Instruction/ maintenance manual of the product PS5580 Planar
Go to page of 21
Plan ar PS5580 RS232 and LAN Comm and Protocol.
Copyright © 4 F eb 2014 by Plan ar Systems, Inc. All rights reserved. Contents of this publication may not be reproduced in any form without permission of Plan ar Sys tem s, I nc. T rademark Credits Windows™ is a trademark of Microsof t Corp. All other names ar e trademarks or r egister ed tradem arks of their respective co mpanies.
PS5580 RS232 and LAN Command Protocol T able of Contents Co mmand Protoc ol Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Command Protocol . . . . .
Command Protocol PS5580 RS232 and LAN Command Protocol 1 Comm and Protocol Description This document specifies the prot ocol s used on the PS55 80 RS232 and LAN connectors. Comm and Protocol Comm unications Link Communication between the host and the dis pla y can be either a standard RS232 connection or a standard LAN connection.
Broadcast Command Format PS5580 RS232 and LAN Command Protocol 2 Definition of terms in Directly Addressed Command F ormat table: • ST X is the ascii ST X charac ter (0x02). • Command is the command code . • Le ng t h is the number of bytes in the Grou p ID , Multi ID , Mode and Data fields.
Command / Response Examples PS5580 RS232 and LAN Command Protocol 3 Example: Set powe r to off (G r oup ID = B, Multi ID = 1) Example: Set power to off (broadcast) ST X CMD LEN GID MID MOD DA T CHK ET.
PS5580 RS232 and LAN Command Protocol 4 Comm ands Suppor ted in the PS5580 Display Name Command Broad cast Supported Read/Write Len gt h Len gt h (B ro ad c as t Mode Data Bytes Response Length Respon.
PS5580 RS232 and LAN Command Protocol 5 Color Spa ce Configuration 0xB4 Y W 4 3 0x02 = Write Byte 1: Color Space - 0x00 = Auto - 0x01 = RGB PC - 0x02 = RGB Video 4 Byte 1: C olor Spac e - 0x00 = Auto .
PS5580 RS232 and LAN Command Protocol 6 Get F irmw are Ve r s i o n 0xF9 N R 3 N/A 0x00 = Read [None] 19 Bytes 1-2: Scaler Firm ware Y ear (last two digits) Bytes 3-4: Scaler Firmware Month (two digit.
PS5580 RS232 and LAN Command Protocol 7 Get L CD Status 0x87 N R 3 N/A 0x00 = Read [None] 12 Byte 1: P ower Stat us - 0x00 = Off - 0x01 = On Byte 2: In put Sourc e - 0x01 = DisplayP ort - 0x02 = HDMI .
PS5580 RS232 and LAN Command Protocol 8 Get Model Na me and Seria l Number 0xB9 N R 3 N/A 0x00 = Read [None ] 25 Bytes 1-9: Model N ame Bytes 10-22: Serial Num ber Model Name = PS5580 Serial Number = .
PS5580 RS232 and LAN Command Protocol 9 Get P icture Contro l D ata 0x90 N R 3 N/A 0x00 = R ead [None] 24 Byte 1: In put Sourc e - 0x01 = DisplayP ort - 0x02 = HDMI 1 - 0x03 = HDMI 2 - 0x04 = DVI - 0x.
PS5580 RS232 and LAN Command Protocol 10 ID Configuration 0xFF N W 5 N/A 0x02 = Write Byte 1: Group ID (Range 0x01-0x FF) Byte 2: Multi ID (Range 0x01-0x FF) 5 Byte 1: Group ID (Range 0x01-0xFF) Byte .
PS5580 RS232 and LAN Command Protocol 11 Inp ut Sou rc e HDMI 2 with Mu lti Sc ale 0xD3 N W 7 N/A 0x02 = Write Byte 1: Number of Horizon tal Monito rs Byte 2: Number of Ver t ic al M o n i t o r s Byt.
PS5580 RS232 and LAN Command Protocol 12 IR Lock Configuration 0xB2 Y W 4 3 0x02 = Write Byte 1: IR Lock - 0x00 = Lock disabled - 0x01 = Lock enable d 4 Byte 1: IR Lock - 0x00 = Lock disabled - 0x01 =.
PS5580 RS232 and LAN Command Protocol 13 OSD V Position 0x7 F Y W 4 3 0x02 = Write Byte 1: V Position (Range 0x00 -0x64) 4 Byte 1: V Position (Range 0x00-0x64) Write 5 0 ( 0x3 2) : Command: 02 7F 04 0.
PS5580 RS232 and LAN Command Protocol 14 Scre en V P osit ion 0x37 Y W 4 3 0x02 = Write Byte 1: V Position (Range 0x00 -0x64) 4 Byte 1: V Position (Range 0x00-0x64) Write 5 0 ( 0x3 2) : Command : 02 3.
PS5580 RS232 and LAN Command Protocol 15 White Balance Contro l: Blue O ffse t 0xC2 N W 5 N/A 0x02 = Write Byte 1: Input Source - 0x01 = DisplayPort - 0x02 = HDMI 1 - 0x03 = HDMI 2 - 0x04 = DVI - 0x05.
PS5580 RS232 and LAN Command Protocol 16 White Balance Contro l: Red Gai n 0xBC N W 5 N/A 0x02 = Write Byte 1: Input Source - 0x01 = DisplayPort - 0x02 = HDMI 1 - 0x03 = HDMI 2 - 0x04 = DVI - 0x05 = P.
PS5580 RS232 and LAN Command Protocol 17 Notes for C ommands T able Note # Note T ext 1 The response is f ollowed b y a response in the same format as the IP address r esponse, including the IP address c ommand byte . 2 See table below for Response val ues.
PS5580 RS232 and LAN Command Protocol 18 The follo wing table lists the val ues for the Resolution data byte in the Get L CD Status response. Get L CD Status Response Resolution Value Resolution V alu.
An important point after buying a device Planar PS5580 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Planar PS5580 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Planar PS5580 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Planar PS5580 you will learn all the available features of the product, as well as information on its operation. The information that you get Planar PS5580 will certainly help you make a decision on the purchase.
If you already are a holder of Planar PS5580, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Planar PS5580.
However, one of the most important roles played by the user manual is to help in solving problems with Planar PS5580. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Planar PS5580 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
