Instruction/ maintenance manual of the product B2005304 SSTC Pitco Frialator
Go to page of 4
L20-314 Rev 0 (9/7/07) English This control was developed by Pitco to replace bulb and capillary thermostats in fry er applications. It utilizes the la test in microprocessor technolog y and allows a host of features not practical with a simple capillary t-stat.
Solid State Temperature Control (SSTC) L20-314 Rev 0 (9/7/07) Page 2 1 Switch and Indicator Locations and Function: On / Off switch: Turns the control on or off.
Solid State Temperature Control (SSTC) Page 3 L20-314 (9/7/07) 2 Operation: 2.1 Turn the appliance ON: Place the melt switch in the desired position, typically Melt . No melt may also be selected only if vat is filled with liquid cooking oil. Turn the control ON by pressing the rocker switch to the “1” p osition.
Solid State Temperature Control (SSTC) L20-314 (9/7/07) Page 4 3 Fault Detection 3.1 High Limit Trip or “Heat Failure”: This control monitors the appliance response to heat demand signals. Under normal condition s the heat feed back indicator follows the heat demand indicator.
An important point after buying a device Pitco Frialator B2005304 SSTC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pitco Frialator B2005304 SSTC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pitco Frialator B2005304 SSTC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pitco Frialator B2005304 SSTC you will learn all the available features of the product, as well as information on its operation. The information that you get Pitco Frialator B2005304 SSTC will certainly help you make a decision on the purchase.
If you already are a holder of Pitco Frialator B2005304 SSTC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pitco Frialator B2005304 SSTC.
However, one of the most important roles played by the user manual is to help in solving problems with Pitco Frialator B2005304 SSTC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pitco Frialator B2005304 SSTC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
