Instruction/ maintenance manual of the product PWD2635W-1 Polar
Go to page of 10
PWD2635W -1 CAUTION: Before using water dispenser , r ead this manual and follow all safety rules and operating instructions. MISE EN GARDE: Avant d'employer votr e distributeur d'eau, lisez ce manuel et suivez toutes les règles de sécurité et les consignes d'utilisation.
Thank you for purchasing a POLAR ® W ate r Disp ense r . Pl eas e r ead the enc los ed oper ati ng inst ruc tion s car efu lly and r et ain thi s book let for fu tur e r ef er ence . W e have car efully engineer ed your PO LAR ® W ater Dispenser to give you years of enjoyment and trouble fr ee operation.
YOUR POLAR ® W A TER DISPENSER 1. Bottle support collar 2. Ready-T o-Dispense indicator lights: Red: “flashing” Heater (hot tank) is in operation "on” The hot water has reached optimum tem.
OPERA TING INSTRUCTIONS Initial Pr oduct Cleaning Pr ocedure Like most appliances, your water dispenser r equires periodic maintenance for maximum efficiency and performance and must be cleaned on a regular basis (i.
4. Plug in the water dispenser . 5. Set the power switch at the rear of the dispenser to the ON position. 6. Ready-to-dispense indicator lights will illuminate when the water reaches optimum temperature and is ready for use.
Dispensing Room and Cold W ater Place a glass under the spigot. For cold water , pr ess the button downward until the desired amount of water is dispensed.
Cleaning Y our W ater Dispenser IMPORT ANT : Make sure you tur n the power switch to the OFF position and unplug the dispenser before performing any of the following cleaning pr ocedures.
Cleaning the Inside of the Dispenser Like most appliances, your water dispenser r equires periodic maintenance for maximum efficiency and performance and must be cleaned on a regular basis (i.
SPECIFICA TIONS TROUBLESHOOTING TIPS A TTENTION: Do not r etur n this product to the store. For questions on operation, assembly or parts, please contact us at www .greenwayhp.com or 1-866-253-0447 . WARNING: The W ater Dispenser heats and dispenses water to 201˚ F / 91˚ C which can cause severe burns or scalding.
FREQUENTL Y ASKED QUESTIONS Q: Why is my water dispenser leaking? A: Many times a leak is caused by a defective water bottle with a small crack or pinhole (see Important Notice About Leaking Bottles, pg 4).
An important point after buying a device Polar PWD2635W-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Polar PWD2635W-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Polar PWD2635W-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Polar PWD2635W-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Polar PWD2635W-1 will certainly help you make a decision on the purchase.
If you already are a holder of Polar PWD2635W-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Polar PWD2635W-1.
However, one of the most important roles played by the user manual is to help in solving problems with Polar PWD2635W-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Polar PWD2635W-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
