progr ams, availabl e by pressing the VARIETY key, are designed to exercise the gl uteal muscles. The incline is preprogrammed. Review the prof iles to determine the ascent and descent levels of each program.
User's Reference Manual: Programs 37 y y y y y y Heart Rate Program Tips The Heart Rate Programs enhanc e your overall cardiovascular fitness levels to help you achiev e your weight loss and fitness goals. Read through the following tips before selecting a program.
Table 4. Heart Rate Programs Equipment Program Description 966i, 956i, 946i Basic HRC This program enhances y our overall cardiovascular fitness level by keeping y our heart rate within the recommended cardio zone b ased on your age. You must enter your age and hold on to the touch-sensitive grips or we ar a chest strap while exercising.
Weight Loss Programs The Weight Loss Programs begin wi th a warm-up period similar to the heart rate programs, except that the target heart rate is set in the lower fat burn range during the rest intervals. During the work intervals, the target heart rate is initially set to 220 minus age multiplied by 70%.
Track Program The Track Program can be accessed by pressing the PERFORMANCE key. An oval track appears on the display. One lap around the track represents 440 yards (400 meters). A blinking LED moves counterclockwise and indicates your position on the track.
User's Reference Manual: Programs 41 Fitness Tests A variety of fitness tests are av ailable on the equipment, but the fitness facility has the option to remove the program selections from the PERFORMANCE key menu. If you do not see the fitness tests as part of your program sele ctions, ask the facility manager.
Table 5. Fitness Tests Equipment Fitness Test Description 966i, 956i Gerkin Fitness Test This test provides a means of comparing your fitness level with the official fitne ss test of the International Association of Firefighters (IAFF).
Exercise Session This section describes how to access the following attributes through the use of the navigational keypad. Any display selections set during the course of your exer cise session are reset to the fitness facility settings when you en d your session and return to the Precor banner.
Changing the Workout Time To change the duration of your program, take the following steps: 1. 2. 3. 1. 2. 3. 4. Press TIME +/-. A workout time blinks in the disp lay. Use the navigational arrow keys or the number keys to adjust the time. Press OK. A message scrolls across the disp lay indicating that the new workout time has been accepted.
Adjusting Program Goals 5. 6. To designate a distance, calories, or time goal while exercising take the following steps: 1. 2. 3. 4. Press OPTIONS, and then pr ess the down key on the navigational keypad until GOAL appears.
User's Reference Manual: Exercise Sessi on 46 1. 2. 3. 4. 1. 2. 3. 4. Adjusting Your Target Heart Rate Your target heart rate can be ad justed anytime during your exercise session by taking the following steps: Press OPTIONS, and then pr ess the down key on the navigational keypad until TARGET HR appears.
Table 6. Workout statistics using OPTIONS or METRICS key Equipment Menu Description All % COMPLETE Shows how much of the program goal y ou have completed. All TIME IN ZONE Displays the total time that your heart rat e is within the range of 55% to 84% of your target heart rate.
Changing the Units of Measure Display measurements can appear in either Metric or U.S. Standard. To change this setting , perform the following steps: 1. 2. 3. 4. 1. 2. 3. 4. Press OPTIONS, and then pr ess the down key on the navigational keypad until UNITS appears.
946 i/ 9 56 i/ 966 i Co m m er c i al T re ad m i ll s Pro d uc t Specifica tions Product Features 946i 9 56i 966 i Length 7 9 in (204 cm) 88 in (224 cm) 88 in (224 cm) W idth 34 in (8 6 cm) 35 in (89.
9x6i U R M 4 9 004-10 6, en 03 March 2008 Precor, C, CrossRamp, E FX, M, Move Beyond, and S martR ate are registered trademarks of Precor Incorp orated. Crosstr ainer, Crosstrain ing, QuickSt art, and Stre tc hT r ainer are trademarks of Precor Incorporated.
C 95 6i C 966 i Assembly Guide Commercial Treadmills C9 6 6i.
.
C9x6i Commercial Treadmill Assembly Guide 1 Thank you for c hoosing Precor . F or proper inst allation, please read this guide thoroughly and follow the assembly inst ructions. If you do not assemble the treadmill according to these guideli nes, you could void the Precor Limited Wa r r a n t y .
C9x6i Commercial Treadmill Assembly Guide 2 Hardware Kit Fa steners Quantity (A) Soc ket head screw , blac k ( ⁵⁄₁₆ -18 x ¾-inc h) 8 (B) Flat w asher , blac k ( ⁵⁄₁₆ x .68 8) 12 (C) Buttonhead screw , silver ( ⁵⁄₁₆ -18 x ¾-inc h) 6 (D) Flat washer , silver ( ⁵⁄₁₆ x .
C9x6i Commercial Treadmill Assembly Guide 3 Assembly Steps Remove the hood and set it aside. Place the left side upright su pport into the base frame side br acket. Secure the upright support to the side br acket using four socket head screws (A), four wa shers (B), and two loc knuts (F).
C9x6i Commercial Treadmill Assembly Guide 4 Ti e a string to a w asher (D) and feed the w asher through the lower side br acket hole in the right upright support. As the washe r falls to the floor , leav e the upper end of the string hanging out the side br acket hole.
C9x6i Commercial Treadmill Assembly Guide 5 Tighten all mounting screws. 1. St art at the base and alternate ly tighten the eight fasteners that secure the upright supports to the base assembly. 2. W renc h tighten the six screws th at secure the display console to the upright supports.
C9x6i Commercial Treadmill Assembly Guide 6 Level the unit. Before allowing users on the u nit, make sure it is level. Impor tant: If the load is not equally compensated, the user will feel excessive vibration or mo vement at the display console. Adju st one rear foot at a time .
C9x6i Commercial Treadmill Assembly Guide 7 Chec king the Alignment and A djusting the Running Belt Proper belt alignment allows the belt to re main centered and ens ures smooth ope ration. Realigning the belt takes a few simple a djustments. If you are unsure about this procedure, contact Precor Customer Support.
C9x6i Commercial Treadmill Assembly Guide 8 Notes:.
.
©200 7 Precor Incorporated www .precor .com C9x6i A G 48 9 71-105 , en 05 February 200 7 Precor Incorporated 20031 142nd Avenue NE P. O . B o x 7 2 0 2 W oodinville, W A USA 98 0 7 2-4002.
C 9x6i C 95 4i This adde ndum accompanies your C9x6i, and C95 4i Assembly Guides . Additional split w ashers have been adde d which affect the hardware kit and assembly steps. A new split w asher (shown below) has been added to the hardw are kit, and is u sed in steps 2, 3, and 7 .
C954i/C956i/C966i Treadmill Assembly Guide Addendum 2 Replace step 7 of the Assembly Guide with the following: Lower the display co nsole, align, and s ecure it to the upr ight supports using six buttonhead screws (C), six split washers (H), and six w ashers (D).
An important point after buying a device Precor EFX556i (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Precor EFX556i yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Precor EFX556i - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Precor EFX556i you will learn all the available features of the product, as well as information on its operation. The information that you get Precor EFX556i will certainly help you make a decision on the purchase.
If you already are a holder of Precor EFX556i, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Precor EFX556i.
However, one of the most important roles played by the user manual is to help in solving problems with Precor EFX556i. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Precor EFX556i along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
