Instruction/ maintenance manual of the product 903 Precor
Go to page of 24
page 1 R USA Owner’ s Manual Assembly and Operation Electronic Console.
page 2 Safety Information Please review and observe the following safety guidelines when assembling and using the Precor 903/904 electronic console: Before beginning any fitness program, you should see your physician for a thorough physical examination.
page 3 T able of Contents Safety Information ........................................................ 2 Obtaining Service ........................................................ 2 Before Y ou Begin ....................................................
page 4 Before Y ou Begin Thank you for purchasing the easy-to-use electronic console option for your Precor 903 Manual or 904 Total Body Treadmill. Before assembling the console onto your treadmill, take the time to read through this manual so that you are familiar with the contents of the package and the features on the electronic console.
page 5 Installing the Electronic Console The handrail clamp can be used on either the 903 or 904 treadmill. However, the steps used to install the console onto the clamp are slightly different depending on which treadmill you have. Please refer to the steps that apply to your treadmill.
page 6 3. Unlock and remove the mounting bracket from the back of the electronic console. Unlock the mounting bracket by pushing it down toward the base of the console. See Diagram 2. Diagram 2 Diagram 3 4. Position the mounting bracket onto the handrail clamp so that the smooth side of the plate is facing you.
page 7 5. Secure the mounting bracket and clamp by inserting the two long screws through the mounting holes. You may need to squeeze the ends of the clamp together to install the screws. See Diagram 3. Tighten the screws into the recessed holes on the mounting plate using the Phillips head screwdriver.
page 8 Diagram 5 9. Attach the C clips around the handrail as shown in Diagram 5. Position the slight protrusion on the C clip around the reed switch wire and micro-adjustment knob cable. Squeeze the C clips together to close them and secure the wires in place.
page 9 904 Assembly Procedures To install the 904 electronic console, take the following steps: 1. Remove the handrail clamp from its box. Take the long and short screws out of the handrail clamp using your fingers or a Phillips head screwdriver. Set the screws aside.
page 10 3. Insert the long screws through the mounting holes on the clamp. See Diagram 7. You may need to squeeze the ends of the clamp closer together to install the screws. Tighten the screws using a Phillips head screwdriver until the clamp remains securely in place.
page 11 7. Position the electronic console over the handrail clamp and plug the connector into the receptacle. See Diagram 8. Do not force the connection. The connec- tor is designed to engage in one direction only. A tab on the connector and a slot on the receptacle help you determine the proper alignment.
page 12 Installing the Mounting Pads Two adhesive-backed foam pads (one thick and one thin pad) accompany your electronics option package. The thick pad is used as a spacer and you place the reed switch on it. The thin pad is positioned onto the flywheel and becomes the base for the magnet.
page 13 2. Remove the paper backing from one side of the thick pad and press the pad firmly in place between the roller guard and the deck of the treadmill. See Diagram 10. 3. Make a copy of the template shown in Diagram A. See Appendix A. Cut along the dotted lines.
page 14 5. Remove the paper backing from one side of the thin pad and press the pad firmly in place onto the flywheel. See Diagram 11. 6. To mount the magnet and reed switch continue with the steps below, Attaching the Magnet and Reed Switch.
page 15 1. Remove the paper from the adhesive strip on the flywheel’s foam mounting pad. 2. Wipe the back of the magnet with a dry clean, soft cloth. Position it over the foam mounting pad on the flywheel and press it onto the adhesive strip. Check that it is securely mounted.
page 16 Diagram 13 5. Remove the paper to expose the adhesive strip that is on the foam mounting pad. Press the reed switch onto the pad. Be sure that the reed switch is positioned so that the wires are easily routed up the handrail. See Diagram 13. 6.
page 17 Using the Electronic Console The electronic console provides multiple features and an easy-to-read LCD display that lets you review your progress as you work out. The three buttons on the console let you control what information you want to display.
page 18 To hold on one particular feature, press the SELECT button while the feature (such as TIME) is being displayed. The icon stops blinking. To return to SCAN mode, press the SELECT button one more time. The electronic console automatically shuts off when the treadmill is not in use after approximately 4 minutes.
page 19 Setting the Timer The timer lets you set the duration of your workout. When the selected amount of time is up, an alarm beeps for about 10 seconds. To set the timer, take the following steps: 1. When TIME is displayed, press the SELECT button.
page 20 Maintaining the Electronic Console Use a damp, clean cloth after every workout to wipe off any perspiration that might have fallen on the electronic console. Periodically, clean the electronic console using a cloth dampened with a mild dishwashing detergent solution.
page 21 Diagram 15 Diagram 16 2. Disconnect the reed switch wire by gently pulling the connector out of the receptacle. See Diagram 15. 3. Remove the back of the electronic console by unscrewing the four Phillips head screws. See Diagram 16. Set the screws aside.
page 22 Diagram 17 5. Reinsert two fresh batteries. Remove the existing batteries from the unit and reinsert two fresh (A-76 type) alkaline batteries. The positive (+) side should be facing you. See Diagram 17. Note : All the LCD segments momentarily appear when the fresh batteries are installed.
page 23 Appendix A Put magnet mounting pad here Shaft cut-away Make a copy of this template or trace the pattern onto a different sheet of paper before cutting along the dotted lines.
page 24 USA R Precor Incorporated P .O. Box 3004 Bothell, WA USA 98041-3004 Precor is a registered trademark of Precor Incorporated. © 1996 Precor Incorporated. Protected by one or more of the following US and foreign patents: US 5, 007, 630; US D303,414; US D313,826; TW 21,389.
An important point after buying a device Precor 903 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Precor 903 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Precor 903 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Precor 903 you will learn all the available features of the product, as well as information on its operation. The information that you get Precor 903 will certainly help you make a decision on the purchase.
If you already are a holder of Precor 903, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Precor 903.
However, one of the most important roles played by the user manual is to help in solving problems with Precor 903. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Precor 903 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
