Instruction/ maintenance manual of the product PE170 Planar
Go to page of 12
PLANAR LCD MONITOR PE170 MANUAL www.planar.com.
Table of Contents Table of Contents ................................................................................. 1 Preface ....................................................................................................... 2 Chapter 1 Installation .
Preface This manual i s designed to assist users in set ting up and using the LCD Monit or. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The inform ation in this docum ent is subject to change wi thout notice.
Chapter 1 Installation Unpacking Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space around it for sufficient airflow.
Connecting the Display 1. Power off your com puter. 2. Connect one end of the signal cable to the LCD Monitor’s VGA port.(See Fig 1-5) 3. Connect the other end of the signal cable to the VGA port on your PC.
Chapter 2 Display Controls User Controls A brief description and the l ocation of all LCD M onitor function controls and indicators: Figure 2-1 1 DC Power Switch Press the power switch to switch th e monitor ON/OFF. 2 DC Power-On Indicator LED lights Green color --- Power is ON.
Function Description Ico n Function Function Description Brightness 101 scales of brightness are available t o choose from (0 to 100). Contrast 101 scales of contrast are available t o choose from (0 to 100). H. Position This function let 's you adjust the displ ay's horiz ontal position V.
Icon Function Description 9300 C IE coordinated Color Temperat ure of 9300°K Sets the CIE coordinate color temperature to 9300°K 7500 C IE coordinated Color Temperat ure of 7500°K Sets the CIE coor.
Chapter 3 Technical Information Specifications LCD Panel Size 17" (43 cm) Display Type Active matrix color TFT LCD Resolution 1280 x 1024 Display Dot 1280 x (RGB) x 1024 Display Area (mm) 337.
Plug & Play Supports VESA DDC1 and DDC2B functions External Connection Power Input (AC input) AC socke t Video Cable 1.8M with 15- p in D-sub connecto r Environment Operating Condition: Temperatur.
10 Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor w ill use the most suitable available timing. Resolution H. Freq. (KHz) V. Freq. (Hz) Pixel Freq. (MHz) H/V Sync. Polarity Mode 640 x 350 31.469 70.087 25.
3ODQDU6 V WHPV,Q F Customer Service E-mail: desktopmonitors@planar .com T el: 1-866-PLANAR-1 (1-866-752-6271) Hours: M- F , 8am - 9pm Eastern T ime © 2003 Planar Systems, Inc. 05/03 Planar is a registered trademark of Planar Systems, Inc.
An important point after buying a device Planar PE170 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Planar PE170 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Planar PE170 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Planar PE170 you will learn all the available features of the product, as well as information on its operation. The information that you get Planar PE170 will certainly help you make a decision on the purchase.
If you already are a holder of Planar PE170, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Planar PE170.
However, one of the most important roles played by the user manual is to help in solving problems with Planar PE170. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Planar PE170 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
