Instruction/ maintenance manual of the product 2000 Power Drive
Go to page of 12
powerdriveinverters.com 200 0 2000 W att DC to AC Power Inverter Owner ’s Guide Please Save for Future Reference.
Thank you for purchasing the POWERDRIVE2000 power inverter , a high performance solution to using household power while on the road. Please read and understand all of the information provided in this manual before operating or installing.
CAUTION : DO NOT connect the RPPD2000 to live AC power circuits. Damage to the inverter will result even if the power switch is in the OFF position. DO NOT connect any AC device which has its neutral conductor connected to ground. DO NOT expose the RPPD2000 to air temperatures in excess of 104°F .
INST ALLATION : Selecting a suitable location The RPPD2000 must be installed in an area that meets the following requirements in order to operate safely and provide optimum performance: 1. DRY : DO NOT expose the unit to moisture. 2. COOL: Ambient air temperature should be between 32°F and 104°F .
Connect the Power Cables to the Inverter: Connect cable to the Power Input T erminals on input end of the inverter . The red terminal is positive (+) and the black terminal is negative (-).
CAUTION: Never disconnect the DC cables from the inverter without first disconnecting the cables from the battery or potentially lethal electricity will be left exposed. NOTE: The Power Button turns the control circuit in the inverter on and off . It does not disconnect power from the inverter .
Low V oltage Protection : If the DC input voltage drops below the alarm threshold of 10.5V the meter will flash (LUP) to indicate Low V oltage Protection, but the unit will continue to operate.
NOTE: The wattage rating applies to resistive loads. The inverter will operate most AC loads within its power rating. Some induction motors used in freezers, pumps, and other motor-operated equipment require very high surge currents to start.
T T o o c c a a l l c c u u l l a a t t e e t t h h e e t t o o t t a a l l w w a a t t t t - - h h o o u u r r s s o o f f e e n n e e r r g g y y c c o o n n s s u u m m p p t t i i o o n n : : Multiply the power by the operating time. T o determine how many 12-volt amp hours will be consumed, divide the watt hours by 10.
Problem/SymptomPossible Causes Solution Low output voltage Overloaded Reduce the load. No output voltage Low input Recharge battery . Red LED illuminated V oltage Check connections and cable. Alarm sounding Continuous operation input current required.
This Limited One Y ear Warranty from POWERDRIVE, a DAS brand, applies to all electronic products and devices manufactured by DAS Distributors and sold under the brand name POWERDRIVE.
1875 Zeager Road, Elizabethtown, P A 17022 © POWERDRIVE.
An important point after buying a device Power Drive 2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Power Drive 2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Power Drive 2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Power Drive 2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Power Drive 2000 will certainly help you make a decision on the purchase.
If you already are a holder of Power Drive 2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Power Drive 2000.
However, one of the most important roles played by the user manual is to help in solving problems with Power Drive 2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Power Drive 2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
