Instruction/ maintenance manual of the product PD-3012 PowerDsine
Go to page of 16
Power over LAN ™ Midspan PD - 3006 / PD - 3012 6 - Port & 12 - Port Models IEEE 802 .3 af - compliant User Guide Data and Power on a Single Line.
Disclaimer PowerDsine assumes no responsibility or liability arising from the use of Midspans, as described herein, nor does it convey any license under its patent rights or the rights of others. Applications that are described herein for any of theses products are for illustrative purposes only.
PD - 3006/12 Power over LAN Solutions 3 Cat. No.: 06 - 6831 - 056 Contents 1 SAFETY INFORMAT ION 5 1.1 General Guidelines 5 1.2 Power Cord 6 2 ABOUT THE POWER OVER LAN MIDSPAN 7 2.1 Power Management (PD - 3012 only) 7 2.2 10/100BASE - TX Ports Definition 8 2.
PD - 3006/12 Power over LAN Solutions 4 Cat. No.: 06 - 6831 - 056 Before proceeding, record the unit’s serial number below for future reference. The serial number can be found on the information label at the rear of the Power over LAN Midspan.
PD - 3006/12 Power over LAN Solutions 5 Cat. No.: 06 - 6831 - 056 1 Safety Information 1.1 Gene ral Guidelines You must read the following safety information before carrying out any installation, removal or any maintenance procedure on the Power over LAN Midspan.
PD - 3006/12 Power over LAN Solutions 6 Cat. No.: 06 - 6831 - 056 1.2 Power Cord In the event that the power cord is replaced, the replacement must meet local requirements. U.S.A. and Canada * The cord must be UL - approved or CSA certified. * The minimum specification for the flexible cord is: - No.
PD - 3006/12 Power over LAN Solutions 7 Cat. No.: 06 - 6831 - 056 2 About the Power over LAN Midspan PowerDsine’s family of Power over LAN Midspans, series 3000, injects power over data - carrying Ethernet cabling.
PD - 3006/12 Power over LAN Solutions 8 Cat. No.: 06 - 6831 - 056 2.2 10/100BASE - TX Ports Definition 2.2.1 Data Input Ports The Midspan has 6 (or 12) 10Base - T/100Base - TX - data input ports, configured in a non - crossover manner (straight - wired).
PD - 3006/12 Power over LAN Solutions 9 Cat. No.: 06 - 6831 - 056 2.3.2 Port Indications The status of each port is monitored by a bi - color LED indicator (green and orange). Green indicates that the PD has been identified as "Power over LAN enabled", is active and is receiving power.
PD - 3006/12 Power over LAN Solutions 10 Cat. No.: 06 - 6831 - 056 Table 2 - 2 : Port Status Indications Port Indicator State Port Load Conditions Port Voltage Orange A not power - ready device is connected to the port. Overload conditions; or short; or forced external voltage feed (constant DC ) into the port.
PD - 3006/12 Power over LAN Solutions 11 Cat. No.: 06 - 6831 - 056 3 Installing the Power over LAN Midspan 3.1 Background Information As shown in Figure 3 - 1 , the Midspan is connected in series to an Ethernet switch/Hub. The data outputs from the switch are connected to the Midspan.
PD - 3006/12 Power over LAN Solutions 12 Cat. No.: 06 - 6831 - 056 3.3 Powering up The Power over LAN Midspan has no on/off switch. To apply or remove power to the Midspan, insert or remove the power cable from the receptacle on the rear panel of the unit.
PD - 3006/12 Power over LAN Solutions 13 Cat. No.: 06 - 6831 - 056 Figure 3 - 2 : Installing Brackets on Midspan Figure 3 - 3 : Rack Mounting the Midspan.
PD - 3006/12 Power over LAN Solutions 14 Cat. No.: 06 - 6831 - 056 3.5 Troubleshooting 3.5.1 Preliminary Steps If you encounter problems, check that: * Power is applied to the Midspan * A crossover - .
PD - 3006/12 Power over LAN Solutions 15 Cat. No.: 06 - 6831 - 056 Table 3 - 1 : Troubleshooting Steps Symptom Corrective Steps The e nd device operates, but there is no data link. 1. Verify that the port indicator on the front panel is continuously lit.
Cat. No.: 06 - 6831 - 056 Release 1.0 Visit our web site at: ww w.powerdsine.com For technical support, call: +972 - 9 - 7755123 In the USA: +631 - 756 - 4680 or 1 - 877 - 4 - 802 - 3AF.
An important point after buying a device PowerDsine PD-3012 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PowerDsine PD-3012 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PowerDsine PD-3012 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PowerDsine PD-3012 you will learn all the available features of the product, as well as information on its operation. The information that you get PowerDsine PD-3012 will certainly help you make a decision on the purchase.
If you already are a holder of PowerDsine PD-3012, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PowerDsine PD-3012.
However, one of the most important roles played by the user manual is to help in solving problems with PowerDsine PD-3012. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PowerDsine PD-3012 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
