Instruction/ maintenance manual of the product 1725-36060-001 Polycom
Go to page of 16
June 2008 Edition 1725-36060-001 Version D VIEW Certified Configuration Guide Trapeze Networks Mobility System for MP-422 Access Points.
Configuration Guide PN: 1725-36060-001_D.doc 2 Trademark Information Polycom® and t he logo design s SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registe red trademarks of Polycom, Inc. in the Un ited States of Am erica and various c ountries.
Trapeze Networks: Mobility S ystem for MP 422 Access Points PN: 1725-36060-001_D.doc 3 Introduction Polycom’s Voice Interoperability for Enterprise Wireless (VIEW) Certification Program is designed to ensure interoperability and high performance between SpectraLink Wireless Telephones and wireless LAN (WLAN) infrastructure products.
Configuration Guide PN: 1725-36060-001_D.doc 4 Service Information The AP must support SpectraLink Voice Priority (SVP). Contact your AP vendor if you need to upgrade the AP software.
Trapeze Networks: Mobility S ystem for MP 422 Access Points PN: 1725-36060-001_D.doc 5 Network Topology The following topology was tested during VIEW Certification. It is important to note that these do not necessarily represent all “Certified” configurations.
Configuration Guide PN: 1725-36060-001_D.doc 6 Access Point Setup and Configuration Installing software Trapeze Mobility Exchange firmware cannot be downloaded from the SpectraLink website. Therefore, yo u must use the software that was shipped with your product, or cont act Trapeze Networks for the latest software release.
Trapeze Networks: Mobility S ystem for MP 422 Access Points PN: 1725-36060-001_D.doc 7 Service profile commands (SSID & security policy setup) WPA2-PSK Assume you are creating service pr ofile “vowlan-wpa2” to define the ESSID “phones,” as well as a WPA2-PSK security policy.
Configuration Guide PN: 1725-36060-001_D.doc 8 # defines a passphras e set service -profile V oice auth-ps k enable # enables p re-shared key authenti cation set service -profile V oice auth-do t1x disabl e # disables 802.
Trapeze Networks: Mobility S ystem for MP 422 Access Points PN: 1725-36060-001_D.doc 9 Radio configuration During VIEW Certification, the MP access points were tested directly connected to a port on the MX (e.
Configuration Guide PN: 1725-36060-001_D.doc 10 Subnet roaming configuration between multiple MX switches To set up subnet roaming between two switches, a mobility domain must be configured on both switches. Choose one of the switches to be the “seed” switch.
Trapeze Networks: Mobility S ystem for MP 422 Access Points PN: 1725-36060-001_D.doc 11 Checking the configuration Once the switch is configured, issue the following command at the command prompt to c.
Configuration Guide PN: 1725-36060-001_D.doc 12 Configuration File (For Reference Only) The following configuration file was used during VIEW Certification testing. The configuration below incl udes all configuration attributes, including defaults. Use the command show c onfiguration all for this detailed version.
Trapeze Networks: Mobility S ystem for MP 422 Access Points PN: 1725-36060-001_D.doc 13 set service -profile V oWLAN-WPA we p active-m ulticast- index 1 set service -profile V oWLAN-WPA wp a-ie disab .
Configuration Guide PN: 1725-36060-001_D.doc 14 set radio-pro file RealRad io auto-tune power -backoff- timer 10 set radio-pro file RealRad io active-scan dis able set radio-pro file RealRad io qos-mo.
Trapeze Networks: Mobility S ystem for MP 422 Access Points PN: 1725-36060-001_D.doc 15 set ap 2 name MP 02 set ap 2 bias hi gh set ap 2 bl ink disabl e set ap 2 up grade-firm ware enable set ap 2 gro.
Configuration Guide PN: 1725-36060-001_D.doc 16 set spantre e uplinkfa st disable set spantre e fwddelay 15 vlan 1 set spantre e hello 2 vlan 1 set spantree ma xage 20 vlan 1 set spantre e priority 32.
An important point after buying a device Polycom 1725-36060-001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Polycom 1725-36060-001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Polycom 1725-36060-001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Polycom 1725-36060-001 you will learn all the available features of the product, as well as information on its operation. The information that you get Polycom 1725-36060-001 will certainly help you make a decision on the purchase.
If you already are a holder of Polycom 1725-36060-001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Polycom 1725-36060-001.
However, one of the most important roles played by the user manual is to help in solving problems with Polycom 1725-36060-001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Polycom 1725-36060-001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center