Instruction/ maintenance manual of the product GSD-1020 Planet
Go to page of 12
10/100/1000Mbps Gigabit / Fast Ethernet Switch GSD-1020 User’s Manual.
Trademarks Copyright PLANET Technology Corp. 2002. Contents subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp.
TABLE OF CONTENTS 1. INTRODUCTION ................................................................................................................ ...........1 1.1 C HECKLIST ............................................................................
- 1 - 1. INTRODUCTION 1.1 Checklist Check the contents of your package for following parts: GSD-1020 User's manual Power cord If any of these pieces are missing or damaged, please con.
- 2 - 2. HARDWARE DESCRIPTION This section describes the hardware features of t he Giga Switch. For easier management and control of the switch, familiarize yourself with its display indicators , and ports. Front panel illustrations in this chapter display the unit LED indicators.
- 3 - 1000Base-T 2.2 Rear Panel The rear panel of the Switch indicates an AC inlet power socket which accepts input power from 100 to 240VAC, 50-60Hz. Figure 2: GSD-1020 Sw itch rear panel Power Notice: 1. The device is a power-required device, it means, it will not work till it is powered.
- 4 - 3. INSTALLATION 3.1 Before start up Before your installation, please refer to the followings for your cabling: 100Base-TX All 100Base-TX ports come with auto-negotiation c apability.
- 5 - Figure 3. End node, Hub or Switch connection Notice: Cable distance for Sw itch The cable distance between Ethernet Switch and hub/PC should not exceed 100 meter for UTP/STP cable. Make sure the w iring is correct It can be used Category 3/4/5 cable in 10 Mbps oper ation.
- 6 - 4. SWITCH OPERATION Address Table The Giga Switch is implemented with an address table. This address table composed of many entries. Each entry is used to store the address information of so me node in network, including MAC address, port no, etc.
- 7 - 5. TROUBLESHOOTING This chapter contains information to help you solve pr oblems. If Giga Switch is not functioning properly, make sure the Ethernet Switch was set up according to instructions in this manual.
- 8 - APPENDIX A NETWORKING CONNECTION A.1 Switch‘s RJ-45 Pin Assignments 1000Mbps / 1000BaseT Contact MDI MDI-X 1 BI_DA+ BI_DB+ 2 BI_DA- BI_DB- 3 BI_DB+ BI_DA+ 4 BI_DC+ BI_DD+ 5 BI_DC- BI_DD- 6 BI_.
- 9 - APPENDIX B TECHNICAL SPECIFICATIONS GSD-1020 10/100/1000Mbps Gigabit Fast Ethernet Switch Hardw are Specification Ports Eight 10/ 100Base-TX , two 1000Base-T RJ-45 Auto-MDI/MDI-X ports Switch Fabric 5.6Gbps Switch Processing Scheme Store-and-forward Throughput (packet per second) 4.
An important point after buying a device Planet GSD-1020 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Planet GSD-1020 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Planet GSD-1020 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Planet GSD-1020 you will learn all the available features of the product, as well as information on its operation. The information that you get Planet GSD-1020 will certainly help you make a decision on the purchase.
If you already are a holder of Planet GSD-1020, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Planet GSD-1020.
However, one of the most important roles played by the user manual is to help in solving problems with Planet GSD-1020. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Planet GSD-1020 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
