Instruction/ maintenance manual of the product 909516 Porter-Cable
Go to page of 13
ESP AÑOL: PÁGINA 13 FRANÇAISE : P AGE 25 14" Abrasive Cut-Of f Machine Instruction Manual Part No. 909516 - 02-26-03 The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for futur e refer ence.
W oodworking can be danger ous if safe and proper operating procedur es are not followed. As with all machinery , there are certain hazar ds involved with the operation of the product. Using the machine with r espect and caution will considerably lessen the possibility of personal injury .
3 Make sure switch is in “OFF” position befor e plugging in power cord. In the event of a power failure, move switch to the “OFF” position. 18. NEVER ST AND ON TOOL . Serious injury could occur if the tool is tipped or if the cutting tool is accidentally contacted.
4 A separate electrical circuit should be used for your machines. This cir cuit should not be less than #12 wire and should be protected with a 20 Amp time lag fuse. If an extension cor d is used, use only 3-wire extension cor ds which have 3- prong gr ounding type plugs and matching receptacle which will accept the machine’ s plug.
5 FOREWORD Porter -Cable Model 1400 is a 14" Abrasive Cut-Of f Machine designed to cut ferrous metals. Cutting capacities (at 90°) are: 5- 1 / 4 " Dia. r ound stock, 4- 1 / 4 " x 4- 1 / 4 " square stock, and 2- 3 / 4 " x 7- 3 / 16 " rectangular stock.
6 UNP ACKING AND CLEANING Carefully unpack the machine and all loose items fr om the shipping container(s). Remove the protective coating fr om all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or lacquer thinner for this purpose).
7 SWITCH LOCKOUT IMPORT ANT : When the tool is not in use, the switch should be locked in the “OFF” position to prevent unauthorized use, using a padlock (C) Fig. 7 with a 3/16" diameter shackle. Fig. 7 VISE Clamping the workpiece can be accomplished quickly and easily , as follows: 1.
8 ADJUSTING DOWNW ARD TRA VEL OF ABRASIVE WHEEL A stop screw (A) Fig. 12, is pr ovided to limit the downward travel of the abrasive wheel. This adjustment is made by loosening lock nut (B) and turning stop screw (A) in or out as desired. Then tighten lock nut (B).
9 OPERA TIONS MAKING THE CUT After clamping the workpiece securely in the vise, turn the machine on and allow the motor to come up to full speed. Lower the wheel (A) lightly until it comes into contact with the workpiece (B), as shown in Fig.
10 MAINTENANCE CHANGING THE WHEEL DISCONNECT MACHINE FROM POWER SOURCE. 1. Rotate the front wheel guar d (A) Fig. 21, to the up position, as shown. 2. Press in on arbor lock (B) Fig. 22, and at the same time rotate wheel (F) by hand until the arbor lock engages.
11 BRUSH INSPECTION AND REPLACEMENT DISCONNECT MACHINE FROM POWER SOURCE. Brush life varies. It depends on the load on the motor . Check the brushes after the first 50 hours of use for a new machine or after a new set of brushes have been installed.
12 A complete line of accessories is available from your Porter -Cable·Delta Supplier , Porter -Cable·Delta Factory Service Centers, and Porter -Cable Authorized Service Stations. Please visit our W eb Site www .porter -cable.com for a catalog or for the name of your nearest supplier .
The following are trademarks of POR TER-CABLE · DEL T A (Las siguientes son marcas registradas de POR TER-CABLE S.A.): Auto-Set ® , BAMMER ® , B.O.S.
An important point after buying a device Porter-Cable 909516 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Porter-Cable 909516 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Porter-Cable 909516 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Porter-Cable 909516 you will learn all the available features of the product, as well as information on its operation. The information that you get Porter-Cable 909516 will certainly help you make a decision on the purchase.
If you already are a holder of Porter-Cable 909516, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Porter-Cable 909516.
However, one of the most important roles played by the user manual is to help in solving problems with Porter-Cable 909516. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Porter-Cable 909516 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
