Instruction/ maintenance manual of the product PE14D Pitco
Go to page of 12
L80-045 Re v 0 (11/07) IMPORTANT FOR FUTURE R EFERENCE Please complete this information and retain these instructions for the life of the equipment: Model #: _____________ ___________ __ Serial #: ___.
L80-045 Re v0 (11/ 07) 2 Tool required to perform this upgrade: 5/32” Allen Key 5/16” Sock et, Nut Driver, or Wrench 3/8” Wrench 1/2” Wrench 3/4” Wrench 7/8” Wrench 13/16” Wrench 1 1/4.
L80-045 Re v0 (11/ 07) 3 Ensure kit is complete. Part number B8702901-CL. 1. Qty.1 B3615401-C Bezel 2. Qty.3 PP10911 Fitting 3. Qty.1 A8017902-C Bracket 4. Qty.1 PP10830 Fitting 5. Qty.1 A1826101-C Bracket 6. Qty.1 PP10944 Knob 7. Qty.1 PP10726 Check Valve 8.
L80-045 Re v0 (11/ 07) 4 15. Qty.1 L80045 Instruction Manual Exploded Part view.
L80-045 Re v0 (11/ 07) 5 1. From the back, remove the eight 5/16” screws that hold the rear cover on. 2. With the rear of the tank exposed, rem ove the fill port plug with a 1/2” in wrench. Then remove the reducer with a 7/8” wrench. S ave the reducer, as it will be reused.
L80-045 Re v0 (11/ 07) 6 4. Apply Teflon tape to the 90° comp ression fitting (PP109 11) and install. Make sure the fitting is at the 3 o’clock position when fully tightened. 5. Apply the compression fitting (PP10830) to the front end of the fill piping (A8017501) before insta ll.
L80-045 Re v0 (11/ 07) 7 7. Apply Teflon tape to the rear fitting of the supply piping. Install the check valve (PP10726) onto the rear fitting of the supply piping with the support bracket (A1826101-C) be tween the valve and fitting. 8. Install the supply piping assembly from the front.
L80-045 Re v0 (11/ 07) 8 9. From the front of the unit, remove th e four Allen head screws with a 5/32” Allen Key. Unplug the comput er and set front panel assembly aside. Remove the heat shie ld via three 5/16” screws. 10. With the heat shield removed remove the no fill option cover plate.
L80-045 Re v0 (11/ 07) 9 11. Apply Teflon tape the NPT ends of the fitting bodies removed earlier. Assemble the fittings with fill valve (PP10945). Add the knob extension to the assembly and install. Make sure the flat side of the “D” shaft faces the 90° fitting.
L80-045 Re v0 (11/ 07) 10 14. Apply the new manual fill option overl ay (A6066901) to the new manual fill option bezel (B3615401-C). With a 3/ 8” wrench, remove the four kep nuts that hold the controller to the original bezel and install it onto the new bezel using the original hardware.
L80-045 Re v0 (11/ 07) 11 THIS PAGE LEFT INTE NTIONALLY BLANK.
L80-045 Re v0 (11/ 07) 12 In t he event of pr oblems w it h or questi ons about y our order, please contac t t he Pitco Fr ialat or f act ory at (800)258-3708 US and Canada only (603)225- 6684 W orl d.
An important point after buying a device Pitco PE14D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pitco PE14D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pitco PE14D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pitco PE14D you will learn all the available features of the product, as well as information on its operation. The information that you get Pitco PE14D will certainly help you make a decision on the purchase.
If you already are a holder of Pitco PE14D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pitco PE14D.
However, one of the most important roles played by the user manual is to help in solving problems with Pitco PE14D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pitco PE14D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
