Instruction/ maintenance manual of the product STK500 Atmel
Go to page of 2
The Atmel ® A VR STK500 is a starter kit and development system for Atmel’ s A VR ® Flash microcontr ollers. The STK500 gives designers a quick start to develop code on the A VR, combined with features for developing prototypes and testing new designs.
Supported Devices (4) S T AR TER K IT AND D EVELOPMENT S YSTEM STK500 ©Atmel Corporation, 2002 Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’ s standard warranty which is detailed in Atmel’ s T erms and Conditions located on the Company’ s web site.
An important point after buying a device Atmel STK500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Atmel STK500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Atmel STK500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Atmel STK500 you will learn all the available features of the product, as well as information on its operation. The information that you get Atmel STK500 will certainly help you make a decision on the purchase.
If you already are a holder of Atmel STK500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Atmel STK500.
However, one of the most important roles played by the user manual is to help in solving problems with Atmel STK500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Atmel STK500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
