Instruction/ maintenance manual of the product 6642 Porter-Cable
Go to page of 13
Double Insulated Portable Electric Scr ewdrivers Instruction manual The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for futur e reference. Model No. ______________________________________ T ype ___________________________________________ Serial No.
2 WARNING: SOME DUST CREA TED BY POWER SANDING, SAWING, GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES contains chemicals known to cause cancer , birth defects or other repr oductive harm.
3 2. Dress pr operly . Do not wear loose clothing or jewelry . Contain long hair . Keep your hair , clothing, and gloves away from moving parts. Loose clothes, jewelry , or long hair can be caught in moving parts. 3. Avoid accidental starting. Be sur e switch is OFF before plugging in.
SPECIFIC SAFETY RULES AND SYMBOLS FOR SCREWDRIVERS 1. VERIFY direction of r otation of screwdriver is corr ect for operation to be performed before starting tool. 2. DO NOT attempt to change direction of r otation while switch is “ON”. T o do so may damage interlock feature built into switch.
5 MOTOR Many Porter -Cable tools will operate on either D.C., or single phase 25 to 60 cycle A.C. current and voltage within plus or minus 5 per cent of that shown on the specification plate on the tool. Several models, however , are designed for A.C.
6 1. Make sure power cir cuit voltage is the same as that shown on the specification plate of screwdriver . Connect screwdriver to power circuit. 2. Squeeze trigger switch (A), Fig. 1, to start motor , as the trigger switch is squeezed, the driver speed increases.
7 3. Release adjusting collar being sure that the depr essions in the collar engage the projections on the clutch housing. 4. Drive a test fastener in a piece of scrap material identical to that to be used.
8 TO CHANGE BIT HOLDER – MODELS 6640, 6645 1. CAUTION: DISCONNECT TOOL FROM POWER SOURCE. 2. T wist and pull the aluminum nosepiece (A), Fig. 4, out of the depth stop assembly . 3. Pull bit holder (B), Fig. 4, straight out. If it is difficult to r emove, grip with pliers and pull.
9 CAUTION: DO NOT EXER T PRESSURE ON SCREW WHILE DOING THIS. 4. Place end of screw in desir ed location and remove fingers. 5. Apply forward pr essure to drive scr ew until depth stop rests on the surface of the work. The depth stop should be adjusted so the fastener head seats firmly on the work.
10 There is a small spring in the end of the power unit spindle shaft. Be careful not to lose this spring. Note condition of 3-jaw clutch faces on power unit and screwdriver mechanism.
11 ACCESSORIES A complete line of accessories is available from your Porter -Cable • Delta Supplier , Porter -Cable • Delta Factory Service Centers, and Porter - Cable Authorized Service Stations. Please visit our W eb Site www .porter -cable.com for a catalog or for the name of your nearest supplier .
12 PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter -Cable warrants its Professional Power T ools for a period of one year from the date of original purchase.
The following are trademarks of PORTER-CABLE • DEL T A (Las siguientes son marcas registradas de PORTER-CABLE • DEL T A S.A.) (Les marques suivantes sont des marques de fabriquant de la POR TER-CA.
An important point after buying a device Porter-Cable 6642 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Porter-Cable 6642 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Porter-Cable 6642 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Porter-Cable 6642 you will learn all the available features of the product, as well as information on its operation. The information that you get Porter-Cable 6642 will certainly help you make a decision on the purchase.
If you already are a holder of Porter-Cable 6642, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Porter-Cable 6642.
However, one of the most important roles played by the user manual is to help in solving problems with Porter-Cable 6642. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Porter-Cable 6642 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
