Instruction/ maintenance manual of the product PDR-654/PDR-654T Power Acoustik
Go to page of 17
PDR-654/PDR-654T 6.5” Monitor MP3/MP4 Player AM/FM Radio Built-in TV tuner (only for PDR-654T model) Owner’s Manual T ake the time to read through this owner ’ s manual. Familiarity with inst allation and operation procedures wi ll help y ou obtain the best Performance from your new device.
2 Import ant Safeguards z Using the device at temperature below -10 ℃ may cause the breakage of the device. BEFORE USING PLEASE HEA T UP THE P ASSENGER COMP ARTMENT TO THE RECOMMENDED TEMPERA TURE! z Read carefully through this manual to familia rize you with this hi gh-quality sound system.
3 Content s Important Safeguar ds........................................................................................................... ........ 2 Content s..........................................................................................
4 Accessories Package contains the following accessories for inst allation and operation of the unit. (1) W asher , S pring W asher , M5 Nut 1 each (2) Mounting S trap 1 (3) Bolt 5*20 1 (4) Screw 5*6 .
5 Inst allation/Un-inst allation Note Before starting inst allation of the unit, make sure the wir ing is connected properly . Use only the part s provided with the unit to ensure proper installation. The use of unauthorized part s may cause malfunction.
6 Wiring Connections NOTE: Never connect cable to the system while it is connected to the battery power . Whenever the unit is disconnected from the battery , the pr eset memory will be erased and the unit will go back to its factory default s. Note: T o watch video the parking wire should be connected to break signal.
7 Note: - Only use groundless loudspeakers. - Use only loudspeakers of minimal 40W att, using fewer watts may result in damaging your loudspeakers at higher volumes. - Use 4~8 Ω (Ohm impedance) loudspeakers only; using higher or lesser impedance may damage the unit.
8 Panel Control 1. POWER/MUTE Button Press it to turn on the unit. When turned on, press it to mute the volume output, press and hold for 2 seconds to turn the unit of f when the unit is on.
9 Remote control Remove Battery Note: The distance may vary according to the brightness of ambient light. If the remote is not used for an extended peri od of time, remove the battery to prevent possible damage from battery leakage and corrosion.
10 Main Menu The best way to discover the progra m is to explore each screen in detail, and to find out how to move from one to another . Read th is chapter for a guided tour . Unit start s by display ing the Main menu. This is the root of t he screen hierarchy , and you can simply access all features by tapping on the touch screen buttons.
11 ◆ USB/SD/MMC Interface / T o start USB /SD /MMC, t ap the corre sponding icon on main menu screen, or press the MODE button on the front panel or RC repeatedly .
12 ◆ TV Model (only for PDR-654T) T o start TV mode, tap on TV button from main menu screen. Connect a TV antenna to the TV ant enna jack of the unit. Select TV mode; press on the center of the touch screen, and following interface will be display: 1.
13 z System Select this menu item is to set TV system: SECAM => NTSC =>P AL, press NTER button on the remote or tap the screen to select. z Audio Select this menu item is to set the TV sound system: When system setting P AL, press ENTER on remote or tap the screen button to select TV sound system: D/K=>M/N=> B/G=> I.
14 LONDNESS: Selecting loudness ON will emphasize the low frequency output. BEEP: Keypad sound setting. Display Bright: set the LCD sc reen brightness up or down Contrast: set contrast up or down Saturation: set saturation up or down General Clock hour: select 12-hour or 24-hour clock display mode.
15 CALIBRA TION procedure of the touch screen is described as below: When the target moves to another position, tap and hold at the center of the new target. Repeat each time to complete the calibration process. When the calibration has been completed, the device switc hes back to the previous operating mode and retain the previous setting.
16 T roubleshooting guide Symptom Cause Solution General No power The car ignition is not on. The fuse is blown. If the power supply is properly connected to the car accessory switch the ignition key to “ACC”. Replace the fuse. No sound V olume is in minimum.
17 S pecification General Power supply: 12 V DC Current consumption: Max. 10 A Maximum power output: 35W x 4 channels (Max.) Compatible format s: MP3/MP4/WMA/ JPEG/RMVB Dimensions (W x D x H) / weight: 178 x 165 x 100 mm / 1.6 kg Working temperature range: -10 ℃ - +60 ℃ TFT display Screen size: 6.
An important point after buying a device Power Acoustik PDR-654/PDR-654T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Power Acoustik PDR-654/PDR-654T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Power Acoustik PDR-654/PDR-654T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Power Acoustik PDR-654/PDR-654T you will learn all the available features of the product, as well as information on its operation. The information that you get Power Acoustik PDR-654/PDR-654T will certainly help you make a decision on the purchase.
If you already are a holder of Power Acoustik PDR-654/PDR-654T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Power Acoustik PDR-654/PDR-654T.
However, one of the most important roles played by the user manual is to help in solving problems with Power Acoustik PDR-654/PDR-654T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Power Acoustik PDR-654/PDR-654T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
