Instruction/ maintenance manual of the product I-Stick 2.0 PQI
Go to page of 5
® 2.0 Introduction The Intelligent Stick ® 2.0 is PQI’s newest USB flash drive . It’s small, slim and fast, geared to be the new generation’s small form factor flash card. Although the Intelligent Stick ® 2.0 is fully compat ible with USB hos t devices that have an A-type USB port.
Sustained data read speed up to 8 MB/sec* Supports suspend and resume modes No external pow er needed Single +5V DC Supply Low pow er cons umption LED indicator for file ac.
LED Indicator Blink: Read/ Write DC voltage +5.0 volt Dimensions Head: 12.00 x 12.30 x 2.07 mm Body: 31.00 x 18.00 x 2.80 mm Weight 2.8g Storage Temperature -25 ~ 75 Operating Temperature 0 ~ .
TEL: +1-510-6517281 FAX: +1-510-6517240 www.pqimemory .com THE NETHERLANDS PQI EUROPE B.V. Helftheuvelweg 11, 5222 AV Den Bosch, The Netherlands TEL: +31-73-6273555 FAX: +31-73-6234033 www.
No.2070 Shennan Zhong Road, Shenzhen, China, 518031 TEL: +86-755-83287509 FAX: +86-755-83287582 www.pqi.com.cn CHINA(Hong Kong) POWER QUOTIE NT INTERNATIONAL (H.K.) CO., LTD. Flat F. 4/F, Yeung Yiu Chung (No. 8) Industrial Build ing, 20 Wang Hoi Road, Kowloon Bay, Kowloon, Hong Kong TEL: +852-27074118 FAX: +852-27074308 www.
An important point after buying a device PQI I-Stick 2.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PQI I-Stick 2.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PQI I-Stick 2.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PQI I-Stick 2.0 you will learn all the available features of the product, as well as information on its operation. The information that you get PQI I-Stick 2.0 will certainly help you make a decision on the purchase.
If you already are a holder of PQI I-Stick 2.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PQI I-Stick 2.0.
However, one of the most important roles played by the user manual is to help in solving problems with PQI I-Stick 2.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PQI I-Stick 2.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
