Instruction/ maintenance manual of the product 183618 Poulan Pro
Go to page of 32
OWNER'S MANUAL MODEL NUMBER: PP5524ESA SNO W THR O WER Alwa ys W ear Eye Pr otection During Operation IMPOR T ANT MANU AL Do Not Thr ow A way 183618 Re v . 5 09.26.02 BY Printed in U.S .A. W ARNING: Read the Owner's Manual and fol low all W arnings and Safety In struc tions.
2 Safe Operation Practices f or Snow Thrower s IMPORT ANT : This machine is capable of amputating hands and f eet and throwing objects. F ailure to obser v e the follow ing saf ety instr uctions could result in serious injur y or death. SAFETY R ULES W ARNING: This snow thro wer is for use on sidewalks, drivewa ys and other ground le vel surfaces.
3 PR ODU CT SPECIFICA TIONS Gasoline Capacity 3.5 Quar ts and T ype: Unleaded Regular only Oil T ype SAE 30 (abov e 40°F) (API-SF-SJ): SAE 5W -30 or 10W -30 (0° to +40°F) SAE 0W -30 (below 0°F) Oil Capacity: 21 Ounces Spark Plug: Champion RN4C (Gap: .
4 P AR TS P A CKED SEP ARA TEL Y IN CAR T ON MAINTENANCE ..................................................... 14-15 MAINTENANCE SCHEDULE ..................................... 14 SER VICE AND AD JUST MENTS ........................... 16-18 ST ORA GE .
5 ASSEMBL Y / PRE-OPERA TION Read these instructions and this man u al in its entirety bef ore you attempt to assemble or operate y our new sno w thrower . Y our new snow thro wer has been as sem bled at the f actor y with the e x cep tion of those par ts left unassembled f or shipping pur poses .
6 ASSEMBL Y / PRE-OPERA TION INST ALL A UGER CONTROL R OD (See Figs. 5 and 6) The auger control rod has the shor t loop on the end of the spring as shown. 1. Slide rubber slee ve up rod and hook end of spring into control ar m with loop opening up as sho wn.
7 ASSEMBL Y / PRE-OPERA TION INST ALL WEIGHT BA G (See Fig. 8) Though seldom required, the weight bag will re duce the ten den cy of the auger housing to ride up on hard, icy dr ifts. Should conditions require it, install as f ollows: 1. Shut off engine and wait f or all moving par ts to stop .
8 OPERA TION KNO W Y OUR SNO W THR O WER READ THIS O WNER'S MANUAL AND ALL SAFETY R ULES BEFORE OPERA TING Y OUR SNO W THRO WER. Compare the illustrations with y our snow thrower to f amiliarize yourself with the location of v arious controls and adjustments.
9 OPERA TION Choke Control - used f or star ting a cold engine. Drive speed control le ver - used to select forw ard or re verse motion and speed of snow thro wer . T raction drive control lever - used to engage power-pro- pelled f or ward or re verse motion of sno w thrower .
10 The operation of any sno w thrower can result in f oreign objects thrown into the ey es, which can result in se vere e ye damage. Alwa ys wear saf ety glasses or eye shields while oper ating your sno w thrower or perf or ming an y ad just - ments or repairs.
11 OPERA TION DRIVE SPEED CONTROL LEVER TRA CTION DRIVE CONTROL LEVER A UGER CONTROL LEVER T O THRO W SNO W (See Fig. 15) The auger rotation is controlled by the auger control le ver located on the right side handle. • Squeeze auger control le ver to handle to engage the auger and throw sno w .
12 ENGINE OIL FILL CAP / DIPSTICK FUEL SHUT - OFF V AL VE PRIM ER SAFETY IG NI TION KEY THRO T TLE CHOKE CONTROL ST ARTER BUTT ON RECOIL ST ARTER HANDLE GAS O LINE FILLER CAP NO TE: ALL ITEMS ARE SHO WN IN THEIR TYPICAL LOCA TION. A CTUAL LOCA TION MA Y V AR Y WITH ENGINE ON Y OUR UNIT .
13 COLD ST AR T - ELECTRIC ST ARTER 1. Inser t saf ety ignition ke y into the ignition slot until it clicks . DO NO T tur n the k ey . K eep the extr a safety ignition ke y in a safe place . 2. Place throttle control in F AST position. 3. Rotate choke control to FULL position.
14 MAINTENANCE LUBRICA TION CHART GENERAL REC OM MEN DA TIONS The warranty on this sno w thrower does not co ver items that hav e been sub ject ed to operator abuse or negligence. T o receive full v alue from the warranty , operator must maintain snow thro wer as in str uct ed in this manual.
15 MAINTENANCE V -BEL TS Check V -belts f or deterioration and wear after e ver y 50 hours of operation and replace if necessary . The belts are not ad just able. Replace belts if they begin to slip from wear . (See “T O REMO VE BEL T CO VER” in the Ser vice and Adjustments section of this manual).
16 SER VICE AND ADJUSTMENTS W ARNING: T o a void serious injury , before perf orming any service or ad- just ments: 1. Be sure thr ottle is in STOP position. 2. Remove safety ignition ke y . 3. Make sure the augers and all mo v ing parts have completely stopped.
17 SER VICE AND ADJUSTMENTS T O REPLA CE BEL TS (See Fig. 21) The auger and traction drive belts are not adjustab le. If the belts are damaged or begin to slip from wear , the y should be replaced. It is recommended that the belt(s) be replaced by a qualifi ed service center .
18 ST ORA GE Immediately prepare your sno w thrower f or storage at the end of the season or if the unit will not be used for 30 da ys or more. W ARNING: Never store the sno w thro wer with gaso line .
19 Does not start 1. Fuel shut-off valv e (if so 1. T ur n fuel shut-off v alve to OPEN position. equipped) in OFF position. 2. Safety ignition k ey 2. Inser t saf ety ignition ke y . is not inser ted. 3. Out of fuel. 3. Fill fuel tank. 4. Throttle in STOP position.
20 REP AIR P ARTS SNO W THRO WER - MODEL NUMBER PP5524ESA A UGER HOUSING / IMPELLER ASSEMBL Y 6 6 5 6 6 9 12 2 1 3 7 7 8 6 11 28 27 27 19 30 26 25 24 23 22 18 21 20 19 28 19 31 25 24 26 23 29 21 21 19.
21 KEY P ART NO . NO . DESCRIPTION 1 183578 Bag, Weight 2 183577 Brac ket, Weight Bag 3 74520524 Screw , Hex Head 5/16-18 x 1-1/2 4 181083 Pulley , Impeller 5 175323 Bearing Assembly , Flange 6 155377.
22 REP AIR P ARTS SNO W THRO WER - MODEL NUMBER PP5524ESA CONTR OL P ANEL / DISCHARGE CHUTE 1 2 6 7 4 5 6 8 8 19 2 2 14 26 28 27 27 25 20 29 24 18 13 14 3 11 12 11 9 14 16 17 15 10.
23 REP AIR P ARTS SNO W THRO WER - MODEL NUMBER PP5524ESA CONTR OL P ANEL / DISCHARGE CHUTE KEY P ART NO . NO . DESCRIPTION 1 183334 Knob , Lev er 2 17501010 Screw #10-24 x 5/8 3 179096X479 Strap , Sl.
24 REP AIR P ARTS SNO W THRO WER - MODEL NUMBER PP5524ESA HANDLES 5 11 12 15 7 10 33 18 19 37 34 35 20 20 21 21 6 11 5 36 13 2 5 15 11 4 4 3 3 16 17 16 23 22 24 27 26 24 25 27 22 17 1 4 4 14 5 8 6 9 3.
25 KEY P ART NO . NO . DESCRIPTION 1 178875X479 Lev er , A uger Control, RH 2 178648X479 Lev er , T raction Drive Control, LH 3 179439 Nut, Cage 1/4-20 4 178888 Bushing, Flange 5 169675 Retainer , Hai.
26 REP AIR P ARTS SNO W THRO WER - MODEL NUMBER PP5524ESA DRIVE 35 33 15 41 22 34 29 22 31 26 7 2 43 2 11 3 3 25 24 23 12 32 27 44 20 21 21 22 16 1 17 15 2 4 13 1 1 2 5 3 1 2 5 3 3 5 1 2 3 13 1 5 2 7 .
27 KEY P ART NO . NO . DESCRIPTION 1 146315 Screw , Hex Head 5/16-18 x 3/4 2 73800500 Nut, Lock 5/16-18 3 155415 W asher , Flat 4 17490508 Screw , Hex Head 5/16-18 x 1/2 5 180017 Bearing, Flange 6 180.
28 REP AIR P ARTS SNO W THRO WER - MODEL NUMBER PP5524ESA CHASSIS / ENGINE / PULLEYS 10 21 6 19 17 10 21 22 23 2 1 3 4 6 7 8 9 12 13 15 27 26 25 24 18 7 6 20 14 28 6 30 29 31 31 47 48 46 40 44 26 11 4.
29 KEY P ART NO . NO . DESCRIPTION 1 181044 Spring, T raction Idler 2 180522 Pulley , Idler (2-1/4) 3 - - - Engine , T ecumseh, Model Number OHSK55 (Order par ts from Engine manuf acturer) 4 74780520 .
30 REP AIR P ARTS SNO W THRO WER - MODEL NUMBER PP5524ESA WHEELS / DECALS 1 2 3 3 5 5 6 4 4 1 2 5 3 1 4 2 1 10 7 6 8 9.
31 KEY P ART NO . NO . DESCRIPTION 1 179264 Wheel Assembly (13") 2 155443 Pin, Klik 1/4 3 150078 Screw , Hex Head 5/16-18 x 3/4 4 17490508 Screw , Hex Head 5/16-18 x 1/2 5 179830 Bearing, Axle 6 174697 W asher , Thr ust (1") NO TE: All component dimensions given in U .
giving the complete mfg. ID#, serial number and date of purchase of your product and the name and address of the authorized dealer from whom it was purchased. THIS W ARRANTY DOES NO T APPL Y T O INCIDENT AL OR CONSEQUENTIAL D AMAGES AND ANY IMPLIED WA R RAN TIES ARE LIMITED TO THE SAME TIME PERIODS ST A TED HEREIN FOR OUR EXPRESSED W AR- RAN TIES.
An important point after buying a device Poulan Pro 183618 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Poulan Pro 183618 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Poulan Pro 183618 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Poulan Pro 183618 you will learn all the available features of the product, as well as information on its operation. The information that you get Poulan Pro 183618 will certainly help you make a decision on the purchase.
If you already are a holder of Poulan Pro 183618, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Poulan Pro 183618.
However, one of the most important roles played by the user manual is to help in solving problems with Poulan Pro 183618. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Poulan Pro 183618 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
