Instruction/ maintenance manual of the product AT88SC6416CRF Atmel
Go to page of 2
Key Features • A Family of Devices with User Memories from 1 Kbit to 64 Kbits: 1K, 2K, 4K, 8K, 16K, 32K, 64K Bits • Symmetrical Dynamic Mutual Authentication with 64-bit Cryptographic Keys • Enc.
Product Featur es • Contactless 13.56 MHz RF Communications Interface – ISO/IEC 14443-2: 2001 T ype B Compliant – ISO/IEC 14443-3: 2001 T ype B Compliant Anticollision Protocol – Command Set O.
An important point after buying a device Atmel AT88SC6416CRF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Atmel AT88SC6416CRF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Atmel AT88SC6416CRF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Atmel AT88SC6416CRF you will learn all the available features of the product, as well as information on its operation. The information that you get Atmel AT88SC6416CRF will certainly help you make a decision on the purchase.
If you already are a holder of Atmel AT88SC6416CRF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Atmel AT88SC6416CRF.
However, one of the most important roles played by the user manual is to help in solving problems with Atmel AT88SC6416CRF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Atmel AT88SC6416CRF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
