Instruction/ maintenance manual of the product AT91CAP7A-STK Atmel
Go to page of 2
The CAP™ Starter Kit is the ideal vehicle for low-cost, no-risk evaluation of the customization capabilities of Atmel’ s CAP microcontroller . It is intended to familiarize the user with the CAP c.
CAP Starter Kit Development T ools The CAP Starter Kit is supplied with an essential set of development tools in order to get started immediately . These include: n Instructions for downloading IAR™.
An important point after buying a device Atmel AT91CAP7A-STK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Atmel AT91CAP7A-STK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Atmel AT91CAP7A-STK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Atmel AT91CAP7A-STK you will learn all the available features of the product, as well as information on its operation. The information that you get Atmel AT91CAP7A-STK will certainly help you make a decision on the purchase.
If you already are a holder of Atmel AT91CAP7A-STK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Atmel AT91CAP7A-STK.
However, one of the most important roles played by the user manual is to help in solving problems with Atmel AT91CAP7A-STK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Atmel AT91CAP7A-STK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
