Instruction/ maintenance manual of the product DJM-900SRT Pioneer
Go to page of 32
DJ MIXER DJM-900SRT DJM-900SRT Serato DJ Edition Operating Instructions http://pioneerdj.com/support/ The Pi oneer DJ support site shown above offers FA Qs, information on so ft ware and various other types of information and se rv ices to allow you to use your product in greater comfort.
2 En Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished read - ing the instructions, put them away in a safe place for future reference.
3 En POWER-CORD CAUTION Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc.
4 En Contents For those operating Serato DJ for the first time using this unit and its accessories See the “Quick Start Guide - Serato DJ Edition” for the procedure for making the initial settings required to use the CONTROL CD or CONTROL VINYL included with this unit in order to operate Serato DJ.
5 En Before start Before start Features This unit is a 4-channel mixer optimally designed for DJ performances using the “Serato DJ” DJ software by Serato.
6 En Installing the software Installing the driver software This driver software is a proprietary program for inputting and outputting audio signals from the computer. To use this unit connected to a computer on which a Windows or Mac OS is installed, install the driver software on the computer beforehand.
7 En Installing the software ! Read Software end user license agreement carefully before installing this unit’s proprietary driver software. ! Before installing the driver software, terminate all other programs running on your computer. ! The driver software is compatible with the following OSs.
8 En ! Operation is not guaranteed on all computers, even if all the required operating environment conditions indicated here are fulfilled. ! Depending on the computer’s power-saving settings, etc., the CPU and hard disk may not provide sufficient processing capabilities.
9 En 11 Read the terms of the license agreement carefully, and if you agree, click [Agree]. ! If you do not agree to the contents of the usage agreement, click [ Disagree ] to cancel installation. 12 If the following screen appears, drag and drop the [Serato DJ] icon on the [Applications] folder icon.
10 En Connections Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. Connect the power cord after all the connections between devices have been completed. Be sure to use the included power cord.
11 En Connections Connecting input terminals ! When creating a DVS (Digital Vinyl System) combining a computer, audio interface, etc., be careful in connecting the audio interface to this unit’s input terminals and in the settings of the input selector switches.
12 En Connecting to the control panel B AT HRU M ASTER 0 MIXING LEVE L PHONES CUE LEVEL DIGITAL CD / LINE PHO HI MIC 1 MIC 2 0 0 TRIM OVER 10 7 4 2 1 0 MIC USB MIC1 Be sure to connect using the included USB cable. Headphones Microphones Computers 1 2 3 4 1 MIC1 terminal (page 15) Connects a microphone here.
13 En Operation Operation Control Panel LEVE L US B DIGITAL CD / LINE PHON O 1/ 2 HI MIC 1 MIC 2 HI LO W EQ EQ / 12 12 12 12 0 0 ON TALK OVER OF F SPAC E NOIS E CU E CU E CUE CRUSH FILTE R DUB ECH O G.
14 En g COLOR control (page 16) This changes the parameters of the SOUND COLOR FX of the different channels. h Channel Fader (page 14) Adjusts the level of audio signals output in each channel. i CROSS FADER ASSIGN (A, THRU, B) selector switch (page 14) Sets the output destination of each channel to [ A ] or [ B ].
15 En Operation Switching the fader curve Select the channel fader curve characteristics Switch the [CH FADER ( , , )] selector switch. — [ ]: The curve rises suddenly at the back side.
16 En ! Depending on the playing status of Serato DJ or the DJ player (off air, scratch - ing, playing in reverse, etc.), it may not be possible to receive the GRID information. 2 Press the [ON/OFF] button of [BEAT EFFECTS] or touch the [X-PAD]. The effect is added to the sound in tempo with the track being played.
17 En Operation — [ AUTO ]: The BPM is measured automatically from the audio signal that is being input. The [ AUTO ] mode is set when this unit’s power is turned on. — [ TAP ]: The BPM is input manually by tapping the [ TAP ] button with a finger.
18 En [ SND/RTN ] [ 1/7 ] [ 2/7 ] [ 3/7 ] [ 4/7 ] [ 5/7 ] [ 6/7 ] [ 7/7 ] 3 Press the [BEAT c , d ] button. Set the MIDI signal’s waveform output time. 4 Press the [ON/OFF] button of [BEAT EFFECTS] or touch the [X-PAD]. The MIDI message for turning the effect on is sent.
19 En Types of effects Types of effects Types of SOUND COLOR FX effects Effect Name Descriptions [ COLOR ] control SPACE Applies a reverberation effect to the original sound. Turn counterclockwise: Applies the reverberation effect to the mid- and low ranges.
20 En X-PAD (parameter 4) The cycle at which the cut-off frequency is moved fluctuates finely. FLANGER 1 A 1-cycle flanger effect is produced according to the beat fraction set with the [ BEAT c , d ] buttons.
21 En The MIDI signal waveform pattern switches each time the [ LFO FORM ( WAKE UP )] button is pressed. BEAT c , d buttons (parameter 1) Use these to set a waveform output time of 1/4 – 64/1 with respect to one beat of the BPM. TIME control (parameter 2) Use this to set the waveform output time.
22 En MIDI assignment map MIDI assignment map ! “CC” is the abbreviation of “control change”. A control change is a type of MIDI signal used to transmit various types of control information, such as timbre, volume, etc. On this unit, values from 0 to 127 are output as CC mainly when controls and faders are operated.
23 En Category Button/Control/Switch MIDI assignment Trigger/Toggle Transmitted data Name Type BEAT EFFECTS CH SELECT CH1 Switch CC 034 2 OFF=0, ON=127 CH2 Switch CC 035 2 OFF=0, ON=127 CH3 Switch CC 036 2 OFF=0, ON=127 CH4 Switch CC 037 2 OFF=0, ON=127 MIC Switch CC 038 2 OFF=0, ON=127 CF.
24 En Changing the settings 1 Press the [ON/OFF (UTILITY)] button for over 1 second. The [ USER SETUP ] mode setting screen is displayed. ! To display the [ CLUB SETUP ] mode setting screen, first turn this unit’s power off, then press the [ POWER ] button while pressing the [ ON/OFF ( UTILITY )] button.
25 En Click the [MIXER INPUT] tab. Setting the audio data output from this unit to the computer When Serato DJ is running and using this unit as the default audio device, set the audio data output in Serato DJ. Display the setting utility before starting.
26 En Additional information Troubleshooting ! Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component.
27 En Additional information Block Diagram Master Limiter [BEAT EFFECT ( SND/ RT N ) ] Effect CH Select Effect CH Select Effect Out CableCheck RETURN SEND Out CHx CF A/B MIC Master CHx CF A/B MIC Mast.
28 En Acquiring the manual The operating instructions may be in a file in PDF format. Adobe ® Reader ® must be installed to read files in PDF format. If you do not have Adobe Reader, please install it from the download link on the CD-ROM’s menu screen.
29 Specifications General Power requirements ................................................................................ AC 120 V, 60 Hz Power consumption ...........................................................................................
30 En.
31 UCP0212 PIONEER ELECTRONICS (USA) IN C. LIMITED W ARRANTY W ARRANTY V ALID ONL Y IN THE U. S. A. AND CANAD A W ARRANTY Pioneer Electronics (USA) Inc.
<DRB1687-A> Printed in © 2013 PIONEER CORPORA TION. All rights reser ved. To register your product, find the nearest authorized se rv ice location, to purchase replacement parts, operating inst.
An important point after buying a device Pioneer DJM-900SRT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pioneer DJM-900SRT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pioneer DJM-900SRT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pioneer DJM-900SRT you will learn all the available features of the product, as well as information on its operation. The information that you get Pioneer DJM-900SRT will certainly help you make a decision on the purchase.
If you already are a holder of Pioneer DJM-900SRT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pioneer DJM-900SRT.
However, one of the most important roles played by the user manual is to help in solving problems with Pioneer DJM-900SRT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pioneer DJM-900SRT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
