Instruction/ maintenance manual of the product IrDA USB 1.1 Polar
Go to page of 17
Polar IrDA USB 1.1 Adapter and Bridge Driver User manual.
Contents 1 . G E N E R A L ................................................................................................................... 3 2 . D R I V E R I N S T A L L A T I O N ..................................................................
1. GENERAL Polar IrDA Adapter is designed for infrared data transfer between Polar heart rate monitors and other infrared products. No other use is intended or implied.
T o select a folder where setup will install files click Browse or to accept the suggested folder , click Next : USB 1.1 IrDA Bridge Driver is being installed: Polar IrDA USB 1.
T o install the software click Next . Click Finish to complete USB 1.1 IrDA Bridge Driver installation. Y ou can now safely plug in the USB 1.1 IrDA Adapter .
Driver Installation With Windows Vista Operating System For Windows® Vista operating system follow the instructions below . We recommend you insert the CD in your PC and start by installing the USB 1.1 IrDA Bridge Driver . However , if it does not, open the CD Driver IR778 and select Autorun .
Click Next to continue with the installation process. T o select a folder where setup will install files click Change or to accept the suggested folder , click Next . In case you want to review or change any settings, click Back . T o continue with the installation click Install .
USB 1.1 IrDA Bridge Driver is being installed. Click Finish to complete USB 1.1 IrDA Bridge Driver installation. Y ou can now safely plug in the USB 1.
3. HARDW ARE INSTALLA TION Plug in the Polar IRDA USB 1.1 Adapter to the USB port of your computer . Y ou will see a few pop-up screens momentarily as the device is being recognized (no user intervention required). Y ou can now start using your new Polar IrDA USB 1.
Provided the driver has been correctly installed, 'Device Manager' contents and 'Infrared Devices' now include USB 1.1-IrDA-Bridge. Detection With Windows Vista For Windows® Vista operating system follow the instructions below . The Polar IrDA USB 1.
5. EST ABLISHING IRDA CONNECTION WITH ANOTHER INFRARED DEVICE After confirming the detection of USB 1.1 IrDA Adapter , place your Polar infrared device and its IR window within one meter (39 inches) range from the infrared window at the end of the Adapter .
COMPUTER T o safely remove the Polar IrDA 1.1 USB Adapter from your PC, click the Safely Remove Hardware icon: Then select the Safely remove USB 1.1 IrDA Bridge Once Safe T o remove Hardware is shown you can unplug the Polar IrDA 1.1 USB Adapter from the PC.
Click Y es to remove the application. Click Y es to confirm. Click Finish to complete the uninstallation. Alternatively , go to Start > Settings > Control Panel > Add/Remove Program and remove Polar USB 1.1 IrDA Bridge Driver . Polar IrDA USB 1.
Uninstallation With Windows Vista For Windows® Vista operating system follow the instructions below . T o remove the Polar USB 1.1 IrDA Bridge Driver from your PC, just re-install the CD into your PC and it will automatically launch the uninstallation procedure.
The USB-Ir Adapter in now being uninstalled. The USB-Ir Adapter has now been succesfully uninstalled. Click Finish to complete the uninstallation Alternatively , go to Start > Settings > Control Panel > Add/Remove Program and remove Polar USB 1.
8. TROUBLESHOOTING If the communication fails, check that...: • ... the infrared devices are positioned correctly . The infrared windows should be within 30 degree angle, no further than one meter (39 inches) and no closer than 1 cm (0.4 inches) from each other .
Parliament and of the Council on waste electrical and electronic equipment (WEEE). These products should thus be disposed of separately in EU countries.
An important point after buying a device Polar IrDA USB 1.1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Polar IrDA USB 1.1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Polar IrDA USB 1.1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Polar IrDA USB 1.1 you will learn all the available features of the product, as well as information on its operation. The information that you get Polar IrDA USB 1.1 will certainly help you make a decision on the purchase.
If you already are a holder of Polar IrDA USB 1.1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Polar IrDA USB 1.1.
However, one of the most important roles played by the user manual is to help in solving problems with Polar IrDA USB 1.1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Polar IrDA USB 1.1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
