Instruction/ maintenance manual of the product TH146-P-DE Aube Technologies
Go to page of 9
TH146-P-DE 400-280-004-C 1 1/29/06 1/9 TH146-P -DE Installation Guide Programmable Heat Pump Controller - The TH146-P-DE programmable controller can be used to control a heat pump system.
TH146-P-DE 400-280-004-C 1 1/29/06 2/9 • Controller terminal L to heat pump terminal L • Controller terminal W to heat pump terminal W (see section 2.5) • Controller terminal G to heat pump terminal G (see section 2.5) Y ou might need a 24 V transformer if you have an add-on installa- tion.
TH146-P-DE 400-280-004-C 1 1/29/06 3/9 NOTE : In this mode, the short-cycle protection is disabled and the interstage delay is reduced to 1 minute. USER: User mode. Gives access to configuration parameters 1 to 4 only . n Place the controller in Installer mode ( INST) using the SW2 selector switch on t he back of the console.
TH146-P-DE 400-280-004-C 1 1/29/06 4/9 Configuration Menu Item Parameters Display Options Default Desc ription 1 T ime format 12 Hr / 24 Hr 24 Hr Select the time display format. 2 Early S tart On / OF OF On: Heating or cooling starts in advance (as determined by the controller) so that the desired tem perature is attained at the set times.
TH146-P-DE 400-280-004-C 1 1/29/06 5/9 Connection Diagram — New Installation TH146-P AC144-03 AC146-410 CT241 Humidifier Heat Pump Compressor Fault CT280-HP-2H1C Fan Auxiliary Heat Defrost Va l v e .
TH146-P-DE 400-280-004-C 1 1/29/06 6/9 Connection Diagram — Add-on Installation TH146-P 24 V T ransformer Dual Energy AC144-03 AC146-410 CT241 RC845 Humidifier Auxiliary Heating System Heat Pump Com.
TH146-P -DE User ’s Guide Programmable Heat Pump Controller TH146-P-DE 400-280-004-C 1 1/29/06 7/9 n Press Clk . The hour display flashes. o Set the hour using . p Press Clk . The minute display flashes. q Set the minutes using . r Press Clk . The day display flashes.
TH146-P-DE 400-280-004-C 1 1/29/06 8/9 6.3.1 Manual Adjus tment Use this adjustment mode to set t he temperature manually . T o place the controller in this mode, press Auto/Man so that disappears from the screen and set the tem perature using the buttons.
TH146-P-DE 400-280-004-C 1 1/29/06 9/9 Manual Adjustment In manual adjustment, the humidity le vel is set by the user (5% to 60%). n Press the Hum button until MAN appears on the screen. o Press one of the buttons to adjust the humidity level. p Press the button to return to normal display .
An important point after buying a device Aube Technologies TH146-P-DE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aube Technologies TH146-P-DE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aube Technologies TH146-P-DE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aube Technologies TH146-P-DE you will learn all the available features of the product, as well as information on its operation. The information that you get Aube Technologies TH146-P-DE will certainly help you make a decision on the purchase.
If you already are a holder of Aube Technologies TH146-P-DE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aube Technologies TH146-P-DE.
However, one of the most important roles played by the user manual is to help in solving problems with Aube Technologies TH146-P-DE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aube Technologies TH146-P-DE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
