Instruction/ maintenance manual of the product XS-3900 Polycom
Go to page of 19
June 2008 Edition 1725-36061-001 Version C VIEW Certified Configuration Guide Xirrus Wi-Fi Array XS-3500/3700/3900.
Configuration Guide 2 PN: 1725-36061-001_C.doc Trademark Information Polycom® and t he logo design s SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registe red trademarks of Polycom, Inc. in the Un ited States of Am erica and various c ountries.
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 3 Introduction Polycom’s Voice Interoperability for Enterprise Wireless (VIEW) Certification Program is designed to ensure interoperability and high performance between SpectraLink Wireless Telephones and Xirrus Wi-Fi Array infrastructure products.
Configuration Guide 4 PN: 1725-36061-001_C.doc Known Limitations Voice quality may be impaired in an environment with heavy wireless TCP traffic, such as FTP data transfers. Access Point Capacity and Positioning Please refer to the Polycom Deploying Enterprise-Grade Wi-Fi Telephony white paper.
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 5 Network Topology The following topology was used for VIEW Certification testing..
Configuration Guide 6 PN: 1725-36061-001_C.doc Configuration Settings Xirrus Arrays initially boot with all radios disabled except for the monitor radio. The monitor radio may be left enabled and in no way interferes with the SpectraLink Wireless Telephones; however it was disabled for the certification process for simplicity.
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 7 The monitor radio may also be disabled with the Web Management Interface (WMI) as shown below. 1. In the navigation pane, click IAP Settings . 2. In the IAP Settings screen, clear the Enabled check box for IAP abg2 .
Configuration Guide 8 PN: 1725-36061-001_C.doc Setting Radio Channels With the SpectraLink Wireless Teleph ones operating in 802.11b mode, at least one of the Wireless LAN Array’s Integrated Access Points (IAPs) must be set to the 2.4 GHz band. Any of th e Array’s four abg radios may be used, and up to three may be used simultaneously.
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 9 Configuring an SSID An SSID for the phones must be set on the Array. The following CLI commands show how to implement an SSID called ‘spec’.
Configuration Guide 10 PN: 1725-36061-001_C.doc This screen shows how to set up the SSID in the WMI. 1. In the navigation pane, click SSID Managemen t . 2. Type the name in the New SSID Name : field near the top of the SSID Managemen t screen. 3. Click the Create button in the upper right corner of the screen.
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 11 Setting Radio Cell Size The radio transmit powers and receive sensitivities should be set appropriately for the environment in which they are operating. The simplest way to do this is to pick an operating cell size for them.
Configuration Guide 12 PN: 1725-36061-001_C.doc This screen shows how to set the cell size and en able the radios via the IAP Settings page of the WMI. 1. In the navigation pane, click IAP Settings . 2. In the IAP Settings page, click the Enabled check box for each radio you wish to enable.
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 13 Security Enabling WPA-PSK For WPA-PSK mode, the global encryp tion cipher method must be set to TKIP with the following CLI commands:.
Configuration Guide 14 PN: 1725-36061-001_C.doc This screen shows how the global encryption cipher can be set through the WMI. 1. In the navigation pane, click Global Set tings . 2. In the Global Settings screen, click the Yes option on the TKIP Enabled line.
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 15 Setting the Pre-Shared Key The pre-shared key must be provided next. In the example below the passphrase is set to ‘11111111’ .
Configuration Guide 16 PN: 1725-36061-001_C.doc This screen shows how to set the encryption and passphras e in the SSID Management page of the WMI. 1. In the navigation pane, click SSID Managemen t . 2. Select the correct SSID from the lis t at the center top of the page.
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 1 7 Enabling WPA2-PSK If WPA2-PSK mode is desired then the global encryption cipher method should be set to AES with the following CLI c.
Configuration Guide 18 PN: 1725-36061-001_C.doc Now provide the pre-shared key (‘11111111’ in t his example): Xirrus_WLAN _Array(con fig)# security Xirrus_WLAN _Array(con fig)# ssid Xirrus_WLAN _A.
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 19 The global encryption cipher for WPA2-PSK can also be set through the WMI as illustrated in Figure 4 Global WPA Settings .
An important point after buying a device Polycom XS-3900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Polycom XS-3900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Polycom XS-3900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Polycom XS-3900 you will learn all the available features of the product, as well as information on its operation. The information that you get Polycom XS-3900 will certainly help you make a decision on the purchase.
If you already are a holder of Polycom XS-3900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Polycom XS-3900.
However, one of the most important roles played by the user manual is to help in solving problems with Polycom XS-3900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Polycom XS-3900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
