Instruction/ maintenance manual of the product DRM-604X Pioneer
Go to page of 66
Pioneer New Media T echnologies, Inc. DRM-602X and DRM-604X CD-ROM Changers Softwar e Driv er Installation Guide Owner’ s Manual.
Owner’ s Manual / Softwar e Driver Installation Guide i TRADEMARKS T rademarked names appear throughout this manual. Rather than list the names and entities that o wn the trademarks or insert a trad.
License Agreement ii Softwar e Driver Installation Guide / Owner’ s Manual License Agreement PIONEER ELECTRONIC CORPORATION SOFTWARE LICENSE AGREEMENT I.
License Agreement Owner’ s Manual / Softwar e Driver Installation Guide iii License Agreement (cont.) lease or transfer them to another user except as part of the permanent transfer (as provided abo ve) of all softw are and written materials.
iv Softwar e Driver Installation Guide / Owner’ s Manual Limited W arranty Limited W arranty Pioneer Electronics Corp, Inc. warrants that : • The software will perform substantially in accordance with the accompanying written materials for a period of ninety (90) days from the date of receipt.
Owner’ s Manual / Softwar e Driver Installation Guide v NO LIABILITY FOR CONSEQUENTIAL D AMA GES “IN NO EVENT WILL APPLE COMPUTER, INC. OR PEC OR THEIR DIRECTORS, OFFICERS, EMPLO YEES, OR A GENTS .
T able of Contents Owner’ s Manual / Softwar e Driver Installation Guide vi T able of Contents 1. INTRODUCTION ...........................................................................1 - 1 Set-Up and Driver Installation Overview .................
T able of Contents vii Softwar e Driver Installation Guide / Owner’ s Manual T able of Contents (cont.) 5. SPECIAL ISSUES FOR IBM-PC & COMP A TIBLE USERS .........5 - 1 Third Party Device Drivers .................................................
List of F igures Owner’ s Manual / Softwar e Driver Installation Guide viii List of Figures Figure 1 – DOS/WINDOWS Installer: Accessing On-Line Help ...........2 - 2 Figure 2 – DOS/WINDOWS Installer: On-Line Help Screen ................2 - 2 Figure 3 – DOS/WINDOWS - Quick Install Process .
Chapter 1 Introduction Owner’ s Manual / Softwar e Driver Installation Guide 1-1 Introduction Congratulations on the purchase of your ne w Pioneer CD-R OM Changer! The unit is packaged with floppy d.
Introduction Chapter 1 1-2 Softwar e Driver Installation Guide / Owner’ s Manual *********************************** IBM PC/XT/A T/386 User’s , refer to the Chapter 3 for installation instructions. Macintosh User’ s , refer to Chapter 4 for installation instructions.
Chapter 2 Pre-Installation Owner’ s Manual / Softwar e Driver Installation Guide 2-1 Pre-Installation Notes Back Up Diskettes The license agreement that is enclosed with your Pioneer product allo ws you to make a backup of the dri ver diskettes, in case your originals become lost, damaged or corrupted.
Pre-Installation Notes Chapter 2 2-2 Softwar e Driver Installation Guide / Owner’ s Manual On-Line Help for IBM-PC & Compatible INST ALLA TION The Pioneer IBM-PC DOS/WINDO WS installation software has an On-Line Help feature av ailable from all of the installation menus.
Selection methods for IBM-PC & compatible users The table belo w indicates ho w to select/deselect menu options and ho w to mo v e around in the installation screens when installing the IBM-PC DOS.
Pre-Installation Chapter 2 2-4 Softwar e Driver Installation Guide / Owner’ s Manual Characteristic Comment / Definition and/or Key Bold Type Bold type represents a command which you must type. To carry out a command, type the bold-faced word(s) then press [ENTER].
Chapter 3 IBM DOS / WINDO WS Driver Installation Owner’ s Manual / Softwar e Driver Installation Guide 3-1 DOS /WINDOWS device driver installation Inspection Checklist / PC Pioneer Changers are packaged with a floppy disk containing software de vice dri vers and the MSCDEX f ile for IBM-PC and compatible computers.
Chapter 3 IBM DOS / WINDO WS Driver Installation 3-2 Softwar e Driver Installation Guide / Owner’ s Manual Quick Installation Installing software dri vers so you can use your Pioneer CD-R Om Changer with your computer is easy! This flo w chart details the installation process.
IBM DOS / WINDO WS Driver Installation Chapter 3 Owner’ s Manual / Softwar e Driver Installation Guide 3-3 Click on QUICK INST ALL to bring up the QUICK INST ALL Parameters.
Chapter 3 IBM DOS / WINDO WS Driver Installation 3-4 Softwar e Driver Installation Guide / Owner’ s Manual These default settings are suitable for most computer conf igurations. If you need to change the settings, refer to the QUICK INST ALL Parameters on page 3-5.
IBM DOS / WINDO WS Driver Installation Chapter 3 Owner’ s Manual / Softwar e Driver Installation Guide 3-5 accept the default selection or Press [F3] to bring up the adjacent menu that allo ws you to select a dif ferent host adapter . Use the UP or DO WN arrow ke ys, or a mouse to indicate the kind of SCSI host adapter you are using.
Chapter 3 IBM DOS / WINDO WS Driver Installation 1 3-6 Softwar e Driver Installation Guide / Owner’ s Manual T o accept the QUICK INST ALL Parameters press the [ENTER] ke y from anywhere in the menu, or click on <ENTER>-Accept in the lo wer right corner of the menu.
IBM DOS / WINDO WS Driver Installation Chapter 3 Owner’ s Manual / Softwar e Driver Installation Guide 3-7 selection and press [ENTER]. This Completes the Quick Installation Note: If you choose CUST.
Chapter 3 IBM DOS / WINDO WS Driver Installation 3-8 Softwar e Driver Installation Guide / Owner’ s Manual Using Y our Pioneer CD-ROM Changer Y ou are now ready to use the Pioneer CD-R OM Changer connected to your computer system. For use under DOS follo w the instructions shown on the left side of the chart.
IBM DOS / WINDO WS Driver Installation Chapter 3 Owner’ s Manual / Softwar e Driver Installation Guide 3-9 Custom Installation Options Select CUSTOM INST ALL if you are installing two Pioneer Change.
Chapter 3 IBM DOS / WINDO WS Driver Installation 3-10 Softwar e Driver Installation Guide / Owner’ s Manual Device Driver Parameters MSCDEX Device Name This is the label that will be declared in both the MSCDEX De vice Dri ver line in the A UTOEXEC.
IBM DOS / WINDO WS Driver Installation Chapter 3 Owner’ s Manual / Softwar e Driver Installation Guide 3-11 MSCDEX Parameters CD-ROM starting drive letter This option allo ws you to indicate any let.
Chapter 3 IBM DOS / WINDO WS Driver Installation SCSI ID Parameters SCSI ID of Drive This indicates the the SCSI ID of the first dri ve. (0-6). NO TE: Make sure t he SCSI ID number entered here matches the number set on the back of the Changer .
IBM DOS / WINDO WS Driver Installation Chapter 3 Owner’ s Manual / Softwar e Driver Installation Guide 3-13 Notice – Changes Not Saved This dialog box will appear whene ver you select Custom Install, change some of the parameter settings, and then decide not to sav e them.
Chapter 3 IBM DOS / WINDO WS Driver Installation 3-14 Softwar e Driver Installation Guide / Owner’ s Manual Installing Three Pioneer CD-ROM Changers on one SCSI Chain Three or more Changers can be installed on one SCSI chain by editing the Pioneer De vice Dri ver line in the CONFIG.
IBM DOS / WINDO WS Driver Installation Chapter 3 Owner’ s Manual / Softwar e Driver Installation Guide 3-15 Using XDisc (cont.) Then, acti v ate XDISC by typing C:PIONEERXDISC . Once XDISC is launched, type XDISC (space) E (space) 3 to access the third disc in the changer assigned dri v e letter “E”.
Chapter 3 IBM DOS / WINDO WS Driver Installation 3-16 Softwar e Driver Installation Guide / Owner’ s Manual Calling MPC within Windows This program can also be used in W indows. Run the Program Manager and open the MS-DOS Prompt icon. Read instructions and press <AL T+ENTER> to open a DOS windo w within W indows.
Macintosh Driver Installation Inspection Checklist / Installation Overview Insert the 3.5” PIONEER Macintosh diskette that ships with the Pioneer CD-R OM Changer into the floppy dri ve of your Macintosh Computer . Double click on the PIONEER diskette icon.
Figure 18 - MACINTOSH - System 7.0 and above QUICK INSTALL NOTE: Updates to the drivers may mean that different files will be on the diskette you receive with your Pioneer CD-ROM Drive. You can download the most recent version of the Macintosh Drivers, file CDROMXX.
Using the Installer with System 7.0 and Above Launch the installer that ships with the diskette to automatically install the dri v ers and files that are needed by the Macintosh to comm unicate with the Pioneer CD-R OM Changer .
MA CINTOSH Driver Installation Chapter 4 4-4 Softwar e Driver Installation Guide / Owner’ s Manual This is the message you will see when installation is completed successfully: Click on QUIT , to lea ve the installer .
MA CINTOSH Driver Installation Chapter 4 Owner’ s Manual / Softwar e Driver Installation Guide 4-5 Operations Check Other Installation Options If you ar installing more than one SCSI De vice , make .
Chapter 4 MA CINTOSH Driver Installation 4-6 Softwar e Driver Installation Guide / Owner’ s Manual Using CLD Access CLD Access is a control panel document. Select Control Panels from under the Apple Menu, then double click on CLD Access or go into the System F older and open Control P anels F older , then double click on CLD Access to launch it.
Using CLD Remote There is one utility program included with the Macintosh Pioneer CD-R OM driv ers. This is CLD Remote, a remote control program for the Macintosh that can be used to control CD Audio discs.
Chapter 4 MA CINTOSH Driver Installation 4-8 Softwar e Driver Installation Guide / Owner’ s Manual Descriptions of CLD REMO TE indicators and control panel (continued) E — These are the control buttons.
Special Issues for IBM-PC & Compatible Users These are some special issues that may be encountered with IBM-PC & compatible computers when connecting a Pioneer CD-R OM Changer: Third Party Device Drivers A number of third party de vice dri vers are av ailable for different operating systems.
About AUDIO on CD-ROMs There are three types of Audio that you will find on CD-R OM discs: • CD-D A Compact Disc Digital Audio (Conforms to the Red Book Standard) • Compressed Audio (ADPCM, Adapti ve Pulse Code Modulation). Conforms to the Y ellow Book Standard and is found on CD-R OM discs.
Using CD Player (CDP) commands to control the drive After installing the proper de vice dri ver , the /C:CDP switch should be found in the De vice line of the CONFIG.
Questions and Answers Here are some common questions asked about Pioneer CD-R OM Changers. Can I use my Pioneer CD-ROM Changer on a network? There are many third party dri vers av ailable for networking a Pioneer CD-R OM Changer . Order Pioneer LaserF acts System document number 34 024 and 34 025.
supports before you purchase a CD-R OM disc that includes compressed audio. What should I do if th e CD-ROM Changer always inserts the first or the same disc, no matter which disc the software has been instructed to use? The software package was probably written to w ork with a single CD-R OM Dri ve.
A ppendix A T roubleshooting IBM- PC DOS / WINDO WS Installation Owner’ s Manual / Softwar e Driver Installation Guide A-1 T roubleshooting IBM-PC DOS/WINDOWS Installation If the Pioneer CD-R OM Cha.
T roubleshooting IBM- PC DOS / WINDO WS Installation A ppendix A A-2 Softwar e Driver Installation Guide / Owner’ s Manual SCSI inter face card can’t communicate with drive This means the device driver was not able to locate the proper SCSI inter face card in the PC.
A ppendix A T roubleshooting IBM- PC DOS / WINDO WS Installation Owner’ s Manual / Softwar e Driver Installation Guide A-3 SCSI inter face card can’t communicate with drive This means the device driver was not able to locate the proper SCSI inter face card in the PC.
T roubleshooting IBM- PC DOS / WINDO WS Installation A ppendix A A-4 Softwar e Driver Installation Guide / Owner’ s Manual T ime out during selection phase This means the driver could not locate the Changer on the SCSI bus. The device driver was, however , able to locate the inter face card.
A ppendix A T roubleshooting IBM- PC DOS / WINDO WS Installation Owner’ s Manual / Softwar e Driver Installation Guide A-5 T ime out waiting for initial bus free phase, status phase or data phase This means you have some kind of problem with the SCSI cable or a problem with ter mination.
T roubleshooting IBM- PC DOS / WINDO WS Installation A ppendix A A-6 Softwar e Driver Installation Guide / Owner’ s Manual The Inquiry ID=0 line is blank This means that the device driver located a inter face card which appeared to be a Future Domain inter face card, but was not.
A ppendix A T roubleshooting IBM- PC DOS / WINDO WS Installation Owner’ s Manual / Softwar e Driver Installation Guide A-7 CDR101 Not ready reading drive D This means the drive has failed to read the disc. 1. V erify that discs ar e in the player label side down.
T roubleshooting IBM- PC DOS / WINDO WS Installation A ppendix A A-8 Softwar e Driver Installation Guide / Owner’ s Manual CDR 103 Disc is not ISO 9660 or High Sierra This means the disc is probably not a High Sierra or ISO 9660 for mat. Either High Sierra or ISO 9660 is required to work with Microsoft Extensions (MSCDEX).
A ppendix A T roubleshooting IBM- PC DOS / WINDO WS Installation Owner’ s Manual / Softwar e Driver Installation Guide A-9 Incorrect DOS version This means the the version of DOS you are using is incompatible with the version of MSCDEX installed. 2.
T roubleshooting IBM- PC DOS / WINDO WS Installation A ppendix A A-10 Softwar e Driver Installation Guide / Owner’ s Manual Cartridge will not eject from the Changer 1. There are two possible causes of this symptom. One is that the software has locked the magazine into the machine and will not let the user eject it.
A ppendix A T roubleshooting IBM- PC DOS / WINDO WS Installation Owner’ s Manual / Softwar e Driver Installation Guide A-11 BUSY light Flashes at one-second intervals 1. This is a visual indicator from the drive that something is wrong with the drive, affecting its ability to per for m.
A ppendix B T roubleshooting Macintosh Driver Installation Owner’ s Manual / Softwar e Driver Installation Guide B-1 T roublshooting Macintosh Driver Installation If you hav e trouble using the Pioneer CD-R OM Changer after you ha ve installed the dri vers, please check these points: 1.
A ppendix C DOS/WINDO WS Device Driver & MSCDEX F ile Owner’ s Manual / Softwar e Driver Installation Guide C-1 Installation Overview for IBM-PC & Compatibles Device Driver & MSCDEX File The INST ALL program adds a line to the CONFIG.
DOS/WINDO WS Device Driver & MSCDEX F ile A ppendix C C-2 Softwar e Driver Installation Guide / Owner’ s Manual NO TE: The /N: switch (indicating the number of discs to access within the changer.
A ppendix C DOS/WINDO WS Device Driver & MSCDEX F ile Owner’ s Manual / Softwar e Driver Installation Guide C-3 Device Driver command line switches: Switch Description Example /D:(device name) Specifies the device name of the /D:MSCD000 CD-ROM device.
DOS/WINDO WS Device Driver & MSCDEX F ile A ppendix C C-4 Softwar e Driver Installation Guide / Owner’ s Manual Modifications to the AUTOEXEC.BA T file The INST ALL Program also modif ies or creates an A UTOEXEC.B A T file to add an instruction that tells DOS to in voke the MSCDEX.
A ppendix D (CDP) CD Player Commands Owner’ s Manual / Softwar e Driver Installation Guide D-1 Using CDP Commands / CDP Command List For Pioneer CD-ROM Changers S ending CDP (CD Player) Commands fro.
(CDP) CD Player Commands A ppendix D D-2 Softwar e Driver Installation Guide / Owner’ s Manual The follo wing lists the C ommand M nemonics and an explanation for each: CM Command Drive Action ?A Address Request Returns a 10-digit string (TTIIMMSSFF) representing Track number, Index number, and P-code time for the current address.
A ppendix D (CDP) CD Player Commands Owner’ s Manual / Softwar e Driver Installation Guide D-3 CM Command Drive Action n KL Key Lock Enables or disables the front panel eject button. n = 0: Enabled. n = 1: Disabled LO Lead Out Lead Out Adress NF Scan Forward Scans forward about 15 seconds; audio attenuated by 12 dB.
(CDP) CD Player Commands A ppendix D D-4 Softwar e Driver Installation Guide / Owner’ s Manual CM Command Drive Action a SM Stop Marker Sets a stop marker at address a . When the stop marker is reached, the drive enters Pause mode. Stop markers are cleared by CL and RJ commands.
Comand Error Messages Return Error Explanation R (GOOD) The command completed successfully. E00 Communication Error Error in command, command too long E04 Feature not Available Unusable command, wrong.
A ppendix E PIONEER LaserF acts System Owner’ s Manual / Softwar e Driver Installation Guide E-1 Pioneer LaserFacts SM System Pioneer Ne w Media T echnologies, Inc., has placed a full library of technical resource materials on a Pioneer LaserF acts System.
An important point after buying a device Pioneer DRM-604X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pioneer DRM-604X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pioneer DRM-604X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pioneer DRM-604X you will learn all the available features of the product, as well as information on its operation. The information that you get Pioneer DRM-604X will certainly help you make a decision on the purchase.
If you already are a holder of Pioneer DRM-604X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pioneer DRM-604X.
However, one of the most important roles played by the user manual is to help in solving problems with Pioneer DRM-604X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pioneer DRM-604X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
