Instruction/ maintenance manual of the product OV2-420/OV2-600/OV2-800/OV2-1250/OV2-1800 OV2-2200/OV2-2600/OV4-840/OV4-1200/OV4-1600 Power Acoustik
Go to page of 8
OV2-420/OV2-600/OV2-800/OV2-1250/OV2-1800 OV2-2200/OV2-2600/OV4-840/OV4-1200/OV4-1600 Owner s Manual , INTRODUCTION Amplifiers provide high-performance sound reinforcement for your mobile audio equipment.
T ABLE OF CONTENTS PLANNING YOUR SYSTEM................................................ 4 MOUNTING YOUR AMPLIFIER ........................................... 4 WIRING CONNECTION.................................................... 5-7 POWER INDICA TOR LED .
B.V ARIABLE LOW-P ASS FIL TER(40Hz-250Hz) For use as a dedicated subwoofer channel,set filter switch to LPF .Adjust variable crossover frequency with control as desired.The amplifier input circuit filters out everything above 40....250Hz(depends on the adjustment of the frequency control), so only the deepest bass notes are amplified.
F .CONNECTING LOW LEVEL INPUTS (RCA Jacks) NOTE: DO NOT USE IN CONJUNCTION WITH HIGH LEVEL INPUT WIRES. Wire routing is CRITICAL for NOISE FREE PERFORMANCE,Observe the following: 1.Always use high quality RCA type shielded cables. 2.Always use the shortest lenght possible.
(C)TRI MODE TRI MODE OPEA TIONAL OUTPUT allows a Crossover(Subwoofer) to be operated in MONO mode while the main speaker is playing in stereo. Leave the Crossover(Subwoofer)Switch on FULL position.
12 11 Model:OV4-840/OV4-1200/OV4-1600 (A)4 CHANNEL MODE (B)3 CHANNEL MODE (C)2 CHANNEL MODE COMPONENT V ALUES FOR 6dB P ASSIVE CROSSOVER FREQUENCY 80Hz 100Hz 120Hz 150Hz INDUCTOR CAP ACITOR 7.
13 14 TROUBLE SHOOTING GUIDE SYMPTOMS CHECK POINTS CURE NO SOUND In the power LED illuminated? Check fuses in amplifier . Be sure T urn-on lead is connected Check signal leads.Check gain control. Check T uner/Deck volume level. Clean contacts on fuse holders.
THD <0.02% <0.02% <0.02% <0.02% <0.02% SPECIFICA TIONS 16 MODEL NO MAX Power@2 Ohm RMS @4 Ohm Bridged Power Signal/Nosie Ratio Frequency Response 1.
An important point after buying a device Power Acoustik OV2-420/OV2-600/OV2-800/OV2-1250/OV2-1800 OV2-2200/OV2-2600/OV4-840/OV4-1200/OV4-1600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Power Acoustik OV2-420/OV2-600/OV2-800/OV2-1250/OV2-1800 OV2-2200/OV2-2600/OV4-840/OV4-1200/OV4-1600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Power Acoustik OV2-420/OV2-600/OV2-800/OV2-1250/OV2-1800 OV2-2200/OV2-2600/OV4-840/OV4-1200/OV4-1600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Power Acoustik OV2-420/OV2-600/OV2-800/OV2-1250/OV2-1800 OV2-2200/OV2-2600/OV4-840/OV4-1200/OV4-1600 you will learn all the available features of the product, as well as information on its operation. The information that you get Power Acoustik OV2-420/OV2-600/OV2-800/OV2-1250/OV2-1800 OV2-2200/OV2-2600/OV4-840/OV4-1200/OV4-1600 will certainly help you make a decision on the purchase.
If you already are a holder of Power Acoustik OV2-420/OV2-600/OV2-800/OV2-1250/OV2-1800 OV2-2200/OV2-2600/OV4-840/OV4-1200/OV4-1600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Power Acoustik OV2-420/OV2-600/OV2-800/OV2-1250/OV2-1800 OV2-2200/OV2-2600/OV4-840/OV4-1200/OV4-1600.
However, one of the most important roles played by the user manual is to help in solving problems with Power Acoustik OV2-420/OV2-600/OV2-800/OV2-1250/OV2-1800 OV2-2200/OV2-2600/OV4-840/OV4-1200/OV4-1600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Power Acoustik OV2-420/OV2-600/OV2-800/OV2-1250/OV2-1800 OV2-2200/OV2-2600/OV4-840/OV4-1200/OV4-1600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
