Instruction/ maintenance manual of the product SRH1000 Polk Audio
Go to page of 60
User’ s Guide The Best Radio On Radio ™ ..
2 SR ° H1000 USERS GUIDE INTRODUCTION Introduction Before you do another thing, please read this owner’ s manual. Read this owner’ s manual in its entirety . Understanding the features and basic functions of your new Polk Audio Designs ™ SIRIUS Satellite Radio SR-H1000 Home T uner first will help you set up and operate it more efficiently .
2 Introduction 3 T able Of Contents 4 Warning & Safety Information 4 FCC W arning 4 FCC Compliance 4 Canadian Compliance 5 General Precautions 5 Safety Precautions 7 Copyrights & T rademarks 8.
W arning & Safety Information FCC Warning This equipment may generate or use radio frequency energy . Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in this owners guide.
General Precautions Liquid Crystal Precautions If the LCD screen on the Polk Audio Designs SIRIUS Satellite Radio Home Receiver is damaged, do not to touch the liquid crystal fluid. If any of the following situations happen, take the action indicated: 1.
13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been dam.
Copyrights & T rademarks © 2007 SIRIUS Satellite Radio Inc. All Rights Reserved. © 2006, Directed Electronics. All rights reserved. © 2005-2012 Polk Audio Designs. All Rights Reserved. No part of this work may be reproduced, modified, distributed or otherwise used without prior written permission.
Carton Contents Please unpack your SR-H1000 SIRIUS Satellite Radio T uner carefully and make sure that everything shown is present. If anything is missing or damaged, or if your unit fails to operate, notify your dealer immediately .
Controls & Features T uner 1. POWER Button. T urns the T uner On and Off/Standby . 2. REMOTE CONTROL RECEIVER. Receives signals from the wireless remote control. 3. TUNER SELECT Button. Selects the SR-H1000 “embedded” tuner or any external tuner connected, provided “the external tuner” is connected and active.
9. SCAN ( ) Buttons. Pressing this button enables the receiver to play each Channel/Preset in ascending order for 10 seconds. Scan terminates when the SCAN, CA TEGORY , CHANNEL or ENTER button is pressed. 10. NUMBER BUTTONS (0-10). Sets and selects preset channels.
Controls & Features Remote Control The wireless remote control supplied with the Receiver is capable of operating most of the features from a remote location. Each button on the remote control functions in the same way as the button on the Receiver .
3. CA T (CA TEGORY) ( ) Buttons. Navigates through categories and display screens. 4. ENTER Button. Selects a Category or Channel or Menu setting. 5. REWIND ( ) Button. Pressing this button rewinds through content saved to Instant Replay .
Getting Started Installation & Setup Introduction The SIRIUS Home Satellite Radio T uner must be connected to the windowsill antenna (supplied) to process the SIRIUS signal. The T uner recognizes and decodes the incoming SIRIUS program information and provides an audio signal to your stereo receiving equipment or other audio output equipment.
Recommended Guidelines T errestrial repeaters are located in major cities. In those areas, it may be possible to locate the windowsill antenna away from a window and still get satisfactory reception. Y ou can also place the antenna outside (on a roof structure), provided it is clear of any overhead obstructions.
Antenna Placement Consult the map for the direction in which to point the antenna. Aim the portion of the antenna with the logo on it toward the location indicated by the X on the map. T o ensure strong reception in your home, observe the following antenna placement considerations: 1.
4. T urn the T uner on and listen for audio. If no audio is heard, aim the antenna in different directions until audio output is heard. This is the desired antenna aiming position.
1. Make sure that the T uner is properly connected and that its antenna is oriented to receive the SIRIUS satellite signal. 2. Press the POWER button to turn the T uner on. After displaying the SIRIUS logo, the T uner will update all the SIRIUS channels.
Operation Display Screen Information The display screen of the Polk Audio Design’ s SR-H1000 Home T uner provides information about the operation of the receiver , such as the cur- rently tuned channel, song or show being played, artist name, time and other information.
DISP (Display) Button Pressing and releasing the DISP button from the Default display screen toggles between the artist name/song title and large character displayed text. The large character format will change the character size and cause the field to scroll from right to left.
Search Modes (Category , Channel, Artist, Song T itle) The Polk Audio Design’ s SIRIUS Home T uner has four ways to search for and select music: by category , by channel, by artist, and by song title. Each search method is discussed in the sections which follow .
Searching Channels (Channel List Mode) It is possible to search for a different channel while listening to your current channel. Be sure that the display shows the Default display screen prior to the following steps: 1. Press and hold the DISP button for two seconds to activate the channel list mode.
Direct T uning Channels can be directly accessed by pressing CHANNEL ( ) buttons or by using the 0-10 keys to enter the desired channel number . Then press ENTER to select the channel. Once the desired number has been entered, the channel will change and the display will revert to the default screen for the selected channel.
Recalling Channel Presets The 10 presets in the active bank (A, B, or C) can be selected by pressing the 0-10 buttons. 1. Press the BAND button to activate the preset bank you want. The selected bank is shown in the lower right corner of the default display screen.
Refer to the Jump Settings section in the Menu Options section for information on configuring the Jump button. If the jump button is set to T raffic, pressing the Jump button will take you to your stored traffic channel.
Channel Presets (P . TUNE Mode) Searching For A Channel Preset It is possible to quickly search through all of your presets using the CHANNEL ( ) buttons: 1. Press and hold the BAND button to enter the preset tune mode (P .TUNE). 2. The bottom right portion of the display will change to highlight the current preset number .
Preset T une List Mode While in the preset tune mode, you can view your list of presets showing channel name, artist name, or song title, just like in the channel list mode: 1. Press and hold the BAND button to enter the preset tune mode (P . TUNE). 2.
Memory (MEMO) & Song Seek (S-Seek) Functions This feature allows you to capture and store information about the programming (artist, song, sports team, or traffic city) on the currently tuned channel, up to a total of 30 items.
If either the artist name or song title is not available to save, the choice will be displayed as unavailable. Figure 10 Press CHANNEL ( ) buttons to highlight Store Artist or Store Song (when available) and press the ENTER button to save the current selection to memory .
For Sports Games: If the current tuned channel is an NFL, NBA, NHL, or College play-by-play sports broadcast, momentarily press and release the MEMO button. The receiver will display a menu to choose which sports team should be saved to memory . Figure 12 If either of the teams is not available to save, that team will be displayed as unavailable.
Figure 14 Initial Game Alert will provide an alert when the team you have chosen is playing a game. All Score Updates will provide an alert when the team you have chosen is playing a game, and also when the scores are updated for the team.
If the new alert was successfully stored in memory , an Artist/Song/Game Stored pop-up screen followed by an X Used/Y Empty screen will be displayed for one and two seconds respectively . X is the total number of listings stored in memory , and Y is the total number of memory listings still available for storage.
Press CHANNEL ( ) to select whether to replace an existing alert or cancel saving the alert to memory . If you choose to cancel saving the alert, the tuner will revert to the last active display mode. If you have chosen to replace an existing alert, a listing of all the alerts stored in memory will be displayed.
Figure 20 Deleting A Song T itle Stored In Memory T o Delete A Song T itle Stored In Memory: 1. Press the ENTER button while in S-Seek mode. A pop-up screen displaying three selectable options, Song Seek On, Song Seek Off and Delete will be displayed.
4. T o permanently delete the program from your list, highlight Y es using the CHANNEL ( ) button and press the ENTER button to confirm. 5. A Deleted popup screen followed by an X Used/Y Empty screen will be displayed for one and two seconds respectively .
3. Press CHANNEL ( ) buttons to highlight the Seek On option. 4. Press the ENTER button to turn on S-Seek. When the S-Seek option is on, when ever the tuner is turned on, it automatically searches the incoming channels to determine if a match exists with the program information stored in the S-Seek memory .
Game Alert The Polk Audio Design’ s SIRIUS Home T uner tuner can automatically identify when your favorite team is playing. When a game is found, Game Alert is displayed and the My Game Zone screen is displayed list- ing the sports games which are currently being played.
Pressing and releasing the Play/Pause ( ) button again causes the tuner to begin playing the stored audio from the point at which the tuner was paused.
When the end of the stored audio is reached, a beep will be heard, the Instant Replay mode will be exited, and the tuner will resume playing the live broadcast.
Progress Bar While playing from Instant Replay memory , status information is shown at the bottom of the tuner’ s display screen. Figure 27 The Instant Replay mode icon that is displayed at the bottom left of the screen indicates the current mode. Pause ( ) Mode This indicates that the receiver is paused and muted.
The Progress Bar is a visual indicator of the status of the Instant Replay memory . (Figure 28) As the memory fills, the Progress Bar begins to fill from the left side providing a visual indication of how much of the Instant Replay memory is filled. The end of the bar indicates the end of the stored audio, where the live broadcast begins.
Figure 30 The portion of the Progress Bar behind the Play Position indicator shows how much you can rewind in the Instant Replay memory , while the filled portion ahead of the Play Position indicator shows how much you can fast-forward in the memory .
The Instant Replay T ime Position provides the exact amount of time the Play Position indicator is behind the live broadcast, expressed as Hours:Minutes:Seconds, and displayed as a negative number .
The following selections (shown in bold text) are available from the Menu Options screen, and allow you to change the parameters for the items listed under the heading: SIRIUS ID T ime Based Features .
Game Alert Game Alert allows you to store your favorite sports teams in memory . The Polk Audio Design’ s SIRIUS Home T uner receiver will constantly scan the channels and will sound an alert when a.
3. Select the league team name or college team name you wish to add. Figure 4 Note that for college teams, you will receive an alert for all teams playing for that college. There are 30 college teams currently licensed for broadcast by SIRIUS. 4. Select the type of alert you want for that team.
Settings The Settings menu allows you access the Jump Settings, Display Options, Memory Options, Audio Level, Confirmation T one, Parental Control, OSD on/off and add/skip menu options, which are described in the sections following.
Note: If the channel list has not yet been downloaded from the SIRIUS data stream, an Updating City List notification screen will be displayed. Wait 10 minutes and then try selecting a city again. Setting The Jump Button T o A Channel T o Set The Jump Button T o Any Channel Other Than A T raffic Channel: 1.
Confirm T one The SR-H1000 Home T uner can sound an audio tone alert when the tuner powers On and Off, as well as when an S-Seek Alert is activated. The default setting is On. T o Change The T one Options: 1. Select the Confirm T one menu option. 2. Select On to enable the confirmation tone, or Off to disable the confirmation tone.
Figure 9 Parental Control The SR-H1000 Home T uner has the ability to lock a channel (or channels) you do not want others to access without your permission. Like the Skip channel feature, the locked channel will not appear when browsing channels with the CHANNEL buttons.
3. Select the channel you wish to lock or unlock from the channel list. Pressing the ENTER button will either add the text Lock next to the channel name to indicate that the channel will be locked, or unlock a locked channel by removing the text Lock.
T ime-Based Features The T ime-Based Features menu allows you access the Clock, Alarm, Program Alert, Auto Shutdown, and Sleep Mode menu options, which are described in the sections following.
Alarm The Alarm menu option allows you to set the receiver to turn on at a specific time. The last selected channel prior to shutdown will be played when the receiver powers on. When the Alarm menu option is selected, the following menu options are displayed: Set Alarm—This menu option allows you to turn the alarm feature on or off.
Auto Shutdown The Auto Shutdown menu option allows you to program the tuner to automatically shut off after a one hour period without any user intervention. After 59 minutes of inactivity , a beep tone will sound and a Cancel Auto Shutdown display prompt appears on the screen to allow you to delay the automatic shutdown.
SA T indicates satellite signal strength and TER indicates terrestrial signal strength, if available. 3. Adjust the antenna for maximum signal strength as described in the appropriate accessory manual. T o exit, press the ENTER button or press the MENU button.
If Y es is chosen, the receiver reverts to the original factory settings for the following parameters: All presets revert to empty Reset to Normal T uning Mode Reset to default screen (with 2-line PDT.
T roubleshooting Symptom Solution Receiver Does Not Power On Blown fuse, or the power cable is not properly connected. Check for a bad fuse and check power cable connection. Antenna Not Detected The satellite antenna is not connected to the receiver dock.
Specifications Audio Output 1V (Peak-to-Peak) T otal Harmonic Distortion <0.3% (THD) Signal-T o-Noise Greater than 75dB (S/N) Power AC120 ~ 60Hz,1.5A Requirements Operation T emperature 0°C ~ 70°C (indoor home or office environment) Receiver Dimensions 14.
W arranty Limited One Y ear Consumer Warranty Directed Electronics (herein “DIRECTED”) promises to the original purchaser , to replace this product should it prove to be defective in workmanship or material under normal use, for a period of one-year from the date of purchase from the dealer as indicated by the date code marking of the product.
For Y our Records Serial Number (Located on the back of your SR-H1000) : Model Number: Purchase Date: Staple Y our Receipt Here: 59 FOR YOUR RECORDS.
Polk Audio, Inc. www .polkaudio.com Customer Service: polkcs@polkaudio.com 1-800-377-7655 Outside USA & Canada: 410-358-3600 SIRIUS Satellite Radio, Inc. 1-888-539-7474 www .SIRIUS.com Directed Electronics, Inc. 1 Viper W ay Vista, CA 92081 www .directed.
An important point after buying a device Polk Audio SRH1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Polk Audio SRH1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Polk Audio SRH1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Polk Audio SRH1000 you will learn all the available features of the product, as well as information on its operation. The information that you get Polk Audio SRH1000 will certainly help you make a decision on the purchase.
If you already are a holder of Polk Audio SRH1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Polk Audio SRH1000.
However, one of the most important roles played by the user manual is to help in solving problems with Polk Audio SRH1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Polk Audio SRH1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
