Instruction/ maintenance manual of the product PLUS V-1080 PLUS Vision
Go to page of 72
PO W E R AUTO MENU S TAT US POWER SOURCE QUICK MENU O N O F F F R E E Z E M U T E P IP D IG IT A L R G B Y P b P r V ID E O S -V ID E O Y C b C r Q U IC K ENTER Z O O M VOL VKSTN HKSTN CANCEL M E N U .
E-2 IMPOR T ANT SAFETY INFORMA TION Pr ecautions Please read this manual carefully bef ore using y our PLUS V -1080 / V -807 Data Projector and k eep the man ual handy for future ref erence. CAUTION TO PREVENT SHOCK, DO NO T OPEN THE CABINET . NO USER-SER VICEABLE PA R TS INSIDE.
E-3 Important Safeguar ds These saf ety instructions are to ensure the long lif e of the unit and to pre vent fire and shoc k. Please read them carefully and heed all warnings. Installation •F or best results , use the unit in a darkened room. • Place the unit on a flat, le vel surf ace in a dr y area aw ay from dust and moisture .
E-4 Fir e and Shock Precautions • Ensure that there is sufficient v entilation and that vents are unobstructed to pre vent the b uildup of heat inside the unit. Allow at least 10 cm (3 inches) of space between the unit and walls . • Pre vent f oreign objects such as paper clips and bits of paper from f alling into the unit.
E-5 Major Features Book-sized, lightweight (at about 0.9 kg/2.0 lbs) and small high-inten- sity mobile pr ojector DMD TM and the synergistic eff ects of our own optical design serve to improv e the optical utilization efficiency . The three light sources (RGB) required in color e xpression are reproduced with one DMD TM .
E-6 T able of Contents Pr eparation and Backgr ound Knowledge IMPORT ANT SAFETY INFORMA TION ............................................................................ E-2 Major Features ..............................................................
E-7 Menu Operations Menu Operation Method ................................................................................................ E-37 Names and Functions of the P ar ts ........................................................................
E-8 Checking the Supplied Accessories Remov e the main unit and the accessories from the box and chec k that the f ollo wing items are included. ON OFF FREEZE MUTE PIP DIGITAL RGB YPbPr VIDEO S-VIDEO .
E-9 Checking the Supplied Accessories A udio cable (2.5 mm diameter plug / RCA pin plug, 1.5 m / 4.9 feet) [1] This cable is used with equipment that has phono type audio jacks. Connections are described on Page E-23. No. 772706000 Soft pouch (f or pr ojector and accessories) [1] This pouch is used when storing or moving the projector .
E-10 Names of the Main Unit Parts POWER AUTO MENU STATUS POWER SOURCE QUICK MENU AUDIO VIDEO POWER A U TO M EN U STATUS PO W ER SOURCE Q U ICK M E N U Exhaust v ents Precautions The ventilation slots discharge the heat of the lamp and care must be taken not to come into contact with them.
E-11 Names of the Main Unit Parts AUT O S OURCE QUICK MENU PC AUDIO VIDEO P O W E R AUTO MENU STAT US POWER S O U R C E QUICK MENU PC A U D IO V ID E O F ront adjusters [E-27] Built-in Security Slot This security slot suppor ts the MicroSa ver Security System manuf actured b y K ensington Microw are Inc.
E-12 +/– button (Used in all adjustments) Names of the Remote Control Parts ON OFF FREEZE MUTE PIP DIGITAL RGB YPbPr VIDEO S-VIDEO YCbCr QUICK ENTER ZOOM VKSTN HKSTN CANCEL MENU ASPECT AUTO POWER In.
E-13 Preparing the Remote Control Button Battery Replacement Using the remote contr ol for the first time The batter y compar tment is fitted with a transpor tation insulation sheet at the time of shipping. Pull out the sheet and remov e it. The remote control is now ready f or use.
E-14 Remote Contr ol Range P oint the infrared transmitter of the remote control to w ard the remote control sensor located at the front or rear of the main unit and operate . Reception of the remote control signal should generally be possib le within the range illustrated below .
E-15 The Procedure Up to Projecting to the Screen P erf orm setup adjustments in the f ollo wing order . 1 P osition the projector See "Projection Distance and Screen Siz e" on P ages E-16 and E-17. Determine the locations to set up the screen and the projector .
E-16 Placement Guide ● Use this inf or mation as a guide to find out about the screen size when the projector is placed at a cer tain location, or to find out the appro ximate size of a screen that will be required. ● The projection distance ov er which f ocussing is adjustab le is 1.
E-17 V -1080 Screen Size and Pr ojection Distance 0 h2 h1 0.5(1.6) 1.0(3.3) 1.5(4.9) 2.0(6.6) 2.5(8.1) 3.0(9.8) 3.5(11.5) 4.0(13.1) 0.5 (1.6) 1.0 (3.3) 1.5 (4.9) 2.0 (6.6) 2.5 (8.1) 3.0 (9.8) 3.5 (11.5) 4.0 (13.1) 4.5 (14.8) 5.0 (16.4) 5.5 (18.0) 6.0 (19.
E-18 Connecting Personal Computers and Video Equipment ● Connecting this unit with a personal computer per mits presentation data to be projected as a large screen displa y at conferences, lectures , and on other occasions.
E-19 Connecting Personal Computers and Video Equipment Personal Computers with a Mini D-Sub 15-Pin Connector * Make the connection to the projector's PC connector and the mini D-sub 15-pin connector through the use of a D VI/mini D-sub 15-pin con version cab le.
E-20 Connecting Personal Computers and Video Equipment To Output the External Output Signal of a Notebook Computer When projection will be with a notebook computer connected, knowledge will be required f or the cable connection and notebook computer star tup procedure as well as the operation that f ollows notebook star tup.
E-21 Connecting Personal Computers and Video Equipment Connections with V ideo Connectors V ideo Equipment with VIDEO Connectors * Make the connection to the VIDEO connector of the projector using a video cable. * Switch the input selection of the projector to "Video".
E-22 PC VIDEO AUDIO Cr Cb Y Pr Pb Y COMPONENT COMPONENT Connecting Personal Computers and Video Equipment Connections with Component Signals When the Video Connectors ar e Y , Cb, and Cr Connectors * Mak e the connection to the projector's VIDEO connector using a component signal cable .
E-23 Connecting Personal Computers and Video Equipment Connections with Audio Connectors * Make the connection to the projector's A UDIO jack using an audio cable .
E-24 Power Cable Connections and Switching the Power On/Off There is an or der in which the po wer cable is connected and the power is s witched on/off. Operating 1 Connect the A C IN connector of the pr ojector and the po wer outlet using the sup- plied power cab le.
E-25 Power Cable Connections and Switching the Power On/Off Finishing 1 Switch off the po wer of the connected equipment 2 Switch off the po wer of the projector Main unit operation: Press and hold the POWER b utton for a while . Remote contr ol operation: Press the PO WER OFF button.
E-26 Adjustment of the Projection Screen Switch on the power of the connected equipment and make the adjustments with the video signal being input to the pr ojector . Projection Scr een Position Adjustment Adjust the projection image to the scr een. Chec k that the screen is set le vel and v er tically .
E-27 Making Adjustments with the Adjusters Adjustment of the Projection Screen P O W E R AUTO MENU S TA TU S POWER SOURCE QUICK MENU ( 1 ) ( 1 ) ( 2 ) PO W E R A U T O M E N U ST A TU S P O W E R SOUR.
E-28 General Operation This section describes the use of direct operation with the main unit or remote contr ol buttons. For information about operation using the men u, see "Menu Operation Method" on P age E-37 and the various items on P ages E-46 to E-60.
E-29 Automatic Adjustment of Analog RGB General Operation MENU AUTO SOURCE QUICK MENU ON OFF FREEZE MUTE PIP DIGITAL RGB YPbPr VIDEO S-VIDEO YCbCr QUICK ASPECT AUTO POWER This function automatically adjusts the position shift of the analog RGB input signal, the size of the picture , ver tical str iping, and color infidelity .
E-30 General Operation Selection of Aspect Ratio This function selects horizontal and vertical picture propor- tions of the input signal. Press the ASPECT b utton while viewing the projected ima ge and select the aspect ratio.
E-31 Projecting a Sub-Pictur e This function displays the video image (i.e ., the picture of the VIDEO connector input) on the personal computer screen (i.e., the PC connector input screen) as a sub-picture. Each press of the PIP b utton advances the screen size of the sub-picture one step in the sequence of Small → Medium → Large → Off (i.
E-32 General Operation Using the Quick Menu This function permits frequently used adjustments to be performed quickly . Note that the Quic k Menu will not be displa yed unless the signal of the connected equipment is input. Please select the input that y ou wish to adjust.
E-33 General Operation Brightness Adjusts the brightness of the image. Brightness decreases in the (-) direction and increases in the (+) direction. Contrast Adjusts the contrast of the image. Contrast becomes less distinct in the (-) direction and more pronounced in the (+) direction.
E-34 General Operation Correcting Keystone Distortion of the Pr ojection Scr een This adjustment is used when the projection screen is dis- torted. Note that e xtreme distor tion cannot be corrected and in such cir- cumstances the projector should be placed to f ace the screen straight on bef orehand.
E-35 General Operation Enlargement of the Image and V ideo Movement This function digitally enlarges the personal computer image and video image (up to 10 times). (1) Press the ZOOM button. The zoom selection displa y will appear . ENTER ZOOM MENU HKSTN VKSTN VOL CANCEL (4) (3) (1) (2) + – Zoom 21 (2) Enlarge to the desired size .
E-36 General Operation Adjustment of the V olume This function adjusts the v olume of the built-in speaker . (1) Press the V OL b utton. The v olume adjustment displa y will appear . ENTER ZOOM MENU HKSTN VKSTN VOL CANCEL (3) (2) (1) + – Volume 53 (2) Adjust the v olume.
E-37 Menu Operation Method ● This section describes only the menu operation method. Please see this page should y ou need infor- mation while perf orming menu operations. ● F or inf or mation about a menu function, adjustment, or setting, please see one of the pages containing such descriptions.
E-38 Menu Operation Method Names and Functions of the Main Unit Buttons Used in Menu Operation MENU AUTO SOURCE QUICK MENU STATUS POWER POWER MENU b utton Used to display men us , to retur n to menu name selections, and to close menus (i.e ., closing sub men u displa ys).
E-39 Menu Operation Method Performing Menu Operations ● The menu operations of the main unit b uttons differ from those of the remote control b uttons.
E-40 Info. Setup View Color Image Aspect Filter Projection Auto 3 Keystone 2 Press the cursor ( ) button to select the menu name Selection of the Menu Name ENTER CANCEL MENU HKSTN VKSTN Red Ea.
E-41 Info. Setup View Color Image Aspect Filter Projection Auto 3 Keystone 4 Pr ess the cursor ( ▲▼ ) button to align the cursor with the item name Selection of the Item Name ENTER CANCEL MENU HKSTN VKSTN Main unit operation: Press the (Q UICK MENU) b utton.
E-42 6 Press the MENU button and close the menu display Closing the Menu ENTER CANCEL MENU HKSTN VKSTN Main unit operation: Press the MENU button and cancel the cursor displa y . When a sub menu is displa y ed, press the MENU button to close the sub menu, then press again to cancel the cursor .
E-43 Selecting Another Menu Name with Remote Contr ol Operation Menu Operation Method When a sub menu is displa yed, press the CAN- CEL button and close the sub men u. Press the CANCEL button again and cancel the cursor displa y . Info. Setup View Color Image Aspect Filter Projection Auto 3 Keystone Info.
E-44 Analog RGB Digital RGB YPbPr YCbCr Video S-Video .
E-45 Info. Setup View Color Image Language Auto Source On Off On Black Auto Power Off On Screen Menu Position YPbPr Background Disable Analog RGB Digital RGB Video S-Video YPbPr YCbCr .
E-46 Picture ● P erf or m this operation while projecting the picture f or which the adjustment/setting will be made. ● Select the menu name "Picture". See "Menu Operation Method" on P ages E-37 to E-45 f or information about perf or ming menu operations.
E-47 Picture Adj. / Fine Pictur e / H Position / V Position These adjustments are av ailable when analog RGB signals are input. Usuall y , automatic adjustment is performed at the time of sig- nal selection, but when automatic adjustment is not eff ec- tive, these adjustments can be performed.
E-48 H Position Adjust this when the picture is shifted to the left or right. Select the "H P osition" item name and adjust with the cursor ( ) buttons . Picture V Position Adjust this when the picture is shifted up or down. Select the "V P osition" item name and adjust with the cursor ( ) buttons .
E-49 Color ● Select the menu name "Color". See "Menu Operation Method" on P ages E-37 to E-45 f or information about perf or ming menu operations. The item name displa y will diff er depending on the input signal. See "List of Item Names Off ering Input Selection and Adjustments/Settings" on P ages E-44 and E-45.
E-50 Color System This function sets the color system of the video signal. Normally , this should be set to A uto. Set this function when the system cannot be identified with A uto. Select item name "Color System" and select the setting contents with the cursor ( ) b uttons.
E-51 View ● P erf or m this operation while projecting the picture f or which the adjustment/setting will be made. ● Select the menu name "Vie w". See "Menu Operation Method" on P ages E-37 to E-45 f or information about perf or ming menu operations.
E-52 Filter This function sets the sharpness when the input signal is adjusted to the resolution of the pr ojector and enlarged or reduced. Select the item name "Filter" and select the setting contents with the cursor ( ) b uttons. Smaller numerical v alues result in a sharper picture and larger v alues result in a softer picture.
E-53 View Keystone This function corrects the keystone distortion of the pro- jected picture on the screen. Adjust so that the edges are parallel in the ver tical and the horizontal directions.
E-54 Aspect Filter Projection Auto 3 Keystone V Keystone H Keystone Keystone Save Off – + 0 – + 0 Aspect Filter Projection Auto 3 Keystone Picture in Picture Aspect Filter Projection Auto 3 Keystone Picture in Picture Size Position Off Keystone Save This function is used to save the ke ystone adjustment values.
E-55 Setup ● Select menu name "Setup". See "Menu Operation Method" on P ages E-37 to E-45 f or infor mation about perf or ming menu operations. The item name displa y will diff er depending on the input signal. See "List of Item Names Off ering Input Selection and Adjustments/Settings" on P ages E-44 and E-45.
E-56 This function switc hes off the projector po wer automatically when the input of the projector enter s a no-signal condition. Select item name "A uto P ower Off" and select the setting con- tents with the cursor ( ) b uttons. On .
E-57 Menu Position This function sets the display position of the men u. Select item name "Menu P osition" and select the setting contents with the cursor ( ) b uttons. .............. Displays on the left side .............. Displays on the right side YPbPr This setting causes the projector not to accept component YPbPr signals.
E-58 White Balance This function automatically adjusts the blac k level and the white level of the analog RGB input signal so that the y suit the personal computer . This serves to impro ve color repro- ducibility . 1. Select item name "White Balance" and press the cursor ( ) b utton.
E-59 Info. ● Select menu name "Inf o .". See "Menu Operation Method" on P ages E-37 to E-45 f or infor mation about perf or ming menu operations. The item name displa y will diff er depending on the input signal. See "List of Item Names Off ering Input Selection and Adjustments/Settings" on P ages E-44 and E-45.
E-60 Info. Resolution / Frequency This function displays the resolution and frequenc y of the detected input signal. This inf or mation will not be displa yed unless an analog RGB or digital RGB signal is input and an Analog RGB or Digital RGB input selection is made.
E-61 When the ST A TUS Indicator is Lit/Flashes ST A TUS indicator POW ER AUTO MENU STATUS POWER SOURCE QUICK MENU AUDIO VIDEO PO WER indicator When the ST A TUS indicator of the main unit operation panel is lit or flashes, notification is being given of the irregularities de- scribed.
E-62 ST A TUS Indicator POWER Indicator Action to T ake STATUS Lit red POWER When pow er is on: Lit green When pow er is off: Lit amber It is timer to replace the lamp. The lamp timer has e xceeded 1,000 hours. Replace the lamp car tridge. The lamp's service life has ended.
E-63 Tr oubleshooting Check the following matters befor e r equesting servicing. * Has the pow er plug become disconnected from the outlet? * Is the lamp cov er proper ly attached? * Has the inter nal temperature become high? When the internal temperature becomes very high, to protect the unit the po wer will not s witch on.
E-64 Tr oubleshooting * Other than f or "Setup" and "Info .", selection is not per- mitted unless a signal is input to the projector and an image or picture is projected. * There will not be a displa y unless the personal com- puter screen is being projected.
E-65 Cleaning ● Be cer tain to disconnect the power plug from the po wer outlet bef ore cleaning. ● Do not spra y or otherwise e xpose the projector , lens , or screen to v olatile substances such as insecti- cides. Do not leav e r ubber or vinyl products in contact with the projector f or long periods.
E-66 Replacing the Lamp Cartridge The rated lamp lif e is about 1,000 hours. The r ated lamp life is the av erage lif e of the lamps produced and tested (under the test conditions of our company) f or a long term, howev er , it ma y become shor ter de- pending on the conditions of usage.
E-67 Replacing the Lamp Cartridge PREP ARA TION Tu rn the projector upside down and place it on a soft cloth that has been prepared in adv ance to pre v ent scratches . This will assist in lamp car tr idge replacement. After replacement, retur n the projector to the original condition.
E-68 5. Install the new lamp cartridge (1) Slowly push in the lamp cartr idge with the sock et facing f orward. (Align the lamp car tr idge screw with the scre w hole of the projector .) (2) T ur n the 2 screws of the lamp car tr idge clock- wise to tighten.
E-69 Specifications Optical DMD TM Single Chip Digital Micro De vice (DMD TM ) V -1080: 1024 768 dots V -807: 800 600 dots Lamp 120 W high-pressure mercur y lamp Image size V -1080: 36 inch to 200 inch V -807: 35 inch to 200 inch Light Output 800 ANSI lumens Contrast Ratio 800:1 (Full on/off) Electrical Inputs Video (NTSC3.
E-70 T able of Supported Frequency VESA 640 350 31.5 70.1 – – 640 350 37.9 85.1 – – 720 350 31.5 70.0 – – 640 400 31.5 70.1 – – 640 400 37.9 85.1 – – 720 400 31.5 70.0 720 400 37.
E-71 Cabinet Dimensions MENU AUTO SOURCE QUICK MENU STATUS POWER POWER Unit: mm (inch) 45 (1.8) 180 (7.1) 141 (5.6).
* PLUS Vision Corp. is certified to ISO 14001 as a member of the PLUS group. PLUS Industrial Corporation is certified to ISO 9001. Certificate No. Q1001219118017. Otowa Head Office and PLUSLAND of PLUS Corporation and PLUS Industrial Corporation are certified to ISO 14001.
An important point after buying a device PLUS Vision PLUS V-1080 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PLUS Vision PLUS V-1080 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PLUS Vision PLUS V-1080 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PLUS Vision PLUS V-1080 you will learn all the available features of the product, as well as information on its operation. The information that you get PLUS Vision PLUS V-1080 will certainly help you make a decision on the purchase.
If you already are a holder of PLUS Vision PLUS V-1080, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PLUS Vision PLUS V-1080.
However, one of the most important roles played by the user manual is to help in solving problems with PLUS Vision PLUS V-1080. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PLUS Vision PLUS V-1080 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
