Instruction/ maintenance manual of the product 2250 Poulan Pro
Go to page of 13
Poulan _1_ Please do not return unit to retailer. Por favor, no devuelva el aparato al lugar de compra. Veuillez ne pas retourner I'outU au d_taillant.
WARNING: Always disconnect spark plug wire and place wire where it cannot contact spark plug to prevent accidental starting when setting up, transporting, ad- justing or making repairs except carburetor adjustments. Because a chain saw is a high-speed wood- cutting tool, special safety precautions must be observed to reduce the risk of accidents.
• Turn the engine off and let saw cool in a non-combustible area, not on dry leaves, straw, paper, etc. Slowly remove fuel cap and refuel unit. • Store the unit and fuel in an area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.
MAINTAIN CONTROL Stand to the left of the saw Never reverse hand positions Elbow locked Thumb on underside of handlebar • Keep a good, firm grip on the saw with both hands when the engine is running and don't let go. Afirm grip will help you reduce kickback and maintain control of the saw.
SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnormal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people.
Bar Clamp Nuts Guide Bar Proper chain direction Place chain onto the sprocket CHAIN TENSION (including units with chain already installed) NOTE: When adjusting chain tension, make sure the bar nuts are finger tight only. Attempting to tension the chain when the bar nuts are tight can cause damage.
WARNING: The chain must not move when the engine runs at idle speed. If the chain moves at idle speed refer to CARBU- RETOR ADJUSTMENT within this manual. Avoid contact with the muffler. A hot muffler can cause serious burns. To stop the engine move the switch to the STOP or OFF position.
ditions that can cause the tree to fall in a par- ticular direction. Natural conditions that can cause a tree to fall in a particular direction include: • The wind direction and speed. • The lean ofthe tree. The lean ofa tree might not be apparent due touneven or sloping terrain.
• Cut shattered wood very carefully; sharp pieces of wood could be flung toward op- erator. • Use a sawhorse to cut small logs. Never allow another person to hold the log while cutting and never hold the log with your leg or foot. • Do not cut in an area where logs, limbs, and roots are tangled such as in a blown down area.
REMOVING A PINCHED SAW (A SAW HUNG IN THE LOG) • If saw becomes pinched or hung in a Iog_ don't try to force it out. You can lose con- trol of the saw resulting in personal injury and/or damage to the saw. Stop the saw and drive plastic or wooden wedge into the cut until saw can be removed easily.
AIR FILTER CAUTION: Do not clean filter in gasoline or other flammable solvent to avoid creating a fire hazard or producing harmful evapora- tive emissions, Cleaning the air filter: A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions.
ELECTROLUX HOME PRODUCTS NORTH AMERICA, Division ofWCI Oat* door Products, Inc., warrants tothe origi- nal purchaser that each new Poulan or Pou- lan PRO brand gasoline chain saw is free from defects .
begins on the date the lawn and garden equipment engine is purchased. LENGTH OF COVERAGE: This warranty shall be for a period of two years from the initial date of _urchase.
An important point after buying a device Poulan Pro 2250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Poulan Pro 2250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Poulan Pro 2250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Poulan Pro 2250 you will learn all the available features of the product, as well as information on its operation. The information that you get Poulan Pro 2250 will certainly help you make a decision on the purchase.
If you already are a holder of Poulan Pro 2250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Poulan Pro 2250.
However, one of the most important roles played by the user manual is to help in solving problems with Poulan Pro 2250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Poulan Pro 2250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
