Instruction/ maintenance manual of the product Diopsis 940HF Atmel
Go to page of 2
System Integration ARM core with 16+16 KB I&D caches and 48KB on chip SRAM Magic DSP with 370 KB on chip SRAM 10/100 Mbps Ethernet MAC Host & Device USB 2.0 Full Speed Timers, USAR T s, SPIs, TWIs, SSCs, MCI/SD, CANs Boot from Parallel Flash, SD or Serial Flash High Performance ARM9 ™ : 1.
1. Full Peripheral Set. 2. Some peripherals are not accessible by the user in this low-cost version. Reduced Peripheral Set = Full Peripheral Set - 2 CANs - 3 SSCs - 1 SPI - 1 TWI - 2 USART s. Consequently the r elated PIO lines can be used only as SW controlled PIO lines (not linked to any peripherals).
An important point after buying a device Atmel Diopsis 940HF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Atmel Diopsis 940HF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Atmel Diopsis 940HF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Atmel Diopsis 940HF you will learn all the available features of the product, as well as information on its operation. The information that you get Atmel Diopsis 940HF will certainly help you make a decision on the purchase.
If you already are a holder of Atmel Diopsis 940HF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Atmel Diopsis 940HF.
However, one of the most important roles played by the user manual is to help in solving problems with Atmel Diopsis 940HF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Atmel Diopsis 940HF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
