Instruction/ maintenance manual of the product CW-113 Precor
Go to page of 16
Assembly Guide CW-113.
.
CW -113 Assembly and Maintenance Guide page 3 IMPOR T ANT SAFETY INSTRUCTIONS Impor tant Safety Instructions Impor tant Safety Instructions When using e x ercise equipment, basic precautions should alwa ys be taken, including the f ollowing: • Read all instructions before assemb ling the CW -113.
CW -113 Assembly and Maintenance Guide page 4 T able of Contents 1 2 Impor tant Safety Instructions .................................................................................................. .3 Obtaining Ser vice ..............................
CW -113 Assembly and Maintenance Guide page 5 1 Pr eparations Preparations The CW -113 par ts are inspected bef ore shipment. Each unit contains se ver al pieces that require assembly . Y ou will need to obtain adult assistance during the assembly process.
CW -113 Assembly and Maintenance Guide page 6 ½ x 5¼-inch Buttonhead screw (E) 1 Fastener Qty Hardwar e Kit ³⁄₈ x ¾-inch Buttonhead screw (A) 12 ½-inch W asher (F) 2 ³⁄₈ -inch W asher (D.
CW -113 Assembly and Maintenance Guide page 7 2 Assembly Instructions Assembly Instructions Assembly of the CW -113 takes about 50 minutes to complete. If this is the first time you ha ve assemb led this type of equipment, plan on allowing more time. Be careful to open box es and assemble components in the sequence presented in thie manual.
CW -113 Assembly and Maintenance Guide page 8 Assemble the Unit Assemble the Unit 1. Attach the Main F rame to the Stabiliz er using f our ¾-inch buttonhead scre ws (A) f our ³⁄₈ -inch split washers (B) Wrench tighten. Note: Make sure the wheels on the Stabiliz er are positioned as shown in the illustration.
CW -113 Assembly and Maintenance Guide page 9 Assemble the Unit, continued 5. Pull on the Adjustment Pin and slide the Back Adjustment through the Main F rame . Release the Adjustment Pin while it is aligned with the Back Adjustment middle hole. Note: Make sure the Springs slide onto the posts on the bottom of the Back Support 6.
CW -113 Assembly and Maintenance Guide page 10 Assemble the Unit, continued Roller Bar 8. Slide the Roller Bar through Holder Assembly , and then place a Round Cap onto each end of the Roller Bar . Slide the Round Caps against the Holder Assembly . 9.
CW -113 Assembly and Maintenance Guide page 11 Assemble the Pads Assemble the Pads 1. Attach the Back P ad to the Back Suppor t using f our 3-inch buttonhead scre ws (H) f our 5 ⁄ 16 -inch split washer (J) f our 5 ⁄ 16 -inch washers (K) Wrench tighten.
CW -113 Assembly and Maintenance Guide page 12 Clean the Pads and Assembly Clean the Pads and Assembly T o clean the pads moisten a clean, soft cloth in a mild solution of soap and water and wipe the pads thoroughly . Dr y the pads with a clean, dr y cloth.
page 13 Limited W arranty Precor , Incor porated (PRECOR) will repair or replace any of the f ollo wing components which are def ective as to materials or workmanship for products man ufactured and so.
CW -113 Assembly and Maintenance Guide page 14 Notes:.
.
Precor is a registered trademark of Precor Incor porated. Specifications subject to change without notice. Cop yright 2007 Precor Incor porated. www .precor .
An important point after buying a device Precor CW-113 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Precor CW-113 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Precor CW-113 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Precor CW-113 you will learn all the available features of the product, as well as information on its operation. The information that you get Precor CW-113 will certainly help you make a decision on the purchase.
If you already are a holder of Precor CW-113, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Precor CW-113.
However, one of the most important roles played by the user manual is to help in solving problems with Precor CW-113. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Precor CW-113 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
