Instruction/ maintenance manual of the product PLUS Piano HE-3200 PLUS Vision
Go to page of 51
User’ s Manual HE-3200 English.
E – 2 Installation * Allow at least 10 cm (3.9 inch) of space betw een the projector top panel and its surroundings. Also allow at least 10 cm (3.9 inch) of other spaces around the pro- jector . * The projector should be placed on a flat, lev el surf ace and in a dry area free from dust and moisture.
E – 3 1) Read these instructions. All the safety and oper ating instructions should be read before the product is oper ated. 2) Keep these instructions. The saf ety and operating instructions should be retained for future ref erence. 3) Heed all warnings.
E – 4 Major Featur es High Image Quality Use of a Digital Micromirr or Device (DMD TM ) chip that is based on T exas Instrument's Digital Light Pr ocessing (DLP TM ) technology enables images of high contrast and high detail.
E – 5 T able of Contents Important Safety Information ................................ E-2 IMPORT ANT SAFETY INSTRUCTIONS ...................... E-3 Major Features ................................................. E-4 Accessories Check .............
E – 6 Accessories Check Remov e the main unit and the accessories from the box and chec k that the f ollowing items are included. Should an accessor y be missing, please contact your store of purchase .
E – 7 Names of the Main Unit Parts PO W ER O N O FF P O W E R / S T A T U S O N / S T A N D B Y A S P E C T S O U R C E V entilation outflow holes These ventilation outflow holes used for cooling the main unit and discharge the heat of the lamp. Attention! Pay special attention to the ventilation outflow holes.
E – 8 Names of the Main Unit Parts O N / S T A N D B Y A S P E C T S O U R C E P O W E R / S T A T U S DVI-D RGB S-VIDEO VIDEO Y Pb/Cb Pr/Cr Theft prevention locking hole (See below) Air intake hole This is an air intake hole used for cooling the main unit.
E – 9 Names of the Main Unit Parts Attaching the Supplied Adjusters The supplied adjusters are required f or vertical adjustment of the projector . See → P age E-22 about "Using the Adjusters" 1. Remove a rubber pad of each front foot. Note: The rubber pads are bonded.
E – 10 Names of the Remote Contr ol Parts SE T E SC M ENU ASPECT VIDEO /YPbPr ON/STANDBY S - VIDEO RGB DVI SV CV RGB DVI Remote control transmitter The infrared signal is sent from this part.
E – 11 Pr eparing the Remote Contr ol Inserting the Batteries When using the remote control f or the first time, install the batteries that were supplied. When replacing batteries, purchase two of the same type of AA battery . Press and at the same time lift the batter y case cov er at the rear of the remote control to remov e it.
E – 12 The Pr ocedur e Up to Projecting to the Scr een POW ER ON OFF P O W E R / S T A T U S O N / S T A N D B Y A S P E C T S O U R C E 1 2 3 4 7 5 9 8 6 Position the projector → P age E-13 "Projection Distance and Screen Size" Determine the locations to place the screen and the projector .
E – 13 Placement Guide Use this information as a guide to find the rough screen size when the projector is placed at a certain location, or to find out the approximate siz e of a screen that will be required. The projection distance ov er which f ocussing is adjustab le is 1.
E – 14 Screens with 16:9 Aspect Ratio (at an output size of 848 x 480) These are the projection distances for screens of 16:9 aspect r atio used f or the viewing of D VD and other squeezed screen applications.
E – 15 Installation Height of Projection Screen [Ref erence] Once the installation location and position ha ve been decided, the projection height should be chec ked. In the case of large screen sizes, there are instances where the image cannot be projected within the floor to ceiling height.
E – 16 Power Cable Connections 2 Power Cable Connections Use the supplied power cord to connect the po wer connector of the main unit with the po wer outlet. POWER ON OFF P O W E R / S T A T U S O N / S T A N D B Y A S P E C T S O U R C E 4 1 2 3 POWER switch POWER/ indicator Firmly insert all the way .
E – 17 Connecting V ideo Equipment and Personal Computers By connecting this unit with video equipment and using a D VD player or other source in combination with an audio/video amplifier and speaker system will allo w you to enjo y convincing home theater .
E – 18 D V I - D R G B C T R L S - V ID E O V I D E O Y P b / C b P r / C r G B S-VIDEO VIDEO Y Pb/Cb Pr/Cr COMPONENT COMPONENT YC b C r YP b P r G BR G BR G BR G BR 3 Connections with YCbCr/YPbPr Connectors These are connections made with equipment such as D VD play ers that ha ve YCbCr output connectors or YPbPr output connectors.
E – 19 D V I - D R G B C T R L S - V I D E O V I D E O Y P b / C b P r / C r DVI-D RGB VIDEO Y DVI-D MONITOR OUTPUT MONITOR OUTPUT 3 Connection with RGB and DVI-D Connector These connections are made with personal computers that hav e a monitor output RGB connector (analog signal) or a D VI-D connector (digital signal).
E – 20 Obtaining an Exter nal Output Signal from a Notebook Computer . When projection will be with a notebook computer connected, knowledge will be required f or the cable connection and notebook computer star tup procedure as well as the operation that f ollows notebook startup.
E – 21 Tu r ning ON or OFF Main Power POWER ON OFF STATUS POWER / POWER ON OFF POWER / STATUS Main power ON Main power OFF 4 T ur ning ON or OFF Main Power Before turning the main pow er , check that the power is s witched off the equipment that is to be connected and the connection is finished.
E – 22 P O W E R / S T A T U S O N / S T A N D B Y A S P E C T Adjustment of the Pr ojection Scr een Operations include the adjustment of the image position that is projected to the screen and the adjustment of the f ocus as well as the input selection and the selection of the aspect ratio .
E – 23 8 Input Selection 3 Press the SOURCE button and select the desired connector . SOURCE A press of the SOURCE button will displa y the selected input.
E – 24 Input Screen and Aspect Ratio Selection Scr een "XXXXX••••••" Select Full The image is projected to fill the entire screen.
E – 25 Operation with the Remote Contr ol P oint the remote control toward the remote control sensor of the main unit and operate . ESC MENU ASPECT VIDEO /YPbPr ON/STANDBY S - VIDEO RGB DVI SV CV RGB DV I SET ASPECT button This button selects the vertical and horizontal ratio of the screen of the input video.
E – 26 Input Selection Press the desir ed input selection button. VIDEO /YPbPr S - VIDEO RGB DVI SV CV RGB DV I S-VIDEO S-VIDEO YCbCr YPbPr VIDEO RGB DVI Input selection display S-VIDEO button A press of the button will s witch the input to the S-VIDEO input signal.
E – 27 Selection of Aspect Ratio (i.e., Ratio of Screen Width to Scr een Height) ASPECT Press the ASPECT button and select the desired aspect ratio. Full Aspect S-VIDEO 16:9(LB) 16:9 Real Thru Full .
E – 28 Using the On-Scr een Menu Only menu operation methods will be described here. Refer to this page should y ou need to clarify matters during menu operations. See the various pages f or inf ormation about menu functions and perf or ming adjustments and settings.
E – 29 1 Press the MENU button and display the menu. Display of the Menu Picture1 Brightness 0 Contrast 0 Color 0 Tint 0 Sharpness 0 Color Temp. Low Normal High Custom Picture2 Setup Info. VIDEO Option MENU 2 Press the button again and select the menu name.
E – 30 5 Press the ESC button and close the menu display . The selected menu name will appear in na vy b lue. Exit Sub menu items Items that displa y only an item name hav e a sub menu. Picture1 Keystone Mode Keystone - Installation - Background Auto Power Off LED Picture2 Setup Info.
E – 31 Picture1 Brightness 0 Contrast 0 Clock frequency 0 Phase 0 Color Temp. Low Normal High Custom Picture2 Setup Info. RGB Option Picture1 Brightness 0 Contrast 0 Color Temp. Low Normal High Custom Picture2 Setup Info. DVI Option Menu List This is a list of menu item names.
E – 32 Picture1 Language En De Fr It Es - Menu Position - Duration 10 sec. Picture2 Setup Info. VIDEO Option Option "On-Screen Display Language Settings" → Page E-41 "Moving the Menu Display Position" → Page E-41 "On-Screen Display Duration Adjustment" → Page E-41 [Common Inputs] Info.
E – 33 V ideo Adjustments [Pictur e 1] These are picture-related adjustments. F or inf or mation about performing menu operations , see → P age E-28 "Using the On-Screen Menus." Picture1 Brightness 0 Contrast 0 Tint 0 Clock frequency 0 Phase 0 Color Temp.
E – 34 Color T emperatur e Adjusting the White Balance This is the input picture white color selection or white and blac k le vel correction, and serves to adjust the color reproducibility . Press the cursor button ( 왖왔 ) and align the cur - sor with the desired item, then adjust with the cursor ( 왗왘 ) button.
E – 35 Clock frequency Adjusting the Clock Frequency of the Input Signal This is adjusted when light and dark ver tical bands appear on the projection screen of the RGB and YPbPr input signal.
E – 36 Input V ideo Adjustments [Pictur e 2] These functions adjust the input video signal. See → P age E- 28 "Using the On-Screen Menu" f or inf ormation about performing menu operations. Picture1 Video Filter 2 3 Zoom Filter Video Auto ProScan Mode Gamma Custom Graphics Film Video Color System Auto Picture2 Setup Info.
E – 37 Input Video Adjustments [Pictur e 2] Pan Movement of Screen Display Position This is used to mov e the screen position at the time of RGB, D VI and YPbPr input selection. Press the cursor button ( 왖왔 ) and align the cursor with [Pan], then press the SET button.
E – 38 Color System V ideo Signal Color System Settings These settings are of the color system of the com- posite video signal. This function is normally set to Auto . If the color sys- tem cannot be identified on Auto , set it manually . Press the ( 왖왔 ) cursor button and align the cursor with [Color System], then press the SET button.
E – 39 Setup These settings are used when setting up the projector . See → P age E-28 "Using the On-Screen Menu" f or information about performing menu operations . Picture1 Keystone Mode Normal Full Blue Black +0 Keystone Off On Off On - Installation - Background Auto Power Off LED Picture2 Setup Info.
E – 40 Backgr ound Background Color Settings This sets the backg round color when a signal is not being input to the connector of the projector . Press the cursor ( 왖왔 ) button and align the cursor with [Background], then make the selection with the cursor ( 왗왘 ) button.
E – 41 On-Scr een Display Settings [Option] These settings are f or the menu and language that will be displa y ed on the screen. See → P age E-28 "Using the On-Screen Menu" f or information about performing menu operations . Picture1 Language En De Fr It Es - Menu Position - Duration 10 sec.
E – 42 Resetting, Storing, and Information [Info.] This function performs resetting and the displa y of inf ormation for the method of using the user memor y , the default v alues of adjustments and settings , and the lamp timer . See → P age E-28 "Using the On-Screen Menu" f or information about perf orming menu operations.
E – 43 Resetting, Storing, and Information [Info.] Default Returning to Standard Settings This function is used to return the adjustments and settings of the current signal to the standard settings. Select the signal you wish to return to the def ault set- tings first bef ore doing so .
E – 44 Tr oubleshooting Check the f ollowing matters bef ore requesting ser vicing. * Has the power plug become disconnected from the outlet? * Is the lamp cov er properly attached? * Has the internal temperature become high? When the internal temperature becomes ve ry high, to protect the unit the pow er will not switch on.
E – 45 When the ST A TUS Indicator Is Lit/Flashes * It is time to replace the lamp . Replace with a new lamp. * Is the lamp cov er attached properly? If not, attach it properly . * The thermal protector has been activated. If the room temperature is high, move the projector to a cool location.
E – 46 Replacing the Lamp Cartridge NOTE: The projector lamp has its usable life. The rated lamp life is about 1000 hours. How- ever , it may become shorter depending on the conditions of usage. (The rated lamp life is the average life of the lamps produced and tested, under the test con- ditions of our company , for a long term.
E – 47 3 Install the new lamp cartridge. q Install the new lamp cartridge in the direction as shown in the dra wing. Plug 4 Reinstall the lamp cover . q Inser t the lamp cov er until the catches fit in the groo ves . w Tighten the lamp cov er screw .
E – 48 Cleaning a Soiled Projector Main Unit * Wipe with a lint-free, soft, dry cloth. When very dir ty , wipe with a cloth that has been moistened with a diluted neutral detergent, then finish with a dr y cloth. If a chemically-treated cloth is going to be used, please f ollow an y written warnings.
E – 49 T able of Supported Fr equencies This projector automatically identifies the input signal from the personal computer and selects the optimum supported resolution from the table belo w . Note that a manual adjustment may be required depending on the input signal.
E – 50 Specifications Model Name HE-3200 Display Method Single Chip Digital Micromirror Device (DMD TM ) DMD Panel 0.7" 508,800 pixels (848 ⳯ 600) Lens Manual zoom, Man ual f ocus F=3.0 – 3.3 f=21.5 – 25.8mm Lamp 130W High P erf ormance Compact Lamp Image Size Min.
E – 51 Main Unit Exter nal View DVI-D RGB S-VIDEO VIDEO Y Pb/Cb Pr/Cr 91 mm / 3.6 inch 235 mm / 9.3 inch 174 mm / 6.9 inch 198 mm / 7.8 inch.
An important point after buying a device PLUS Vision PLUS Piano HE-3200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PLUS Vision PLUS Piano HE-3200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PLUS Vision PLUS Piano HE-3200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PLUS Vision PLUS Piano HE-3200 you will learn all the available features of the product, as well as information on its operation. The information that you get PLUS Vision PLUS Piano HE-3200 will certainly help you make a decision on the purchase.
If you already are a holder of PLUS Vision PLUS Piano HE-3200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PLUS Vision PLUS Piano HE-3200.
However, one of the most important roles played by the user manual is to help in solving problems with PLUS Vision PLUS Piano HE-3200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PLUS Vision PLUS Piano HE-3200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
