Instruction/ maintenance manual of the product DB27H48YT Poulan Pro
Go to page of 32
IMPORTANT MANUAL Do Not Throw Away OPERATOR'S MANUAL MODEL: DB27H48YT LAWN TRACTOR WARNING: Read this Manual and follow all Warnings and Safety Instructions, Failure to do so can result in serious injury. ALWAYS WEAR EYE PROTECTION DURING OPERATION Visit our website: www.
SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS FAILURE TO OBSERVE THE FOLLOWINGSAFETY INSTRUCTION.
SAFETY RULES & Safe Operation Practices for Ride-On Mowers III. CHILDREN Tragic accidents can occur if the operator is not alert to the presence of children.
PRODUCT SPECIFICATIONS Gasoline Capacity 4.0 Gallons and Type: Unleaded Regular Oil Type (API-SG-SL): SAE 30 (above 32°F) SAE 5W-30 (below 32°F) Oil Capacity: W/Filter: 4.0 Pints W/O Filter: 3.75 Pints Spark Plug: Champion QC12YC (Gap: .040") Ground Speed (MPFI): Forward: 5.
UNASSEMBLED PARTS Steering Wheel Steering Wheel Adapter Steering Wheel Insert (1) Large Flat Washer Steering Sleeve (1) Hex nut 1/2-2¢ (1) Hex Bolt 1/4-28 x 1-1/4 Nose Roller Nose Roller _R etainer S.
ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes, To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely, Use the correct tools as necessary to insure proper tightness.
ASSEMBLY SEAT SHOULDER BOLT SEAT PAN FLAT WASHER ADJUSTMENT KNOB FIG. 2 CHECK BATTERY (See Fig. 3) • Lift hood to raised position, • If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps.
ASSEMBLY TO ATTACH NOSE ROLLER (See Fig. 4) • Assemble brackets "A" and "B" to the inside of mower mounting brackets as shown. Tighten securely. NOTE: Be sure bracket tabs are positioned in tab holes in mower brackets. • Position nose roller between brackets and install rod and retainer spring.
ASSEMBLY LOCK BRACKET BELT TENSION ROD (DISENGAGED POSITION) CHASSIS . _. ; _ BRACKET ELECTRIC CLUTCH PULLEY FRONT MOWER BRACKET FRONT SUSPENSION BRACKETS DOUBLE LOOP I RETAINER SPRING FRONT PLATE ASS.
OPERATION These symbols may appear on your tractor or in literature supplied with the product, Learn and understand their mean- ing, H L IXI FAST REVERSE NEUTRAL HIGH LOW CHOKE SLOW IGNITION SWITCH EN.
OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of vario.
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while op- erating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.
OPERATION TO ADJUST GAUGE WHEELS (See Fig. 9) Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position, Gauge wheels t.
OPERATION • Avoid stopping or changing speed on hills, • If slowing is necessary, move throttle control lever to slower position. • If stopping is absolutely necessary, push clutch/brake pedal q.
OPERATION WARM WEATHER STARTING (50° F and above) • When engine starts, slowly push choke control in until the engine begins to run smoothly. If the engine starts to run roughly, pull the choke control out slightly for a few seconds and then continue to push the control in slowly.
MAINTENANCE AS YOU COMPLETE R EGU LARSE RVlCE V,OE O TES Check Brake Operation _ Check Tire Pressure Check Operator Presence and T ROS Systems I1_ R Check for Loose Fasteners I_ _5 I_ A Sharpen/Replac.
MAINTENANCE TRACTOR Always observe safety rules when performing any main- tenance. BRAKE OPERATION If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry .
MAINTENANCE TRANSAXLE PUMP FLUID 5/8" BOLT OR PIN CENTER HOLE BLADE FIG. 14 BATTERY You rtractor has a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an automotive charger will extend its life.
MAINTENANCE • Unlock drain valve by pushing inward and turning counterclockwise, • To open, pull out on the drain valve, • After oil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown.
SERVICE AND ADJUSTMENTS WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUST- MENTS: • Depress clutch/brake pedal fully and set parking brake. • Place motion control lever in neutral (N) position. • Place attachment clutch in "DISENGAGED" position.
SERVICE AND ADJUSTMENTS Position front plate assembly between front mower brackets, Raise deck and plate assembly to align holes and insert flanged pins, Secure pins with double loop retainer springs .
SERVICE AND ADJUSTMENTS BOTH FRONT PLATE LINKS MUST BE EQUAL IN LENGTH NUT"D"_ J_ - NUT"C" • TRUNN,ON FRONT PLATE AS- /.' 1 "_ FIG. 22 TO REPLACE MOWER DRIVE BELT MOWER DRIVE BELT REMOVAL (See Fig. 23) • Remove screws from R.
SERVICE AND ADJUSTMENTS TO REPLACE MOWER BLADE (SECONDARY) DRIVE BELT (See Fig. 24) Park the tractor on level surface. Engage parking brake, • Remove mower (See "TO REMOVE MOWER" in this section of manual), • Remove screws from R.H, and L,H.
SERVICE AND ADJUSTMENTS • If distance is other than 1-9/16", loosen jam nut and • turn nut "A" until distance becomes 1-9/16", Retighten • jam nut against nut "A", • Engage transmission by placing freewheel control in "transmission engaged" position.
SERVICE AND ADJUSTMENTS MOTION CONTROL LEVER -_ ,NEUTRAL LOCK GATE FIG. 27 BOLT TRANSMISSION REMOVAL/REPLACEMENT Should your transmission require removal for service or replacement, it should be purged after reinstallation and before operating the tractor.
SERVICE AND ADJUSTMENTS REPLACING BATTERY (See Fig. 30) TO REPLACE FUSE Replace with 20 amp automotive-type plug-in fuse, The fuse holder is located behind the dash. & WARNING: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time.
STORAGE Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more, _ WARNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark.
TROUBLESHOOTING POINTS PROBLEM Will not start Hard to start Engine will not turn over Engine clicks but will not start Loss of power Excessive vibration CAUSE 1. Out of fuel. 2. Engine not "CHOKED" properly. 3. Engine flooded. 4. Bad spark plug.
TROUBLESHOOTING POINTS CAUSE CORRECTION PROBLEM Engine dies when tractor is shifted into reverse Engine continues to run when operator leaves seat with attachment clutch engaged Poorcut-uneven Mower b.
LIMITED WARRANTY The Manufacturer warrants to the original consumer purchaser that this product as manufactured is free from defects in materi- als and workmanship.
SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION Co ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL 15 DEGREES MAX. 1. Fold this page along dotted line indicated above. 2. Hold page before you so that its left edge is vertically parallel to a tree trunk or other upright structure.
PARTS AND SERVICE This product has been expertly engineered and carefully manufactured to rigid quality standards. As with all mechanical products, some adjustments or part replacement may be necessary during the life of your unit.
An important point after buying a device Poulan Pro DB27H48YT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Poulan Pro DB27H48YT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Poulan Pro DB27H48YT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Poulan Pro DB27H48YT you will learn all the available features of the product, as well as information on its operation. The information that you get Poulan Pro DB27H48YT will certainly help you make a decision on the purchase.
If you already are a holder of Poulan Pro DB27H48YT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Poulan Pro DB27H48YT.
However, one of the most important roles played by the user manual is to help in solving problems with Poulan Pro DB27H48YT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Poulan Pro DB27H48YT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
