Instruction/ maintenance manual of the product G1 Polar
Go to page of 2
Polar Equine RS300X G1 - Getting started guide - 1. Contents of the set A. A RS300X receiver: receives and dis- plays all the data measured by the T54H transmitter and the G1 sensor. B. A G1 GPS sensor w ith its battery: measures speed and distance in real time.
5. Activate the G1 GPS in the RS300X The GPS sensor has to be activated from the training computer before it can be used: UP/DOWN > Settings > Features > S sensor > GPS .
An important point after buying a device Polar G1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Polar G1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Polar G1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Polar G1 you will learn all the available features of the product, as well as information on its operation. The information that you get Polar G1 will certainly help you make a decision on the purchase.
If you already are a holder of Polar G1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Polar G1.
However, one of the most important roles played by the user manual is to help in solving problems with Polar G1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Polar G1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
