Instruction/ maintenance manual of the product 6626 Porter-Cable
Go to page of 9
Double Insulated Impact W r ench Instruction manual The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for future reference. Model No. ______________________________________ Type ___________________________________________ Serial No.
2 GENERAL SAFETY RULES WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.
3 PERSONAL SAFETY 1. Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
4 2. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance Section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of electric shock or injury. SPECIFIC SAFETY RULES AND SYMBOLS 1.
MOTOR Many Porter-Cable tools will operate on either D.C., or single phase 25 to 60 cycle A.C. current and voltage within plus or minus 5 percent of that shown on the specification plate on the tool. Several models, however, are designed for A.C. current only.
6 NOTE: Allow motor to stop before attempting to reverse direction of rotation. Failure to do so, could damage motor. 5. TO STOP the machine, release the trigger switch. TO A TT ACH SOCKETS WARNING: Only use sockets rated for IMPACT DUTY. Other type sockets might shatter, endangering operator and bystanders.
MAINTENANCE KEEP TOOL CLEAN Periodically blow out all air passages with compressed air. ALL PLASTIC PARTS SHOULD BE CLEANED WITH SOFT CLOTHS. CAUTION: Never use any solvents to clean plastic parts. Plastics can be easily damaged by such solvents. CAUTION: Wear safety glasses when using compressed air.
8 ACCESSORIES The testing of this tool has been accomplished with the following accessories. For safest operation, it is recommended that only these accessories be used with this product. WARNING: Since accessories other than those listed have not been tested with this product, use of such accessories could be hazardous.
The following are trademarks of PORTER-CABLE Corporation (Las siguientes son marcas registradas de PORTER-CABLE S.A.) (Les marques suivantes sont des marques de fabriquant de la PORTER-CABLE Corporati.
An important point after buying a device Porter-Cable 6626 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Porter-Cable 6626 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Porter-Cable 6626 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Porter-Cable 6626 you will learn all the available features of the product, as well as information on its operation. The information that you get Porter-Cable 6626 will certainly help you make a decision on the purchase.
If you already are a holder of Porter-Cable 6626, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Porter-Cable 6626.
However, one of the most important roles played by the user manual is to help in solving problems with Porter-Cable 6626. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Porter-Cable 6626 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
