Instruction/ maintenance manual of the product TI052A-3W Aube Technologies
Go to page of 2
PROGRAMMABLE W ALL SWITCH MODEL TI052A-3W / 3-W A Y FOR ALL LIGHTING THE MAXIMUM LOAD MUST NO T EXCEED 500W/230V SINGLE POLE INST ALLA TION When installing, do not connect the red w all switch wire. Make sure the red wire is correctly capped with a wire nut.
SETTING TIME AND DA Y Before programming, set the clock to the correct time. 1. Y ou can change the time format at anytime back and for th from 24 to 12 hour . T o do so, maintain MIN ke y pressed down as HEURE ke y is pressed and released. Then, release MIN key .
An important point after buying a device Aube Technologies TI052A-3W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aube Technologies TI052A-3W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aube Technologies TI052A-3W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aube Technologies TI052A-3W you will learn all the available features of the product, as well as information on its operation. The information that you get Aube Technologies TI052A-3W will certainly help you make a decision on the purchase.
If you already are a holder of Aube Technologies TI052A-3W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aube Technologies TI052A-3W.
However, one of the most important roles played by the user manual is to help in solving problems with Aube Technologies TI052A-3W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aube Technologies TI052A-3W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
