Instruction/ maintenance manual of the product Cycling Computer Polar
Go to page of 8
The Polar Speed Sensor W .I.N.D. is designed to measure speed and distance when cycling. No other use is intended or implied. Please follow the pictures on the front cover .
2. Attach the rubber part to the speed sensor (picture 3). 3. Pass the cable ties over the speed sensor and rubber part (picture 4). Adjust the sensor to the front fork so that the POLAR logo faces outwards. Adjust the ties loosely . Do not tighten them fully yet.
Speed Sensor T eaching The cycling computer has to be coded to the Speed Sensor i.e. taught to receive speed and distance data. This enables exercising in a group without interference from other sensors.
Care and Maintenance Keep the speed sensor clean. Clean it with a mild soap and water solution and rinse off with clean water . Dry it carefully with a soft towel. Never use alcohol or any abrasive material such as steel wool or cleaning chemicals. Do not immerse the speed sensor in water .
• If the 0.0 reading appears irregularly , this may be due to temporary electromagnetic interference in your current surroundings. • If the 0.0 reading is constant, you may have exceeded 3000 riding hours and the battery is empty . … Check speed is displayed? • Make sure your speed sensor is positioned correctly .
Limited Polar International Guarantee • This limited Polar international guarantee is issued by Polar Electro Inc. for consumers who have purchased this product in the USA or Canada. This limited Polar international guarantee is issued by Polar Electro Oy for consumers who have purchased this product in other countries.
This crossed out wheeled bin marking shows that Polar products are electronic devices and are in the scope of Directive 2002/96/EC of the European Parliament and of the Council on waste electrical and electronic equipment (WEEE). These products should thus be disposed of separately in EU countries.
Disclaimer The material in this manual is for informational purposes only . The products it describes are subject to change without prior notice, due to the manufacturer’s continuous development program.
An important point after buying a device Polar Cycling Computer (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Polar Cycling Computer yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Polar Cycling Computer - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Polar Cycling Computer you will learn all the available features of the product, as well as information on its operation. The information that you get Polar Cycling Computer will certainly help you make a decision on the purchase.
If you already are a holder of Polar Cycling Computer, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Polar Cycling Computer.
However, one of the most important roles played by the user manual is to help in solving problems with Polar Cycling Computer. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Polar Cycling Computer along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
