Instruction/ maintenance manual of the product G1 Polar
Go to page of 11
G1 GPS Sensor User Manual.
1. 5. 4. 3. 2. A B.
Congratulations! Y ou are now the proud owner of a Polar G1 GPS sensor . Polar G1 provides speed and distance data in all outdoor sports using Global Positioning System (GPS) technology . The Polar G1 sensor determines your location by measuring continuously the distance between itself and at least four satellites.
Wearing Polar G1 Sensor 1. Push to open the clip (Picture 2). 2. Thread the armband loosely through the loops on the clip and fasten (Picture 3). Y ou can fasten the sensor on a belt or on the top of a backpack without the armband. 3. Position the armband round your upper arm and fasten (Picture 4).
Switching Power Mode Y ou can use the Polar G1 sensor in low or full power mode. The default mode is full power mode. By using the low power mode, you can increase battery life by up to 40 %. For maximum accuracy of speed and distance measurement, use full power mode.
Care and Maintenance The following instructions will help you fulfill guarantee obligations. • Wash the armband in a washing machine at 40°C / 104°F . Use a washing pouch. Do not soak, nor use detergent with bleach or fabric softener . Do not dry-clean.
phones, or at electric security gates. T o avoid erratic readings, move away from possible sources of disturbance. • T o avoid crosstalk from another person with a Polar G1 GPS Sensor , keep a distance of at least 2 meters/6’7” between the sensors.
Limited International Polar Guarantee • This guarantee does not affect the consumer’s statutory rights under applicable national or state laws in force, or the consumer’s rights against the dealer arising from their sales/purchase contract. • This limited Polar international guarantee is issued by Polar Electro Inc.
This product is compliant with the Directive 1999/5/EC and 93/42/EEC. The relevant Declaration of Conformity is available at www .support.polar .fi/declaration_of_conformity . This Category II radiocommunication device complies with Industry Canada Standard RSS-310.
and logos marked with a ™ symbol in this user manual or in the package of this product are trademarks of Polar Electro Oy . The names and logos marked with a ® symbol in this user manual or in the package of this product are registered trademarks of Polar Electro Oy .
Manufactured by Polar Electro Oy Professorintie 5 FIN-90440 KEMPELE T el +358 8 5202 100 Fax +358 8 5202 300 www .polar .fi.
An important point after buying a device Polar G1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Polar G1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Polar G1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Polar G1 you will learn all the available features of the product, as well as information on its operation. The information that you get Polar G1 will certainly help you make a decision on the purchase.
If you already are a holder of Polar G1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Polar G1.
However, one of the most important roles played by the user manual is to help in solving problems with Polar G1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Polar G1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
