Instruction/ maintenance manual of the product POWX0782 PowerPlus
Go to page of 22
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 1 www .varo.com 1 APPLIC A TION ................................................................................. 4 2 DESCRIPTION ...........................................................................
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 2 www .varo.com 10.1.6 Bevelling (Fig. 10 and Fig. 11) ................................................................................ 13 10.1.7 Sawing the w orkpiece: ....................................
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 3 www .varo.com 14 W ARRANTY .................................................................................. 22 15 ENVIRONM ENT ..........................................................................
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 4 www .varo.com CROSS-CUT AND MITRE SAW WITH TOP TABLE POWX0782 1 APPLIC A T ION The machine is designed for saw ing wood, metal and plastic.
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 5 www .varo.com 4 SYMBO LS In this manual and / or on the machine the follow ing symbols are used: Denotes risk of personal injury or da mage to the tool .
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 6 www .varo.com Avoid accidental start s. Ensure the switch is in the off position befor e inserting the plug. Carrying power tools with you r finger on the switch or plug ging in po wer tools when the switch is in the on position makes acciden ts more like ly.
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 7 www .varo.com Only use saw blad es that are reco mm ended by the manufac turer and that ful fil the EN847- 1 standard. Also make sure the riving knife is not thi cker than the width of the saw cut, and that it is not thinner than the bo dy of the saw blade.
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 8 www .varo.com Do not carry out any free-hand ope rations. Free-hand means that yo u us e your hand s for supporting the w orkpiece, or for leading it w ith your hand s , instead o f using the rip fence or the mitre blo ck.
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 9 www .varo.com 9 INSTALL A T ION AND TR ANSPORT Do not carry the machine on the handgrip; the handgrip is not designed to car ry the full weight of the mac hine. For carry ing the machine, hold it on both edges of t he base (12).
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 10 www .varo.com 9.2.2 Cross- cu t and mitre saw operating mode (Fig. 6) Make sure that the mitre and w idth guide (4) i s correctly installed and that the saw blade i s covered. This ac tivates sw itch A (8).
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 11 www .varo.com Follow the user instru ctions for the dust collector . 9.2.7 Connection to AC powe r High-voltage! Only operate this ma c hine in dry surround ings.
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 12 www .varo.com Before starting w ith the installa tion of the machine: - Switch the mach ine “OFF” - Remove the p lug from the s ocket - Wait until .
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 13 www .varo.com The saw should be switched off by releasing the switch (20), if no furth er sawing ha s to be done. 10.1.5 Mitre sawing (Fig. 7) During mitre saw ing, the w orkpiece is saw ed at an angle in relation to the mitre and width guide.
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 14 www .varo.com 10.1.8 Double mitre cu t A double mitre cut is a combination of a mitre cut and a bevelling cut; th is means that the workpiece is cu t at an angle in the one single move ment, which is no t equal to 90° in relation to the mi tre and w idth guide and the material sur face.
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 15 www .varo.com Replace the push block when da maged. 10.2.5 Installation HAZA RD! Before starting w it h the installa tion of the machine: - Switch .
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 16 www .varo.com 10.2.6 Sawing HAZA RD! Always use a push block, if the distance D of the workpiece is less than 120 mm (Fig.
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 17 www .varo.com Check the powe r cable and plug f or damages, and let da maged part s be replaced by a certified electri cian. Check all moving par ts, and ma ke sure that the y can move freely and smoo thly over their entire operational ra nge.
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 18 www .varo.com Remove the shaft bolt (E1) and th e outer saw flange (E2) fro m the saw shaft. Remove the saw blade (18) fro m the saw shaf t and lift it up to remove it fro m the machine. Remove the shaft nu t (E4) and th e inner saw flange (E3) fro m t he saw s haft.
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 19 www .varo.com The spanner must be re moved, after the shaft that ha s been tightene d. Install the saw table and mount th e c orresponding screw s.
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 20 www .varo.com 11.3 Modifications 11.3.1 Modifications on the mitre and width guide (Fig . 27) Loosen the attach ment screws (L1 ) of the guide. Adapt the guide so tha t it is po sitioned ex actly at right angles to the saw blade, whe n the mitre table (11) i s in the 0° po sition.
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 21 www .varo.com 12 TECHNIC AL DAT A Mains voltage 220 - 240 V ~ 50Hz Power 1800 W Saw blade rp m 5000 min -1 Saw blade di m ensions 254 x 30 x 3 mm - 60T.
POWX0782 EN Copyrigh t © 2015 VARO P a g e | 22 www .varo.com 14 W ARRANTY This product is w arranted for a 36- month period e ffective fro m the date of pu rchase by the first user.
An important point after buying a device PowerPlus POWX0782 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PowerPlus POWX0782 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PowerPlus POWX0782 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PowerPlus POWX0782 you will learn all the available features of the product, as well as information on its operation. The information that you get PowerPlus POWX0782 will certainly help you make a decision on the purchase.
If you already are a holder of PowerPlus POWX0782, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PowerPlus POWX0782.
However, one of the most important roles played by the user manual is to help in solving problems with PowerPlus POWX0782. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PowerPlus POWX0782 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
