Instruction/ maintenance manual of the product 335 Porter-Cable
Go to page of 13
Double Insulated Random Orbit Sander MODEL 335 Instruction manual The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for future reference. Model No. ______________________________________ Type ___________________________________________ Serial No.
2 IMPORT ANT SAFETY INSTRUCTIONS WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the fo.
3 9 . USE SAFETY GLASSES. Wear safety glasses or goggles while operating power tools. Also face or dust mask if operation creates dust. All persons in the area where power tools are being operated should also wear safety glasses and face or dust mask.
4 5. KEEP HANDS AND BODY PARTS AWAY from rotating disc. Contact with rotating disc cause severe cuts and abrasions. 6. NEVER RUN SANDER with dust container or dust collector assembly removed. Dust could be blown into eyes. 7. WEAR EYE AND FACE PROTECTION.
5 8. CLEAN UP ALL REMOVED PAINT and dust by wet mopping the floors. Use a wet cloth to clean all walls, sills and any other surfaces where paint or dust is clinging. DO NOT SWEEP, DRY DUST OR VACUUM. Use a high phosphate detergent or trisodium (TSP) to wash and mop areas.
6 OPERA TING INSTRUCTIONS FOREWORD The Porter-Cable Random Orbit Sander provides rapid stock removal with 80 to 100 grit abrasive and swirl-free finishing with 120 to 150 grit abrasive.
7 INST ALLING/REMOVING ABRASIVE DISC Hook & Loop Abrasive: The “hook” side of the sanding pad must be exposed for use with hook & loop abrasives (see REVERSIBLE PAD). 1. CAUTION: DISCONNECT MACHINE FROM POWER SOURCE. 2. Place machine on workbench with pad up (see Fig.
Pressur e Sensitive Abrasive: The smooth side of the sanding pad must be exposed for use with pressure sensitive abrasives (see REVERSIBLE PAD). 1. CAUTION: DISCONNECT MACHINE FROM POWER SOURCE. 2. Place machine on workbench with pad up (see Fig. 5). 3.
NOTE: A slight twisting action will ease removal and reassembly. Tap container lightly to remove compacted dust. DO NOT WASH CONTAINER. Dry compressed air may be used to blow out container. CAUTION: Wear safety glasses while using compressed air. The dust collector flange contains a clear plastic disc (C) Fig.
10 USING THE SANDER 1. CAUTION: Secure work to prevent if from moving during the sanding operation. Friction between the sanding disc and work will try to spin work away from sander and may cause bodily injury. 2. CAUTION: WEAR SAFETY GLASSES AND DUST MASK.
11 SERVICE AND REP AIRS All quality tools eventually require servicing or replacement of parts due to wear from normal use. These operations, including brush inspection and replacement, should ONLY be performed by either an AUTHORIZED PORTER-CABLE SERVICE STATION or PORTER-CABLE SERVICE CENTER.
12 PRESSURE CATALOG NO. GRIT QUANTITY/PKG. SENSITIVE 72 660 06 25 60 25 ABRASIVES 72 660 08 50 80 50 72 660 10 10 100 10 72 660 10 50 100 50 72 660 12 50 120 50 72 660 15 10 150 10 72 660 15 50 150 50 72 660 22 10 220 10 72 660 22 50 220 50 HOOK & LOOP CATALOG NO.
The following are trademarks of PORTER-CABLE • DELTA Corporation (Las siguientes son marcas registradas de PORTER-CABLE • DELTA S.A.) (Les marques suivantes sont des marques de fabriquant de la PO.
An important point after buying a device Porter-Cable 335 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Porter-Cable 335 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Porter-Cable 335 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Porter-Cable 335 you will learn all the available features of the product, as well as information on its operation. The information that you get Porter-Cable 335 will certainly help you make a decision on the purchase.
If you already are a holder of Porter-Cable 335, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Porter-Cable 335.
However, one of the most important roles played by the user manual is to help in solving problems with Porter-Cable 335. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Porter-Cable 335 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
