Instruction/ maintenance manual of the product SD200 POSIFLEX Business Machines
Go to page of 10
Part 1 FCC Notes: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications.
Part 2 GENERAL DESCRIPTION OVERVIEW This manual covers side mount attachment upgrade kits KP100, SD100, SD200 and the rear top moun t attachment kit PD302 for Posiflex Jiva series terminals and the extended side mount attachment kits KP110/SD110/SD210 for the touch monitor TM4115.
Part 3 INSTALLATION 1. HARDWARE INSTALLATION A FOR SIDE MOUNT KIT (KP or SD) Mechanical Mounting For the side mount integrated attachment kits (KP100, KP110, SD100, SD110, SD200, SD210) ordered with the host system like Jiva series or TM4115 series, it is installed on the system at delivery.
Part 4 is selected . Route the cable connection for the attachment kit to cable cover area of Jiva series or TM4115 through the side of the cable cover. Break the obstructing side wall of the cable cover in the cable entrance to the connector area according to the needs.
Part 5 from the TP series. Please remove the COM1 terminator and save it at a safe place for future use if COM1 is to be used for PD302. 4. Route the cable to go through the not ch on back of the stand assembly of touch terminal as indicated in the picture.
Part 6 layout appearance when required. The content of the programmable keys should have been organized by the system integrator and requires no installation by end users. Please use a flattop (minus sign) screw driver (Do not use the attached key clip for this operation.
Part 7 US LF <1F><0A> Move Cursor Up US CR <1F><0D> Move Cursor To Right Most Position US $ <1F><24><n><m> Move Cursor To Specified Position n = 1 ~ 20 .
Part 8 OPERATION GUIDE E - M TYPE FINGER PRINT SENSOR The Posiflex E - M type finger print sensor has been tested to operate well on reading finger prints of various skin conditions, it is still advisable to keep the scanning area clean.
Part 9 and apply gentle, even pressure. Do not “roll” your finger as usually practiced in the traditional ink and paper fingerprint taking technique. Pressing too hard will distort your fingerprint. Pressing too lightly will no t expose a large enough area of your finger.
Part 10 program covers each track enable/disable, Alt+Num approach for ASCII codes an d Leading/Stop code enable/disable. The function for enabling each track of course comes in effect only when the track is physically available.
An important point after buying a device POSIFLEX Business Machines SD200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought POSIFLEX Business Machines SD200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data POSIFLEX Business Machines SD200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, POSIFLEX Business Machines SD200 you will learn all the available features of the product, as well as information on its operation. The information that you get POSIFLEX Business Machines SD200 will certainly help you make a decision on the purchase.
If you already are a holder of POSIFLEX Business Machines SD200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime POSIFLEX Business Machines SD200.
However, one of the most important roles played by the user manual is to help in solving problems with POSIFLEX Business Machines SD200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device POSIFLEX Business Machines SD200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
