Instruction/ maintenance manual of the product 1610 Polycom
Go to page of 16
1 610 Handset Diagnostic handset 1415 0200-ed2:14473_KT_1415 0200 ed1 06-12-2007 15:2.
2 1 Diagostic handset 2 Charger 3 Deplo yment 4 Subscription of the Handset 5 Menu Structure 5.1 Best Base Stations 5.2 Cur . Base 5.3 F ree Chan. 6 P ossib le Use of the Handset 1.
During nor mal operation, it tak es appro x- imately 3 1/2 hours to charge the hand- set from fully discharged to its full capa- city . Place the handset in the charger . When the handset is turned on, the dis- pla y shows the charging status in line 3.
3. Deplo yment The difficult par t of installing a DECT system is the question of where to place the base stations. The placement of the base stations is made during deployment of the site. Deployment should only be perf ormed be trained technicians. 4.
5 1415 0200-ed2:14473_KT_1415 0200 ed1 06-12-2007 15:2.
6 1415 0200-ed2:14473_KT_1415 0200 ed1 06-12-2007 15:2.
7 1415 0200-ed2:14473_KT_1415 0200 ed1 06-12-2007 15:2.
8 5.1. Best Base Stations In the “BEST BASES” menu it is possi- ble to see ho w many base stations there are in the air where the handset is pla- ced. The base stations are sorted after signal strength (RSSI). In the RFPI/MASK menu the RFPI num- ber is selected.
Class C is f or DECT local loop: Class D is f or DECT directly attached to GSM: Class E is f or PP to PP direct communi- cation: 9 ARI D ARC ARD D GOP FPN 3 20 8 = 31 bits ARI E ARC ARD E FIL FPN 3 16.
EMC: Equipment Manuf acturer’ s Code FPN: Fix ed P ar t Number RPN: Radio Fix ed P ar t Number (Base number) EIC: Equipment Installer’ s Code FPS: Fix ed P ar t Sub Number POC: Public Operator Code GOP: GSM Oper ator Code FIL: Fill bits fix ed 16-bit 0101.
Base Number (RPN) The RPN value can be read in the hand- set and can be in decimal or he x value . The he x value is read in the test mode * 99989 *, and the decimal value is in the test mode * 99981 *. MASK MASK is shown in decimal and tells ho w many bits the handset has to consider in the RFPI number .
XXXXXXXXXX: RFPI number . YY : Inde x (1 - 25). ZZ: Number of bases f ound (1 - 25). QQ: RSSI value (-99 - 00). T o select a base station press ENTER and the handset will sta y on this base stations until the handset is powered off or a LOGIN is made.
my bearer only uses one channel on the base station RF-module if the dummy bearer is jumping between the channels. When a call is on the base station all slots on the frequency are bloc k ed. The frequency on which the call is can also change, b ut this only happens if the qua- lity is getting very bad.
Note: 14 1415 0200-ed2:14473_KT_1415 0200 ed1 06-12-2007 15:2.
15 1415 0200-ed2:14473_KT_1415 0200 ed1 06-12-2007 15:2.
1415 0200-ED 2 1415 0200-ed2:14473_KT_1415 0200 ed1 06-12-2007 15:2.
An important point after buying a device Polycom 1610 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Polycom 1610 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Polycom 1610 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Polycom 1610 you will learn all the available features of the product, as well as information on its operation. The information that you get Polycom 1610 will certainly help you make a decision on the purchase.
If you already are a holder of Polycom 1610, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Polycom 1610.
However, one of the most important roles played by the user manual is to help in solving problems with Polycom 1610. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Polycom 1610 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
