Instruction/ maintenance manual of the product 6000 Polycom
Go to page of 12
July 2008 Edition 1725-36127-001 Version F Installing the Outdoor Base Station SpectraLink 6000 System.
Installing the Outdoor Base Station 1725-36127-001-F .doc 2 Trademark Information Polycom® and the logo designs SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registered trademarks of Polycom , Inc. i n the United States of America and vari ous countries.
1725-36127-001-F .doc 3 About this Guide The Outdoor Base Station is designed to withstand environmental hazards such as rain and excessive heat and cold. The outdoor enclosure is mounted into position and the Base Station is then installed within it.
Installing the Outdoor Base Station 1725-36127-001-F .doc 4 For Technical Support: technicalsupport@polycom.com For Knowledge Base: http://www.polycom.
1725-36127-00 1-F.doc 5 Contents 0 About this Guide ................................................ 3 Polycom Corporation Model Numbers 3 Related Documents 3 Contacting Polycom 3 1 Installing Flush Against a Wall or Hard Ceiling .... 6 2 Installing on an I-Beam .
1725-36127-001-F .doc 6 Installing Flush Against a Wall or Hard Ceiling Items provided: Outdoor enclosure, Base Station Items needed: 4 anchor bolts (length and type depends on wall or ceiling material Base Station is being mounted to) 1.
Installing Flush Agai nst a Wall or Hard Ceiling 1725-36127-001-F .doc 7 4. Crimp an RJ45 onto the Base Station cable using the same wiring guide as the indoor Base Station. 5. Plug the RJ45 into the RJ48C connector. 6. Place the Base Station into the enclosure with the side of the Base Station with the mounting hole facing the wall or ceiling.
1725-36127-001-F .doc 8 Installing on an I-Beam Items provided : Outdoor enclosure, Base Station Items needed : 4 – “Caddy” or “B-Line” 3/8” Beam Clamps 4 – 1/2” long 1/4” x 20 bolts 4 – 2” long 1/4” x 20 bolts 4 – 1/4” x 20 nuts 1.
Installing on an I-Beam 1725-36127-001-F .doc 9 7. Place the Base Station into the enclosure with the side of the Base Station with the mounting hole facing the I-beam. The Base Station should fit tightly between the foam blocks. 8. Screw the outdoor enclosure lid back onto the enclosure.
1725-36127-001-F .doc 10 Installing on a Light Pole or Electrical Pole Items provided: Outdoor enclosure, Base Station Items needed: 4 - “Caddy” or “B-Line” 3/8” beam clamps 2 - EOG 100 or equivalent band clamps 1. Attach one band to the top flange of the outdoor enclosure using two beam clamps (see the figure below).
Installing on a Light Pole or an Electrical Pole 1725-36127-001-F .doc 11 7. Place the Base Station into the enclosure with the side of the Base Station with the mounting hole facing the pole. The Base Station should fit tightly between the foam blocks.
P N: 1725-36127-001-F.doc.
An important point after buying a device Polycom 6000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Polycom 6000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Polycom 6000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Polycom 6000 you will learn all the available features of the product, as well as information on its operation. The information that you get Polycom 6000 will certainly help you make a decision on the purchase.
If you already are a holder of Polycom 6000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Polycom 6000.
However, one of the most important roles played by the user manual is to help in solving problems with Polycom 6000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Polycom 6000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
