Instruction/ maintenance manual of the product 9100 Plinius
Go to page of 17
Stereo Integrated Amplifier.
2.
3 CONGRATULATIONS CONGRATULATIONS CONGRATULATIONS CONGRATULATIONS on your decision to become the proud owner of this Plinius 9100 Integrated Amplifier. This manual has been prepared to help you understand the operation of your amplifier, and to provide information about its design and the variety of ways it may be used.
4 Introduction .................................................................................................................. ................. Page 3 Precautions ....................................................................................
5 Please take special note of the following precautions before operating your new amplifier: • The Plinius 9100 Integrated Amplifier can deliver in excess of 120 watts into 8 ohms. This amplifier is also capable of a very large peak current delivery.
6 RECO RD SOURCE VOLUME xx x TUNER V CR T APE 1 TA P E 2 AUX CD The front of the Plinius 9100 Integrated Amplifier incorporates all the facilities you will require on a daily basis.
7 ON / OFF DESIGNED AND MANUFACTURED IN NEW ZEAL AND BY AUDI BLE T ECH NOL OG IES P.O . B O X PAL M E R ST O N N O R T H RIGHT CHAN NEL FUS ES LEFT CHAN NEL FUSE S SERIAL No.
8 TAPE OUTPUTS TAPE OUTPUTS TAPE OUTPUTS TAPE OUTPUTS These RCA outputs are situated next to the tape RCA inputs, and are provided to interface to a pair of line level recording devices. The position of the record selector on the front panel determines from which device a recording is being made.
9 PLACEMEN PLACEMEN PLACEMEN PLACEMENT AND VENTILATION T AND VENTILATION T AND VENTILATION T AND VENTILATION Your Plinius 9100 may operate at a moderately high temperature when being driven hard. The ideal location is upon a rigid stand, or floor mounted away from direct contact with any temperature sensitive materials or deep pile carpets.
10 It is important that you connect your loudspeakers (outputs) and source components (inputs) to the Plinius 9100 Integrated Amplifier correctly to ensure the amplifier is not damaged, and sounds its best with your system.
11 BI- BI- BI- BI-WIRING WIRING WIRING WIRING Bi-wiring uses two pairs of loudspeaker cables for each channel loudspeaker. You will notice that the rear panel of your Plinius 9100 has two pairs of output terminals for this purpose. When using bi-wires, always connect positive (+) to positive (+) and the same for the negative (-) terminals.
12 REMOTE CONTROL REMOTE CONTROL REMOTE CONTROL REMOTE CONTROL Provided with your Plinius 9100 is a three function remote control. The two buttons at the top of the remote adjust the volume level, and the button below switches the amplifier in and out of mute.
13 MAINS/LINE FUSE MAINS/LINE FUSE MAINS/LINE FUSE MAINS/LINE FUSE A Mains/Line fuse is fitted within the IEC socket on the rear of the amplifier. A small drawer at the bottom of this socket may be removed (after the IEC plug is removed) by levering it out with a flat blade screwdriver.
14 Your Plinius 9100 Integrated Amplifier is designed for use with high fidelity loudspeakers. It should not be used to operate with any other type of appliance or equipment. Choice of loudspeakers is one of personal taste, providing the chosen loudspeakers are suitable for use with your amplifier.
15 1 1 1 120-WATTS RMS PER 20-WATTS RMS PER 20-WATTS RMS PER 20-WATTS RMS PER CHANNEL INT CHANNEL INT CHANNEL INT CHANNEL INTO 8 OHMS. O 8 OHMS. O 8 OHMS.
16 Bi-wiring ...................................................................................................................... ................ Page 11 Date of Manufacture ..........................................................................
17 All operational, technical and descriptive material published here is subject to change at any time without notice. For further product information or queries, please contact us at the address below. PLINIUS PLINIUS PLINIUS PLINIUS products are designed and manufactured by: Audible Technologies Ltd.
An important point after buying a device Plinius Plinius 9100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Plinius Plinius 9100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Plinius Plinius 9100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Plinius Plinius 9100 you will learn all the available features of the product, as well as information on its operation. The information that you get Plinius Plinius 9100 will certainly help you make a decision on the purchase.
If you already are a holder of Plinius Plinius 9100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Plinius Plinius 9100.
However, one of the most important roles played by the user manual is to help in solving problems with Plinius Plinius 9100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Plinius Plinius 9100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
